Ladders / steps / work platforms

Alutec from Planet Platforms is a bespoke range of aluminium access systems, platforms, steps and walkways, designed to enable safe working at heights. From working around vehicles, aircraft and trains, to access systems for schools, workshops and factories, Planet Platforms will already have designed a system similar to the one that you need, and

Type BL-COMP companionway ladders are designed for use with Bilco Roof Access Hatches

Planet Platforms offers a besplke range of fibreglass access systems, including Protec access platforms and podiums, and Prosafe access towers. Fibreglass is lightweight, strong, non-conductive, and spark/chemical resistant, making it suitable for offshore, food, rail, or conservation sites. Protec fibreglass systems are specifically engineered to

Platform Ladder is a very fast, lightweight and safe personal mini access platform. It is suitable for any external short duration work at heights of up to 7m (reach). Platform Ladder has a secure gated platform and special detachable ladder, and is both light enough to lift and relocate whilst still assembled. It is also easily transportable

Bespoke step-overs can be designed bespoke to provide safe access over pipework, conduits, plant equipment or to accommodate changes in level. Modular in design, they are constructed from Kee Klamp® and Kee Lite® fittings for a durable and robust access solution. Each unit made specifically to meet on-site requirements, configurations, height and

The Type BL-WG industrial fixed vertical ladder with safety cage and guard rail is available in standard sizes for floor-to-ceiling heights of 2-6m. It is designed for external ladder access or in situations where a ladder is used by personnel to move from one level to another without using an access hatch. Special sizes are available upon

The Roof-Pro range of access solutions is engineered to aid safe passage across and around flat roofs. Each system is designed to BS 5395 and Building Regulations Document K, and then the specific requirements of the roof layout. There is an inherent CDM design responsibility for all teams involved in the design process to make sure a safe access

The Solar Platform is specifically designed to allow safe roof access for solar installation, repair and maintenance. It is suitable for smaller, typically thermal solar jobs and offers a cost-effective alternative to hiring scaffolding for each job. The 2m-long Solar Platform has adjustable telescopic legs and a rolling window bar, strap-operated

Type BL industrial standard fixed vertical ladder available to suit floor to ceiling heights of 2-6m (special sizes available upon request). The ladders are manufactured to meet the requirements of BS4211:2005 and are available in alumnium or galvanised steel. Designed for use with Bilco roof access hatches. Can be supplied with a fixed safety

Made from 100% steel, Ladder Spurs are designed to comply with HSE OC 200/30 by increasing the base width of a ladder and preventing outward slip. They can be attached to any ladder by a simple ratchet strap: width: 75cm + ladder width; size (h x l x d): 850 x 230 x 125mm; max stile size: 12 x 3.5cm; weight: 5kg; reach 50cm

Easi-Dec's Roofline System provides simple and fast access to roofline level. Two or more Easi-Dec platforms can be securely linked with a catwalk to create a continuous, fully-guarded working platform that complies with EN13374 edge protection requirements. The 8 or 10m Roofline System comprises of 2 Easi-Dec platforms and a catwalk and can be

The two-piece Conservatory Roof Access System provides a means of accessing any glazed roof for cleaning and maintenance purposes. The horizontal access is supported across two glazing bars, and incorporates a kneeler with purpose-built tool tray and bucket recess, to enable the worker a ‘hands free operation’. The vertical access section is

Safesite can design static custom platforms to meet site-specific requirements and to provide a safe working platform where off-the-shelf systems are not suitable. Bespoke access platforms provide safe access over pipework, plant equipment, and conduits, to accommodate changes in roof levels or as a safe work platform. Modular in design, bespoke

Roof-Walk is A fully guarded rolling work platform mounted onto twin tracks which allows workers to move freely and safely up and down the roof. The system is ideal for use on fragile roofs, and provides a safe working position for skin maintenance, inspection, cleaning or re-sealing work: full guarded rolling platform mounted onto twin tracks

The LadderUp® safety post extends the available hand holds on a fixed ladder, making it safer to exit or enter a roof hatch, floor door or manhole. A permanently mounted but retractable telescoping vertical post, LadderUp® extends easily in a one handed action to provide an additional hand hold at the egress of the roof or floor opening. This

A stepover unit provides access over ducting, parapet walls, conduits or other roof obstructions. Complying with the Work at Height Regulations and, where applicable, BS5395: Part 3, stepover units give flexible access over a range of widths and heights while keeping the operative safe and enclosed by the handrail at all times. Available in

The Type BL-WH industrial fixed vertical ladder with safety cage is available in standard sizes for floor to ceiling heights of 2-6m. The fixed safety cage is designed to sit below a roof access hatch at heights above 2.2-3m. Bespoke sizes are available for special applications on request. Manufactured in aluminium to meet the requirements of

Safesite’s range of ladder accessores are designed to overcome the dangers associated with working off ladders. The range provides simple and effective protection by securing the ladder properly to prevent it from slipping or moving so that you can work safely and includes: ladders Spurs: Designed to prevent the ladder from slipping sideways by

Bilco's industrial-grade BL-ZBOX retractable ladder features heavy-duty counter-balancing springs to enable safe and controlled operation, and is supplied with timber lining and trapdoor to enclose the ladder from the underside: constructed with corrosion-resistant materials to provide many years of trouble-free, dependable service; die-cast

The Mono-Dec access platform allows single workers to safely get up to height quickly and easily. It provides a safe, stable working area and is ideal for painting, cleaning soffits, or re-pointing brickwork. Mono-Dec can be transported in an estate car and is assembled in just a few minutes. It can then be lifted and moved around a building with

Roof-Walk is a fully-guarded rolling platform that is designed to overcome the challenges of working with fragile roofs. It allows users to adopt a safe working position for skin maintenance, inspection, cleaning or re-sealing work. Available as 4.6m as standard, it can also be made as a 2.5m platform, and runs up and down twin modular 4m linking

Bespoke Access Platforms are available to suit individual needs to allow safe access to difficult to reach areas such as for vehicle maintenance, including buses and trains, or access to machinery. Static and mobile platforms can be built up to 3m high (higher platforms are possible with the addition of extra support arms) and adapted to suit any

Bespoke access platforms and step-overs are built from modular fittings to provide a safe, robust, corrosion-resistant access platform. Easi-Dec can design both static and mobile custom-built platforms and step-overs to meet specific site requirements to provide a safe solution for working at height, for safe access between different levels, or

Planet Platforms has over 40 years' experience designing and manufacturing specialist aluminium and fibreglass access platforms that enable safe working at heights. Specialist access systems use hydraulic vertical adjustment which allows the desired working height to be easily adjusted, and enables many more tasks to be completed and increases