Structural protection

Newton HydroCoat 905-CM is a water-based curing compound which inhibits the effects of sun and wind on liquid waterproofing membranes and so extends the curing time to ensure full cement hydration and full strength of the product. HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, which

A four-part acrylic injection resin with a controllable reaction time and low viscosity, making it ideal for sealing fine cracks, wet or dry, deep into the substrate. The resin can also be injected into the HydroTank 302 InjectionHose system to provide a maintainable Type B waterproofing solution. PC 509 Z Acryl is a four-part injection resin with

NewSeal 408 DeckDrain is a drainage membrane for decks and flat roofs. It is double cuspated, has drainage studs to the upper and lower surfaces, and incorporates a polypropylene geotextile filter layer, bonded to a water-impermeable HDPE (High-Density Polyethylene) core. The double cuspated design gives drainage two layers: firstly, allowing for

Nu-Flame fire protection systems for timber include clear varnishes, fire-retardant impregnations and coloured finishes for internal and external use

MS Drain serves as a drainage layer with fused-on geotextile. Sheet features a high compressive strength of c. 500kN/m² as well as more than 8,900 dimples/m². Featuring a contact area four times greater than that of conventional dimpled sheets allowing for greater distribution of pressure on the waterproofing. Fused-on hydrophilic geotextile

MemTech’s Pro Titan Tank is a post applied waterproof and ground gas membrane which offers a safe solution for the protection of buildings, structures and occupiers against all levels of Hydrocarbons, VOCs, Methane, Carbon Dioxide and Radon gas ingress. MemTech Pro Titan Tank is a post applied waterproof and hydrocarbon barrier gas membrane. This

EPS Evolution VOC –Gas and Hydrocarbon Barrier is a multi-layer, polyethylene membrane. EPS Evolution VOC is specifically designed and manufactured to perform as a Methane, Carbon Dioxide, Radon, Ground Gas, VOC, air & Moisture, and Hydrocarbon protection system. EPS Evolution VOC complies with the latest codes of practice as published by BRE

Koster PUR Gel is a solvent-free, water activated polyurethane gel. Depending on the amount of water added, a highly elastic, waterproof gel or respectively hydro-gel foam is formed. After it has reacted in dilutions up to 1:10, it is resistant to pressurised water. It does not contain free isocyanides and is chemically stable after reacting. It

Probreathe® A2 is an airtight woven glass fibre membrane with a PU coating. The membrane combines breathability, good water resistance and airtightness in one membrane. It has a Reaction to Fire classification of A2-s1,d0 when installed free-hanging or onto a substrate which is minimum A2-s1,d0

Wraptite® combines the best properties of a vapour-permeable membrane and an air barrier in one innovative, affordable, self-adhering product. It fully bonds (without mechanical attachment) to almost any substrate for air tightness and ease of installation, requiring minimal use of sealants or tapes. The Wraptite® air barrier prevents lateral air

V-GARD™ vapor control membrane is made from fibreglass reinforced aluminium foil with a self-adhesive bituminous backing, designed as a high-strength vapour barrier for roofing systems: high-strength vapour barrier membrane for roofing applications; excellent vapour resistance with Sd value >1,500 m; resistant to foot traffic and mechanical

Cementing Waterproof Strength: HydroCoat 107 Elastic 2K, a cementitious coating, ensures robust waterproofing and protection for concrete and masonry. Its spray application makes it perfect for large-scale projects, ideal for reservoirs, tunnels, water tanks, basements, podium decks, flat roofs, and balconies. Spray-Applied Precision: Tailored for

Nu-Cryl® AG Extra (HPC 46) is a clear, hydrophobic impregnation, anti-graffiti coating system. It is designed for use on dense, non-porous substrates such as external walls made of granite, marble, brick, polished concrete and GRC. Due to its excellent stain resistant and water repellent qualities, Nu-Cryl AG enables dirt, pollution, and graffiti to be

Nu-Guard Anti-Carbonation Coating (HPC 09) is a water-based acrylic coating formulated to give high durability and weather resistance to surfaces. It has excellent adhesion to general masonry, especially concrete surfaces. Nu-Guard AC provides excellent anti-carbonation properties, and will, if applied at the recommended film thickness, provide

The Newton PAC 500 (Positive Air Curtain) System is a combined basement waterproofing and ground gas mitigation system which successfully controls both water and gas levels within below ground / retaining structures. It can be installed to both new and existing projects, domestic and commercial. The patented system combines the Newton System 500

The Koster BD Wet Room Tanking Kit is a ready-to-use, seamless waterproofing set featuring the highly elastic, waterproof acrylic-based material, Koster BD 50 and all its components combined in one package: 2kg of BD50 Primer; 10kg of BD50 Compound; 15 metres of Koster Super Fleece; 1 outlet sleeve. BD 50 Primer A water-dilutable, low viscous

Delta's Type C cavity drainage waterproofing system comprises a cavity drain membrane, drainage system, package pump and control system. It is a maintainable basement waterproofing solution for new-build basements, refurbishment and retrofit projects. Type C waterproofing is defined as “drained protection”, where the structure itself provides

Koster NB1 Grey is a BBA certified mineral waterproofing slurry system containing crystallising and capillary-plugging agents for sealing against pressurised water. It can be used for waterproofing against ground moisture, non-pressurised and pressurised water in new buildings and restoration. It has a watertight (>130 m water head), mineral

Nu-Guard AG® Colour is a single-pack, external coating designed to provide protection against fly-posting and graffiti. It is a single-application coating that will prevent graffiti from adhering to the surface and, once dry, the graffiti can be removed quickly and easily using warm soapy water. Can be specified in any RAL colour. Gloss or Semi

Procheck Adapt is a high-performance, variable-permeability vapour control layer for use in a variety of commercial and residential applications. It is designed to protect the building fabric from potential risks of condensation and will also act as an airtight barrier. Its variable permeability adapts to changes in humidity levels becoming more

Delta Amphibia is a fully-bonded, multi-layer, co-extruded waterproofing system for below-ground construction in residential and commercial applications. This robust, tough and flexible waterproofing membrane is reactive to contact with water, self-repairing, self-sealing and self-fastening to concrete. It can be applied vertically or horizontally

Delta PT is a high-performance polyethylene membrane used to insulate and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant seal. The 8mm stud design of Delta PT provides a continuous air gap

HydroBond 403 Plus is an extremely high-performance composite sheet waterproofing membrane featuring a locking fleece to one side and a polymer hydrophilic coating to the other. When situated under the new raft or against the wall shuttering the poured concrete engages into the locking fleece so that the membrane is completely locked in and

Corden EPS Evolution Bond – Gas and Hydrocarbon Barrier is a multilayer, Polyethylene membrane with a bonded textile for pre-applied applications; specifically designed and manufactured to perform as a Methane, Carbon Dioxide, Radon, Ground Gas, VOC, air & Moisture, and Hydrocarbon protection system. Corden EPS Evolution Bond complies with the