Nu-Guard NRG Clear
Clear coatings / sealants
|Methods of application||
5 on average
Touch dry 1-2 hours
|Maintenance cycle (years)||
|Container size (litres)||
5L drum, 25L drum, 1000L IBC
Nu-Guard® NRG Clear (HPC15) is an energy saving protective coating for use on all types of mineral substrates, including stone, brick, reconstructed stone, blockwork and tiles.
The clear coating deeply impregnates into porous building material and chemically bonds within the capillary pores and to the surface of the substrate.
As well as saving money by reducing energy bills, Nu-Guard® NRG Clear protects building substrates from water ingress even in the harshest climates.
The coating is super hydrophobic providing a self-cleaning mechanism which maintains a building’s aesthetics. Dirt particles are picked up by water droplets formed by rainfall and simply washed off the surface. Due to the micro-nanoscopic architecture of the coating's surfaces, adhesion is minimised and therefore microbes are deprived of their medium. Pollutants, fungal spores and algae are also washed off by rainfall.
To protect masonry and reduce heat loss in buildings in exposed locations.
For use on all types of mineral based substrates including:
Depends on texture and porosity of the substrate.
The average coverage rate is 5m²/ litre applied in 1 coat.
Touch dry 1-2 Hours.
Impregnation to be applied by Flood-Coating method using a pump-up or airless spray at low pressure. Application should be to full saturation commencing at the bottom and working up.
One coat by brush, roller or spray.
All equipment should be cleaned with water immediately after use.
Store away from direct sunlight and sources of heat. Protect from frost.
Single component product supplied in: