Delta Membrane Systems - structural waterproofing

DELTA MS 500 - 8mm cavity drain membrane. Type C Drained Protection. BBA approved. Supplied in 2.4 / 2.0 x 20m rolls

The Delta Plaster Lath high performance polyethylene meshed membrane is used for above and below ground waterproofing and damp-proofing internal and external walls, vaulted ceilings. It can be used in new constructions or in existing buildings over a contaminated or damp background. The membrane is extruded into a series of studs which create a

Delta MS 500 Fire Retardant is an 8mm-thick studded Type C cavity drainage membrane that has been manufactured with DELTASAFE, an innovative fire-retardant property which enables the product to achieve a Euroclass rating of B-S2, d0 in accordance with EN 13501-1:2018. This fire-retardant high-density polyethylene (HDPE) membrane has an 8mm

Delta MS 20 is an HDPE, dimpled membrane with 20mm studs designed as a seepage layer for damp-proofing applications. Delta® MS 20 is used to waterproof floors, walls and vaulted ceilings where high drainage capacities are required in both above and below ground applications. Supplied in 2m x 20m rolls, DELTA® MS 20 can be applied as horizontal or

Delta Plaster Lath is an easy to use 7mm meshed damp proofing membrane system which eliminates dampness, the effects of salts and contaminated backgrounds from walls. The meshed key surface provides a key for render, plaster, or dab fixing plasterboard. Delta Plaster Lath's dimpled design creates an air gap, which insulates and allows for

Delta's Type C cavity drainage waterproofing system comprises a cavity drain membrane, drainage system, package pump and control system. It is a maintainable basement waterproofing solution for new-build basements, refurbishment and retrofit projects. Type C waterproofing is defined as “drained protection”, where the structure itself provides

NP Drain two-ply composite sheet drainage membranes are made from high density polyethylene. They have a high compressive strength and offer drainage and waterproofing for vertical and horiztonal appilications. NP Drain memebranes are comprised of a dimpled sheet that prevents water logging and a geotextile layer that filters out fine soil

Delta PT is a high-performance polyethylene membrane used to insulate and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant seal. The 8mm stud design of Delta PT provides a continuous air gap

Koster 21 is a 2-component, solvent-free, liquid applied, elastic, crack bridging waterproofing material that provides excellent adhesion to dry and moist substrates: liquid-applied - it is seamless, easing application to complicated architectural details; UV stable - suitable for indoor and outdoor use; its white color reflects sunlight and

Delta’s fire-retardant MS 500 membrane gives a unique opportunity to the structural waterproofing sector for Type C systems to be used in reducing the spread of fire, or where installation has not previously been possible for fire safety reasons. Delta MS 500 Fire offers a B-S2, d0 Euroclass fire rating (EN 13501-1:2018) whilst maintaining its

Koster Repair Mortar Plus is a fast setting, slightly expanding, watertight repair mortar made for use on mineral substrates. Suitable for internal and external repairs, it adheres well to old and new surfaces and can be used as a polymer-modified cement concrete mortar with Koster SB Bonding Emulsion

Delta Roof Guard cold liquid-applied waterproofing is based on the most advanced polyurethane technology. Being simple to install, fast-curing, flexible and long-lasting makes Delta Roof Guard suitable for use in all kinds of waterproofing projects, including flat or sloping roofs, podium decks, balconies, walkways, terraces, car parks and for

Koster SB Bonding Emulsion is a synthetic liquid additive for cement-based mortars, plasters, sealing slurries and concrete, made from a solvent, plasticiser, and filler-free dispersion. Increases flexibility, elasticity and water resistance in mineral systems, and improves bond strength and workability. Waterproof after application and suitable

Delta Amphibia is a BBA-approved, fully bonded 1.3mm pre- and post-applied waterproofing membrane for below-ground and earth-retained structures. Made from a co-extruded, multi-layer system with a hydroreactive, self-sealing core, it is suitable for vertical and horizontal applications in new construction

MS Drain serves as a drainage layer with fused-on geotextile. Sheet features a high compressive strength of c. 500kN/m² as well as more than 8,900 dimples/m². Featuring a contact area four times greater than that of conventional dimpled sheets allowing for greater distribution of pressure on the waterproofing. Fused-on hydrophilic geotextile