Newton Waterproofing - structural waterproofing

Newton HydroBond is a Type A waterproofing system designed to provide a complete and continuous external waterproof envelope for below-ground structures. British Standard 8102:2009 defines Type A waterproofing as a barrier protection applied to internal or external surfaces of a structure in order to resist the pressure of water trying to enter

NewSeal 408 DeckDrain is a drainage membrane for decks and flat roofs. It is double cuspated, has drainage studs to the upper and lower surfaces, and incorporates a polypropylene geotextile filter layer, bonded to a water-impermeable HDPE (High-Density Polyethylene) core. The double cuspated design gives drainage two layers: firstly, allowing for

Newton CDM is a BBA-certified cavity drain membrane from the Newton System 500 range. Used in conjunction with bespoke sump and pump configurations, backup systems, telemetry and ancillary options, Newton CDM provides a reliable and maintainable 'Type C' waterproofing solution for any habitable below-ground space that needs to be completely dry

Oldroyd® Xtf is a waterproof, fire-resistant membrane designed to protect tunnels from the damaging effects of dripping water. It consists of a profiled, studded and grooved flame-retardant polypropylene (PP) sheet, approximately 1mm thick, onto which is laminated a high tensile strength, fire-resistant woven fabric of basaltic mineral fibres. The

Newton HydroTank is a range of BDA-certified waterbars, waterstops, flanges, sealants and capillary-blocking treatments designed to prevent water penetration through concrete in below-ground structures. HydroTank products are applied to joints and other areas of concrete which are at risk of not otherwise watertight, in order to achieve a Type B

Newton CDM 508 is a BBA-certified, high-quality, 8mm cavity drain waterproofing membrane. It is designed for use within the Newton CDM System for internally applied waterproofing that includes drainage and pumping systems. CDM 508 is suitable for waterproofing earth retained walls and vaulted soffits and floors. It is guaranteed against

DampSafe 603 Tile D-Mat is a composite decoupling mat with an installation height of just 3mm. The blue LDPE (low-density polyethylene) dimpled core has a polypropylene fleece heat-welded to both the upper and lower surfaces, which quickly absorbs adhesives to provide an exceptional bond to both the substrate below and the tiled floor finish

HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable HDPE (High-Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides outstanding drainage and protection to the outside face of basement walls, preventing the build-up of water pressure and

A reinforcement tape for covering cracks, joints, and changes in direction alongside Newton’s liquid-applied waterproofing membranes and coatings: reinforcement of changes in direction for tanking and deck waterproofing; formation of covered membrane joints; reinforcing liquid membranes over static construction joints. A spun-bond polypropylene

Newtonite 801 Mastic is a non-toxic, solvent-free, multipurpose silicone sealant primarily used with the Newlath 805 Mesh Membrane and Newtonite 803 Membranes - applied to the plug before fixing into the membrane, Newtonite 801 Mastic seals the penetration and prevents bridging between the damp substrate and new internal surface. Applied to the

HydroTank 315 Waterbar is a hydrophilic, acrylate polymer waterbar, which swells when activated by moisture. it is characterised by high elasticity and high tensile strength. HydroTank 315 Waterbar can be used to seal the structure against water leaks to cast-in-place concrete construction joints. The swelling is achieved through hydrophilic

PC Leakinject UNI 6816 E is a single-component PU resin and catalyst with low viscosity suitable for water-sealing big gaps, cracks, or water leaks with high pressure or flow. Reacts in contact with water to form a semi-rigid foam: forms a hard, high-strength seal within the structural crack or joint; penetrates deep into fine structural cracks

BBA-certified, high-quality, 3mm cavity drain waterproofing membrane. Designed for use within the Newton CDM System for internally-applied waterproofing. For waterproofing earth-retained walls and vaulted soffits and floors. Guaranteed against deterioration for 30 years, with a life expectancy of the design life of the building

HydroBond 914-RT is a non-woven polypropylene reinforcement tape used with HydroBond 108-LM and HydroBond 109-LM liquid applied membranes and coatings to reinforce detailing around protrusions such as service pipes and over static construction and day joints and covered movement joints. Used with HydroBond 108-LM and HydroBond 109-LM for the

HydroBond 403 Plus is an extremely high-performance composite sheet waterproofing membrane featuring a locking fleece to one side and a polymer hydrophilic coating to the other. When situated under the new raft or against the wall shuttering the poured concrete engages into the locking fleece so that the membrane is completely locked in and