Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Structural waterproofing
Structural waterproofing for basements, podium decks, tunnels and substructures. Type A, B and C systems to BS 8102. Sheet and liquid-applied membranes, cavity drain systems, cementitious slurries and waterproof concrete. Waterstops, injection resins, joint sealants and protection boards. Drainage composites, primers and accessories for new build and refurbishment.
Structural waterproofing - helping you find the best solution for your project.
Delta MS Drain (Geotextile external drainage layer)
MS Drain serves as a drainage layer with fused-on geotextile. Sheet features a high compressive strength of c. 500kN/m² as well as more than 8,900 dimples/m². Featuring a contact area four times greater than that of conventional dimpled sheets allowing for greater distribution of pressure on the waterproofing. Fused-on hydrophilic geotextile- PRODUCT
Delta Membrane Systems
MemTech Pro Titan Tank - waterproof and ground gas membrane
MemTech’s Pro Titan Tank is a post applied waterproof and ground gas membrane which offers a safe solution for the protection of buildings, structures and occupiers against all levels of Hydrocarbons, VOCs, Methane, Carbon Dioxide and Radon gas ingress. MemTech Pro Titan Tank is a post applied waterproof and hydrocarbon barrier gas membrane. This- PRODUCT
Delta Membrane Systems
Delta Type C cavity drainage waterproofing systems
Delta's Type C cavity drainage waterproofing system comprises a cavity drain membrane, drainage system, package pump and control system. It is a maintainable basement waterproofing solution for new-build basements, refurbishment and retrofit projects. Type C waterproofing is defined as “drained protection”, where the structure itself provides- PRODUCT
Delta Membrane Systems
Delta PT - waterproof membranes for walls, vaults and basements
Delta PT is a high-performance polyethylene membrane used to insulate and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant seal. The 8mm stud design of Delta PT provides a continuous air gap- PRODUCT
Delta Membrane Systems
Delta MS 500 Fire - fire-retardant Type C cavity drain membrane
Delta MS 500 Fire Retardant is an 8mm-thick studded Type C cavity drainage membrane that has been manufactured with DELTASAFE, an innovative fire-retardant property which enables the product to achieve a Euroclass rating of B-S2, d0 in accordance with EN 13501-1:2018. This fire-retardant high-density polyethylene (HDPE) membrane has an 8mm- PRODUCT
Delta Membrane Systems
Delta MS 500 - 8mm cavity drain membrane
DELTA MS 500 - 8mm cavity drain membrane. Type C Drained Protection. BBA approved. Supplied in 2.4 / 2.0 x 20m rolls
Newton CDM System 500 - Type C cavity drain waterproofing system
Newton CDM System is a Type C cavity drain waterproofing system designed to manage water ingress in basements and below-ground structures. System includes BBA certified membranes, drainage conduits, sump chambers, pumps, and control systems. Suitable for new-build and refurbishment projects where a dry internal environment is required: cavity- PRODUCT
Newton Waterproofing
Delta Plaster Lath - 7mm meshed damp proofing membrane
Delta Plaster Lath is an easy to use 7mm meshed damp proofing membrane system which eliminates dampness, the effects of salts and contaminated backgrounds from walls. The meshed key surface provides a key for render, plaster, or dab fixing plasterboard. Delta Plaster Lath's dimpled design creates an air gap, which insulates and allows for- PRODUCT
Delta Membrane Systems
Delta fire-retardant, Type C waterproofing
Delta’s fire-retardant MS 500 membrane gives a unique opportunity to the structural waterproofing sector for Type C systems to be used in reducing the spread of fire, or where installation has not previously been possible for fire safety reasons. Delta MS 500 Fire offers a B-S2, d0 Euroclass fire rating (EN 13501-1:2018) whilst maintaining its- PRODUCT
Delta Membrane Systems
Delta Plaster Lath - 8mm cavity meshed membrane
The Delta Plaster Lath high performance polyethylene meshed membrane is used for above and below ground waterproofing and damp-proofing internal and external walls, vaulted ceilings. It can be used in new constructions or in existing buildings over a contaminated or damp background. The membrane is extruded into a series of studs which create a- PRODUCT
Delta Membrane Systems
RIW R20 is an internal cavity drainage membrane system used to collect water entering basements and sub-structures and channel it to a sump or collection point for disposal. It is used in particular where site conditions or structural design makes it difficult or impossible to use traditional tanking methods. A 1mm thick high density polyethylene
Structural waterproofing - helping you find the best companies for your project.
Delta Membrane Systems
Manufactures cavity drainage membrane systems for internal and external damp-proof control and gas resistance. The polyethylene membranes feature studs which create a continuous air gap behind the membrane, to isolate walls from new finishes and to allow ventilation of the wall. The membranes can be used externally as a waterproof protection and
DELTA House, Merlin Way, North Weald, Epping, CM16 6HRNewton Waterproofing
The Newton System 100 range of cement-based is designed for making repairs to structural concrete. It can be used in conjunction with the Newton System 500 range of cavity drain membrane systems. The Newton System 500 range is designed to create an internally applied waterproofing system based on cavity drain membranes, drainage systems and
Newton House, 17-19 Sovereign Way, Tonbridge, TN9 1RHJUTA UK
Its waterproofing systems are a key part of any construction project, prevent the ingress of water into residential and commercial buildings
Melton Grove Works, Blackpool Road, Lytham, FY8 5PL
