Structural protection

Newton HydroCoat 905-CM is a water-based curing compound which inhibits the effects of sun and wind on liquid waterproofing membranes and so extends the curing time to ensure full cement hydration and full strength of the product. HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, which

Combination waterproofing systems can offer optimal structural protection against water ingress. BS8102:2009 offers guidance on 3 types of Below Ground Level Waterproofing Systems used in the United Kingdom. These are categorised as Types: A, B & C. Type A Type A is defined as ‘barrier protection’. A material is used to offer a barrier to the

MemTech’s Pro Titan Tank is a post applied waterproof and ground gas membrane which offers a safe solution for the protection of buildings, structures and occupiers against all levels of Hydrocarbons, VOCs, Methane, Carbon Dioxide and Radon gas ingress. MemTech Pro Titan Tank is a post applied waterproof and hydrocarbon barrier gas membrane. This

MemTech’s Void Vent 25 offers a passive venting solution which facilitates the dispersal and dilution of dangerous gases. It has been designed to provide for high levels of air and / or gas flow. MemTech Void Vent is a cuspated HDPE core with a geotextile filter / separator bonded to a single side, in either 25 or 40mm depth

Proctorwrap Reflect® is a vapour-permeable, low-emissivity membrane specifically designed to enhance the thermal performance of timber and steel frame structures. This non-woven polypropylene foil laminate provides excellent breathability, as well as secondary protection to the building during construction. It is installed on the external face of

Delta FM is a damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve damp pressure equalisation. Various floor finishes can be achieved with zero ‘down time’ with this fast-track application. Delta FM

Probreathe® A2 is an airtight woven glass fibre membrane with a PU coating. The membrane combines breathability, good water resistance and airtightness in one membrane. It has a Reaction to Fire classification of A2-s1,d0 when installed free-hanging or onto a substrate which is minimum A2-s1,d0

Delta PT is a high-performance polyethylene membrane that has been specially designed with damp control in mind. It is used to insulates and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant

The Corden EPS Universal Gas Barrier is is a monolithic hybrid virgin polymer manufactured using the blown extrusion method. he membrane contains no recycled material, as a result, it is consistent and doesn’t include any bio-degradable content thus providing excellent results for gas permeation. It is a loose-laid system designed to protect the

The Delta Amphibia 1.3mm pre-applied membrane is a co-extruded multi-layer waterproofing membrane. It is a robust, tough but flexible waterproofing membrane suitable for all construction applications. Delta Amphibia 1.3mm is an EPDM waterproof membrane is available in two widths, reactive to contact with water, self-repairing, self-sealing and

Nu-Guard® NRG Clear is an energy saving protective coating for use on stone, brick, reconstructed stone, blockwork and tiles. The clear coating deeply impregnates into porous building material and chemically bonds within the capillary pores and to the surface of the substrate. As well as saving money

NewSeal 408 DeckDrain is a drainage membrane for decks and flat roofs. It is double cuspated, has drainage studs to the upper and lower surfaces, and incorporates a polypropylene geotextile filter layer, bonded to a water-impermeable HDPE (High-Density Polyethylene) core. The double cuspated design gives drainage two layers: firstly, allowing for

Nu-Guard AG Tack Primer is a high performance water soluble, off white epoxy coating providing first class adhesion to properly prepared surfaces. The primer is the initial coat of the Nu-Guard® AG System and has been developed to act as a tack primer over existing coatings and non porous substrates, including glazed tiles. Surfaces to be treated

The Newton PAC 500 (Positive Air Curtain) System is a combined basement waterproofing and ground gas mitigation system which successfully controls both water and gas levels within below ground / retaining structures. It can be installed to both new and existing projects, domestic and commercial. The patented system combines the Newton System 500

Pro Titan highly flexible, double-sided butyl tape is designed with a layer of release film on both sides to assist during installation. This multipurpose tape prevents water, water vapour, air and gas when used in conjunction with gas barriers, vapour control layers and damp-proof membranes. The tape’s flexibility enables installation on

HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable HDPE (High-Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides outstanding drainage and protection to the outside face of basement walls, preventing the build-up of water pressure and

Hydron's fire-retardant paint system for steel provides fire protection that complies with building regulations. Decorative finishes can be specified in gloss or semi-gloss colours to any standard BS or RAL colour. Nu-Flame steel paints are produced in water and solvent variants. Both are available in a range of fire protection options ranging

Newton CDM is a BBA-certified cavity drain membrane from the Newton System 500 range. Used in conjunction with bespoke sump and pump configurations, backup systems, telemetry and ancillary options, Newton CDM provides a reliable and maintainable 'Type C' waterproofing solution for any habitable below-ground space that needs to be completely dry

FramePro W1 is a vapour permeable, airtight wall underlay, which is durable, flexible and lightweight allowing for easy installation. FramePro W1 is water resistant and has a resilient composition, which resists punctures and tears during installation. FramePro W1 can be utilised with Wraptite Tape to provide a simplified and robust method of

AG4 GEL is a formulated blend of solvents and biodegradable detergents designed for removing all types of graffiti from brickwork, concrete, stone and other porous surfaces where a longer dwell time is required for effective removal. The extended dwell time of AG4 allows for effective penetration of the porous surfaces and restricts evaporation of

Delta sealed systems are recommended for below ground waterproofing where soil is retained, for example, basements and vaults. Membrane selection depends on the required finish and flow rate if applicable. All membrane junctions, fixing points, service entries and other protrusions are sealed with the Delta Seal range of sealing products. Where

Nu-Guard AG® Colour is a single-pack, external coating designed to provide protection against fly-posting and graffiti. It is a single-application coating that will prevent graffiti from adhering to the surface and, once dry, the graffiti can be removed quickly and easily using warm soapy water. Can be specified in any RAL colour. Gloss or Semi

The Corden EPS Liquid Gas Barrier is specifically designed for waterproofing vertical and horizontal surfaces. Once applied if forms an effective barrier against carbon dioxide and methane. It is made from a water-based compound that is formulated on a styrene-butadiene co-polymer. The Corden EPS elastomeric liquid vapour membrane is a single

Nu-Cryl® AG Extra (HPC 46) is a clear, hydrophobic impregnation, anti-graffiti coating system. It is designed for use on dense, non-porous substrates such as external walls made of granite, marble, brick, polished concrete and GRC. Due to its excellent stain resistant and water repellent qualities, Nu-Cryl AG enables dirt, pollution, and graffiti to be