Protective paints and coatings

AG3 removes aerosol paint, permanent marker pen, crayons and lipstick from non-porous surfaces such as glass, glazed tiles, metal and anti-graffiti coatings. Supplied in 500ml trigger sprays or in 5 or 25 litre drums

Handycoat® EZ Skim is a specially designed ready-to-use filler and board skimming compound that is very easy to apply on most interior building surfaces including gypsum board and sand / cement render. Enhanced skimming and sanding properties make it extra user-friendlier. Handycoat® EZ Skim leaves a high-quality, even surface ready for painting

Nu-Guard® AG Clear is an anti-graffiti coating system for protecting exterior substrates against graffiti and fly-posting. The clear single-pack urethane-based coating cures to a hard finish. Graffiti is washed away using warm soapy water and will not leave any ghosting. Provides up to 12 years of protection

Hydron's graffiti removal products provide a clean internal or external surface on which to add a protective paint or coating to prevent damage from recurring. All removers are environmentally-friendly and can be used on brickwork, concrete, glass, metal and also road signs. They can get rid of spray paint, permanent marker pen and crayon quickly

Nu-Guard® SR Masonry is a hydrophobic water-based, decorative, protective exterior masonry coating. It utilises silicone resin technology to provide a superior decorative weather-resistant barrier with a self-cleaning function, improved durability and dirt pick-up resistance, maintaining a cleaner surface for longer. Due to the hydrophobic nature

Nu-Cryl AG is a clear, hydrophobic impregnation coating that gives long life protection against graffiti and pollution. It is used on facing bricks, sandstone, limestone, reconstructed stone and concrete blockwork. Its application does not noticeably change the appearance of the substrate. Due to its excellent stain-resistant and water-repellent

Nu-Guard NRG Colour Topcoat (HPC15) is a coloured external coating system that uses advanced hybrid chemistry to produce a superior protective coating against weather for masonry walls and bricks. It is designed to be applied in a single coat, following a two-coat application of NRG Colour Primer (HPC 16): improves energy efficiency in homes

Delta water-based epoxy resin is a twin-pack, water-based epoxy coating made for waterproofing and protecting concrete and masonry. Applied like emulsion paint, it can be used on damp surfaces and dries to a tough, non-toxic, easy-to-clean finish. Suitable for use as a damp-proof membrane, wall coating or tank lining, with a range of colours and

Nu-Guard AG® Colour is a single-pack, external coating designed to provide protection against fly-posting and graffiti. It is a single-application coating that will prevent graffiti from adhering to the surface and, once dry, the graffiti can be removed quickly and easily using warm soapy water. Can be specified in any RAL colour. Gloss or Semi

SL1 Shadow Lifter is a specifically formulated alkaline cleaner for the removal of stubborn graffiti shadows from brickwork, stone and concrete. It will effectively remove unsightly graffiti shadows that remain after graffiti removal, and will also remove general soiling and staining from brickwork. 5m2/litre Supplied in 5 litre jerry cans

Hydron's clear anti-graffiti coatings are suitable for internal and external spaces, especially those where the wall substrate cannot be changed. The clear anti-graffiti coatings can be used on new buildings or to give rendering a natural finish. Range: Nu-Cryl AG; Nu-Cryl AG Extra; Nu-Guard AG Clear; Nu-Guard AG Glaze; Nu-Sil WB. All coatings are easy

Koster Bitumen Primer is a cold-applied, low odour, solvent containing bitumen primer. It contains a bonding agent admixture and displays excellent penetration properties. It acts as a dust binder and as a bonding agent for subsequent hot or cold applied liquid bitumen coatings and self-adhesive membranes: all absorbent mineral surfaces, metal

Nu-Guard AG High Solids is a two-pack polysiloxane-based, high solids, anti-graffiti coating for use on external surfaces including painted brickwork, render, concrete, metal and timber. It has an excellent decorative appearance and high resistance to solvents and chemicals. The two-pack system comprises of one coat of Nu-Guard Tack Primer and one

Nu-Guard AG Tack Primer is a high performance water soluble, off white epoxy coating providing first class adhesion to properly prepared surfaces. The primer is the initial coat of the Nu-Guard® AG System and has been developed to act as a tack primer over existing coatings and non porous substrates, including glazed tiles. Surfaces to be treated

Nu-Cryl® AG Extra (HPC 46) is a clear, hydrophobic impregnation, anti-graffiti coating system. It is designed for use on dense, non-porous substrates such as external walls made of granite, marble, brick, polished concrete and GRC. Due to its excellent stain resistant and water repellent qualities, Nu-Cryl AG enables dirt, pollution, and graffiti to be