Structural protection products on BUILDING DESIGN. Helping you find the best product for your project.
1-15 of 263
  • A Proctor Group: Wraptite® air and vapour control barrier
    Wraptite® air and vapour control barrier
    A Proctor Group
    Product, 01 March 2021
    Product
    SAVE Product
  • Hydron Protective Coatings: SL1 - shadow lifter for removing ghost graffiti marks
    SL1 - shadow lifter for removing ghost graffiti marks
    Hydron Protective Coatings
    Product, 12 December 2019
    Product
    SAVE Product
  • Delta Membrane Systems: DELTA sealed structural waterproofing systems
    DELTA sealed structural waterproofing systems
    Delta Membrane Systems
    Product, 09 October 2019
    Product
    SAVE Product
  • Newton Waterproofing: Newton 520 Eco cavity drain waterproofing membrane
    Newton 520 Eco cavity drain waterproofing membrane
    Newton Waterproofing
    Product, 11 September 2020
    Product
    SAVE Product
  • Delta Membrane Systems: KÖSTER Polysil® TG 500 - Anti-Lime primer
    KÖSTER Polysil® TG 500 - Anti-Lime primer
    Delta Membrane Systems
    Product, 30 October 2019
    Product
    SAVE Product
  • Newton Waterproofing: Newton HydroSeal internal 'Type A' waterproofing system
    Newton HydroSeal internal 'Type A' waterproofing system
    Newton Waterproofing
    Product, 16 October 2018
    Product
    SAVE Product
  • BA Systems: DriMax™ A1 non-combustible Cavity Trays
    DriMax™ A1 non-combustible Cavity Trays
    BA Systems
    Product, 28 September 2021
    Product
    SAVE Product
  • A Proctor Group: Procheck 300 lightweight, reinforced, polyethylene, vcl
    Procheck 300 lightweight, reinforced, polyethylene, vcl
    A Proctor Group
    Product, 02 August 2019
    Product
    SAVE Product
  • Newton Waterproofing: Newton HydroTank 'Type B' waterproofing system
    Newton HydroTank 'Type B' waterproofing system
    Newton Waterproofing
    Product, 16 October 2018
    Product
    SAVE Product
  • Hydron Protective Coatings: AG2 - graffiti remover for sensitive signs and plastics
    AG2 - graffiti remover for sensitive signs and plastics
    Hydron Protective Coatings
    Product, 12 December 2019
    Product
    SAVE Product
  • Newton Waterproofing: Newtonite damp-proofing system
    Newtonite damp-proofing system
    Newton Waterproofing
    Product, 04 December 2018
    Product
    SAVE Product
  • A Proctor Group: Reflectatherm Premier & Reflectatherm Plus VCL
    Reflectatherm Premier & Reflectatherm Plus VCL
    A Proctor Group
    Product, 02 October 2018
    Product
    SAVE Product
  • Delta Membrane Systems: DELTA® MS-500 8mm cavity drain membrane
    DELTA® MS-500 8mm cavity drain membrane
    Delta Membrane Systems
    Product, 31 October 2019
    Product
    SAVE Product
  • Newton Waterproofing: Newton CDM 'Type C' drained waterproofing system
    Newton CDM 'Type C' drained waterproofing system
    Newton Waterproofing
    Product, 02 September 2021
    Product
    SAVE Product
  • Newton Waterproofing: Newton 403 HydroBond hydophilic and bonding membrane
    Newton 403 HydroBond hydophilic and bonding membrane
    Newton Waterproofing
    Product, 11 September 2020
    Product
    SAVE Product
  • A Proctor Group: Wraptite® air and vapour control barrier
    Wraptite® air and vapour control barrier
    A Proctor Group
    Wraptite® combines the best properties of a vapour permeable membrane and an air barrier in one innovative, affordable self-adhering product. It fully bonds (without mechanical attachment) to almost any substrate for air...
    SAVE Product
  • Hydron Protective Coatings: SL1 - shadow lifter for removing ghost graffiti marks
    SL1 - shadow lifter for removing ghost graffiti marks
    Hydron Protective Coatings
    SL1 Shadow Lifter is a specifically formulated alkaline cleaner for the removal of stubborn graffiti shadows from brickwork, stone and concrete. It will effectively remove unsightly graffiti shadows that remain after graffiti...
    SAVE Product
  • Delta Membrane Systems: DELTA sealed structural waterproofing systems
    DELTA sealed structural waterproofing systems
    Delta Membrane Systems
    DELTA sealed systems are recommended for below ground waterproofing where soil is retained, for example, basements and vaults. Membrane selection depends on the required finish and flow rate if applicable. All membrane junctions,...
