Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Structural joints and bearings
(50)
Structural joints and bearings for buildings for movement accommodation, load transfer and structural integrity. Expansion and movement joint systems, gap covers and seals. Elastomeric, pot and sliding bearings for columns, beams and facades. Seismic and thermal movement control. Vibration damping, waterproofing and fire-rated joints. For commercial, industrial and civil structures.
Structural joints and bearings - helping you find the best solution for your project.
CS gasketed floor expansion joint covers
The CS range of gasketed expansion joint covers is suitable for a wide range of applications, including shopping centres, hospitals and schools. Available in different sizes, they can be surface- or recess-mounted, and have a minimal exposed surface, along with a sealable gasket for infection control. Can be used in conjunction with carpets
Allway® - expansion joint covers
Allway® expansion joint covers are made to bridge structural gaps in buildings, allowing for safe movement caused by thermal changes, settlement, wind sway or seismic activity. The range includes floor, wall, ceiling, parking and exterior joint covers, with options for fire, moisture and acoustic barriers. Covers suit a variety of building types- PRODUCT
Construction Specialties
CS Expansion Joint Covers for Car Parks - ZB series
Zip Block (ZB) is a one-piece, extruded EPDM elastomeric seal with integral nosings, which is bonded to the substrate with high strength epoxy adhesive. This watertight floor joint cover system system can be installed over green concrete and is also suitable for retro-fit applications. Much stronger than traditional elastomeric concrete systems
AL-HD Series heavy-duty aluminium floor joint covers
Heavy-duty aluminium recess-mounted floor joint covers utilising a free-floating centre plate held in position by cover plates, offering horizontal movement range up to 100% of the joint width. These covers can be used in areas with some vehicular access and are suitable for interior and exterior applications. For areas where trolley traffic is
GFT Series - embedded expansion joint covers for interior floors
Standard GFT floor expansion joint covers are suitable for interior floor joints up to 50mm wide. Available in four frame depths to suit project requirements. Covers can be fitted flush to the floor screed or left proud to butt up to a carpet or vinyl finish. Floor frames: natural, clear anodised finish. Support / wall frames: mill finished as standard
CS expansion joint cover strips and plugs
CS offers a range of simple-to-install expansion joint cover strips and plugs to suit a variety of floor and ceiling applications. They are an easy, efficient solution to covering an expansion joint. Wall plugging sections are made from extruded synthetic rubber and are suitable for interior and exterior applications. Rigid strips provide an- PRODUCT
Construction Specialties
CS expansion joint covers for car parks
Expansion gasketed and all metal expansion joint covers are available to meet the demanding movement conditions found in parking structures, both interior and exterior- PRODUCT
Construction Specialties
CS Expansion Joint Covers for Floors - Metal
The CS range of Metal Expansion Joint Covers is suitable for a wide range of applications, including shopping centres, hospitals, airports, and schools. These highly durable, aluminium covers are available in a range of sizes, surface or recess mounted options and in standard and heavy duty designs. They have a high movement range of up to ±100mm
DGTR Series - CS gasketed floor joint covers
DGTR Series recessed floor expansion joint covers are designed for interior floor joints up to 110mm wide and offer up to +/-38mm horizontal movement. Their aluminium centre plate has a 3.2mm deep recess to accept a vinyl floor, bonded carpet or other floor finish for maximum concealment. It can be installed over a range of joint widths, or over
CS Floor Expansion Joint Covers - APF series
The APF Floor Expansion Joint Covers are recess mounted and are highly resistant to rolling loads, distortion, and wear. They can be mixed and matched if required, and there are five frame depths available. Cover plates and exposed frame sections are serrated to provide an anti-slip surface: aluminium sections are mill finished as standard. Wall
CS expansion joint covers for walls and ceilings
The CS range of expansion joint covers includes options for interior and exterior applications in walls or ceilings (drywall to suspended). Wall and ceiling joint covers perfectly match CS's range of floor joint covers. Options: gasketed or all-metal variants; surface- and recess-mounted- PRODUCT
