Damp / water protection

V-GARD ALU 1500 is a high-performance vapour control membrane made from reinforced aluminium foil with a self-adhesive hot-melt backing, designed for use in roofing systems over metal or wooden decks. Suitable for most roofs, it controls moisture movement and improves air tightness, supporting energy efficiency and insulation performance

DELTA MS 500 - 8mm cavity drain membrane. Type C Drained Protection. BBA approved. Supplied in 2.4 / 2.0 x 20m rolls

Probreathe® A2 is an airtight woven glass fibre membrane with a PU coating. The membrane combines breathability, good water resistance and airtightness in one membrane. It has a Reaction to Fire classification of A2-s1,d0 when installed free-hanging or onto a substrate which is minimum A2-s1,d0

Delta PT 3mm is a high-density polyethylene (HDPE) low-profile studded membrane designed for damp and contaminated walls, or where fast reinstatement of wall finishes is required after chemical damp-proof injection: suitable for damp-proofing; provides key for plaster, renders or dab fix; controls damp, salts and isolates other wall contaminants

The Delta Plaster Lath high performance polyethylene meshed membrane is used for above and below ground waterproofing and damp-proofing internal and external walls, vaulted ceilings. It can be used in new constructions or in existing buildings over a contaminated or damp background. The membrane is extruded into a series of studs which create a

Cementing Waterproof Strength: HydroCoat 107 Elastic 2K, a cementitious coating, ensures robust waterproofing and protection for concrete and masonry. Its spray application makes it perfect for large-scale projects, ideal for reservoirs, tunnels, water tanks, basements, podium decks, flat roofs, and balconies. Spray-Applied Precision: Tailored for

PC Leakinject UNI 6816 E is a single-component PU resin and catalyst with low viscosity suitable for water-sealing big gaps, cracks, or water leaks with high pressure or flow. Reacts in contact with water to form a semi-rigid foam: forms a hard, high-strength seal within the structural crack or joint; penetrates deep into fine structural cracks

Koster Injection Gel G4 is a low-viscosity, water-based acrylic gel made for curtain injection and sealing masonry against water ingress. Designed for waterproofing below-ground structures, it can be injected into fine pores and mortar joints, and is suitable for both new builds and repairs. Swells after curing to absorb extra water and is applied

Wrapseal is a flexible interface membrane designed to create a durable airtight and weathertight seal around windows, doors and other similar openings within the building envelope. The membrane’s flexible and fully self adhesive construction allows it to provide a continuous seal between the opening and the surrounding substrate, replacing

Wraptite® combines the best properties of a vapour-permeable membrane and an air barrier in one innovative, affordable, self-adhering product. It fully bonds (without mechanical attachment) to almost any substrate for air tightness and ease of installation, requiring minimal use of sealants or tapes. The Wraptite® air barrier prevents lateral air

Newton HydroCoat 905-CM is a water-based curing compound which inhibits the effects of sun and wind on liquid waterproofing membranes and so extends the curing time to ensure full cement hydration and full strength of the product. HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, which

BBA-certified, high-quality, 3mm cavity drain waterproofing membrane. Designed for use within the Newton CDM System for internally-applied waterproofing. For waterproofing earth-retained walls and vaulted soffits and floors. Guaranteed against deterioration for 30 years, with a life expectancy of the design life of the building

Fireshield® is a vapour-permeable and fire-retardant membrane for use on walls behind cladding. The unique coating eliminates fire spread rather than just resisting it. It is installed and fixed to the substrate in the same manner as standard breather membranes using mechanical fixings. Fire-proof surface - unique composition actively reacts to

NewCoat / DampSafe 901 Primer is a two-part, solvent-free, clear epoxy that is applied to damp and porous surfaces as a pre-primer prior to the application NewCoat / DampSafe 901 Primer, a vapour barrier and primer for newly placed, or damp, concrete and screed. The high quality, epoxy formulation allows for application onto damp surfaces, whilst

Diasen C.W.C Stop Condense is a white anti-condensation and anti-mould coating. It is latex-based and comprises specific mineral powders which, thanks to their insulating properties, keep surfaces to which it is applied warmer, eliminating any thermal bridge. Suitable for internal use, can be used to coat cold surfaces affected by condensation and

Koster Repair Mortar NC is a fibre-reinforced repair mortar and plaster made for structurally-relevant repair, touch-up of voids and levelling of concrete defects. Suitable for horizontal and vertical surfaces, it has high adhesion to mineral substrates, low shrinkage and strong chemical and mechanical resistance

NewSeal 408 DeckDrain is a drainage membrane for decks and flat roofs. It is double cuspated, has drainage studs to the upper and lower surfaces, and incorporates a polypropylene geotextile filter layer, bonded to a water-impermeable HDPE (High-Density Polyethylene) core. The double cuspated design gives drainage two layers: firstly, allowing for

Facadeshield FR Class B is a vapour-permeable membrane with a monolithic construction, designed for use as a breather membrane in external wall systems. It allows the passage of water vapour while providing reliable resistance to external moisture in accordance with relevant industry standards. The monolithic structure supports long-term

HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable HDPE (High-Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides outstanding drainage and protection to the outside face of basement walls, preventing the build-up of water pressure and

MS Drain serves as a drainage layer with fused-on geotextile. Sheet features a high compressive strength of c. 500kN/m² as well as more than 8,900 dimples/m². Featuring a contact area four times greater than that of conventional dimpled sheets allowing for greater distribution of pressure on the waterproofing. Fused-on hydrophilic geotextile

Delta DualProof is a pre-applied, fully-bonded Type A waterproofing membrane made from a soft PVC layer co-extruded with a non-woven PP fleece. Designed for below-ground reinforced concrete structures, it forms a permanent mechanical bond with concrete to prevent water tracking and is suitable for both horizontal and vertical applications

Delta provides high-performance external drainage protection systems for external basement walls or to protect underlying waterproofing from backfill damage: geo-Drain Quattro - drainage and protection membrane; floraxx Top - external drainage membrane for green roofs; terraxx - protection and drainage system for horizontal application; NP Drain

Procheck A2, with its Class A2-s1,d0 fire classification to BS EN 13501-1, is considered non-combustible with no contribution to fire. Its composition comprises of the glass fibre backing, with a pure aluminium foil and clear lacquer coating. This composition affords the membrane its Class A2 performance as well as giving it a high degree of

Façadeshield UV is a vapour control layer designed to ensure the building fabric maintains good water resistance and breathability behind open-jointed cladding. It is a non-woven breathable membrane that combines water resistance and UV resistance with an aesthetically-pleasing dark colour to provide a 'shadow' appearance within open rainscreen