    SAVE Product
  • Newton Waterproofing: Newton 520 Eco cavity drain waterproofing membrane
    Newton 520 Eco cavity drain waterproofing membrane
    Newton Waterproofing
    Newton 520 is a high quality, 100% recycled and BBA approved cavity drain membrane which can be used above basement floor areas. The 20mm studded membrane permits a massive flow rate to pass underneath the membrane and is...
    SAVE Product
  • Delta Membrane Systems: KÖSTER Polysil® TG 500 - Anti-Lime primer
    KÖSTER Polysil® TG 500 - Anti-Lime primer
    Delta Membrane Systems
    Köster Polysil® TG 500 is a deeply penetrating primer for damp, salt-containing substrates and an anti-lime treatment for new concrete. It also is compatible with mortars, plasters, cementitious slurries and concrete, and can...
    SAVE Product
  • Newton Waterproofing: Newton HydroSeal internal 'Type A' waterproofing system
    Newton HydroSeal internal 'Type A' waterproofing system
    Newton Waterproofing
    Newton HydroSeal is a range of 'Type A' internally-applied liquid membranes designed to reduce water flow rates through permeable substrates. It is typically used as a waterproofing system applied to flat soffits, or as a full...
    SAVE Product
  • BA Systems: DriMax™ A1 non-combustible Cavity Trays
    DriMax™ A1 non-combustible Cavity Trays
    BA Systems
    BA Systems offer the bespoke design and manufacture of stainless-steel cavity trays for buildings over 18m in height. With the 2018 ammendments to Document B, there has been an increased demand for these products. Stainless Steel...
    SAVE Product
  • A Proctor Group: Procheck 300 lightweight, reinforced, polyethylene, vcl
    Procheck 300 lightweight, reinforced, polyethylene, vcl
    A Proctor Group
    Procheck 300 is a lightweight, reinforced, polyethylene, vapour control layer for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The...
    SAVE Product
  • Newton Waterproofing: Newton HydroTank 'Type B' waterproofing system
    Newton HydroTank 'Type B' waterproofing system
    Newton Waterproofing
    Newton HydroTank is a range of BDA-certified waterbars, waterstops, flanges, sealants and capillary-blocking treatments designed to prevent water penetration through concrete in below-ground structures. HydroTank products are...
    SAVE Product
  • Hydron Protective Coatings: AG2 - graffiti remover for sensitive signs and plastics
    AG2 - graffiti remover for sensitive signs and plastics
    Hydron Protective Coatings
    A low-odour formulation of solvents for removing graffiti from sensitive surfaces and anti-graffiti coatings. Can be used on signs, polycarbornate glazing and plastics without affecting transparency. Effectively removes aerosol...
    SAVE Product
  • Newton Waterproofing: Newtonite damp-proofing system
    Newtonite damp-proofing system
    Newton Waterproofing
    Newtonite is a BBA-certified damp-proofing system designed to prevent rising damp through brickwork, stonework or mortar. It is suitable for all applications requiring the prevention of internal, above-ground damp problems. The...
    SAVE Product
  • A Proctor Group: Reflectatherm Premier & Reflectatherm Plus VCL
    Reflectatherm Premier & Reflectatherm Plus VCL
    A Proctor Group
    Reflectatherm Premier is a reflective vapour control layer for internal walls, ceilings and floors, with integrated tape for ease of installation. Designed to enhance the thermal performance when placed on the warm side of the...
    SAVE Product
  • Delta Membrane Systems: DELTA® MS-500 8mm cavity drain membrane
    DELTA® MS-500 8mm cavity drain membrane
    Delta Membrane Systems
    DELTA® MS-500 is an HDPE, dimpled cavity drain membrane with 8mm studs designed as a seepage layer for damp-proofing applications. DELTA® MS-500 cavity drain membranes can be used for waterproofing above and below ground on...
    SAVE Product
  • Newton Waterproofing: Newton CDM 'Type C' drained waterproofing system
    Newton CDM 'Type C' drained waterproofing system
    Newton Waterproofing
    Newton CDM is a BBA-certified cavity drain membrane from the Newton System 500 range. Used in conjunction with bespoke sump and pump configurations, backup systems, telemetry and ancillary options, Newton CDM provides a reliable...
    SAVE Product
  • Newton Waterproofing: Newton 403 HydroBond hydophilic and bonding membrane
    Newton 403 HydroBond hydophilic and bonding membrane
    Newton Waterproofing
    Newton 403 HydroBond is an extremely high performance composite sheet waterproofing membrane featuring a locking fleece to one side and a polymer hydrophilic coating to the other. When situated under the new raft or against the...
    SAVE Product