Construction Specialties
CS Expansion Joint Covers for Car Parks - KB series
The all-metal KB Series of expansion joint covers are designed for parking structures. They feature a patented turnbar housing which reduces lateral load damage, along with a specially designed centre plate to offer maximum strength yet minimal interference with pedestrians. KB joints are supplied with a moisture barrier as standard, with an- PRODUCT
Construction Specialties
DGTP and GTP Series gasketed floor joint covers
Recess-mounted gasketed floor covers designed for applications with large movement requirements. These flush fitting covers are pedestrian and wheel friendly and are easy to clean and maintain, making them suitable for interiors where hygiene is important. Two depths are available to suit project requirements. 30mm deep DGTR models can be
JDN Series compression strips for walls
Made of extruded synthetic rubber, JDN Series compression strips are suitable for interior and exterior wall applications or ceilings. These flexible compression strips are suitable for most wall and ceiling finishes, provide a clean finish, and are straightforward to apply. The strips are simply compressed and pushed into the joint, or fitted- PRODUCT
Construction Specialties
Expansion joints - Banbury station multi-storey car park
As part of a £10million investment by the Department of Transport, a new multi-storey car park has been completed at Banbury train station, offering passengers improved access. To meet the demanding structural movement conditions expected in the car park, C/S supplied and installed 90 metres of Zip Block 200 (ZB-200), a one-piece
Expansion joints and entrance matting for sports venue
Construction Specialties (CS) supplied a range of expansion joint covers and entrance matting for a sports venue widely-regarded as the finest in Europe. The new stadium, home to one of the Premier League's leading teams, is located in north London. It is a 62,000-seat multipurpose facility that features the world’s first dividing, retractable- PROJECT
Construction Specialties
Expansion joint covers – Bolton Interchange Bus Station
Bolton’s newly configured transport hub supports a wider regeneration of the town centre, combining bus services, cycle storage and shop-mobility facilities with retail and office space. A range of CS Allway expansion joint covers were specified to meet the project’s functional and aesthetic requirements- PROJECT
Construction Specialties
Custom expansion joint for glass walkways
CS designed a custom expansion joint cover to meet the movement needs of the glass walkways at the Bristol Life Sciences building at Bristol University. A central atrium connects two separate blocks of the building with glass walkways between buildings on floors 1, 2 and 3- PROJECT
Construction Specialties
The Z-Flex profile is a flexible profile that comes in many finishes and sizes. They are formed in such a way so they can be easily bent into rounded shapes, curving it either inward or outward. Durosol - Brass (DSM): natural and high gloss polished with peel off strip. - Aluminium (DSA): natural, silver anodised and gold anodised. - Stainless- PRODUCT
- Dural UK
Dural specialises in producing bespoke movement joints for ceramic and hard flooring installations. Effective in protecting hard floor coverings from the stresses that cause cracking, tenting or popping, the movement joints are part of Durals wide of range of trims and accessories for flooring. Bespoke movement joints for interior and exterior
Structural joints and bearings - helping you find the best companies for your project.
Construction Specialties
Construction Specialties (UK) Ltd is a global supplier and manufacturer of specialised building products. Our range of products include wall protection systems, solar shading, expansion joint covers, entrance matting systems, and louvres. They have been installed in buildings across various sectors such as Healthcare, Transport, Retail, Education
1010 Westcott Venture Park, Westcott, Aylesbury, HP18 0XBACM Bearings
Wath West Industrial Estate, Derwent Way, Wath-upon-Dearne, Rotherham, S63 6EXAdvanced Elastomer Systems
ExxonMobil House, Ermyn Way, Leatherhead, KT22 8UXBluebird Fixings
Established in August 1988 to produce for a new concept for connecting new walls to existing buildings at right angles, such as garage extensions. Bluebird Fixiing's product range has been expanded since then and now includes door cramps, as well as wire balloons to prevent birds from nesting and/or falling down chimneys, thus removing the hazard
Westminster Road Industrial Estate, Station Road, North Hykeham, Lincoln, LN6 3QY
