Wall / ceiling access panels

PURA 9000 Series access panels are suitable for tiled walls and are available both fire rated and non fire rated. A performance access panel with optional anti-bacterial paint finish for clean rooms, hospitals and food preparation areas where access to mechanical and electrical services is required behind plasterboard walls or suspended ceilings

Alpro 2000 tiled access panel kits are used to provide a hidden panel in tiled walls for inspection of building services. The panels can accommodate any kind of material, including tiles, marble, granite or a mirror. 150 x 150mm to approximately 600 x 600mm The joint bracket and two hanging devices are inserted into the tile joint while the tile

The Loft Hatch is designed for domestic loft space access, to accommodate standard loft ladders, and to fit between 600mm centre trusses. The drop-down door is an attractive alternative to timber or plastic products. It meets all building regulations for insulated and fire-rated loft hatches, and complies with Documents L1 and L2 2002

The plasterboard door access panel has a beaded frame and can be finished to match the surrounding interior. It gives a flush finish after tape and jointing Features include: 30dB reduction; dual purpose for walls and ceilings; 7 standard stock sizes with bespoke options; sliding pin hinges to easily remove door; threaded steel bung. Sizes range from 200x200

The Airtight loft hatch has been independently tested in a UKAS-accredited test house. The current air permeability test requires a hatch to withstand a pressure of 50 pascals; this hatch passed the test at 600 pascals air pressure. Sleek steel design, protruding 2mm from the ceiling. Powder-coated finish in white RAL 9010

The SPIRA 6000 Series circular access panel is a non fire rated access panel for ceilings. It is a "twist to open and lift out" panel and has a slimline design: fast and simple to install; twist open and close door mechanism; suitable for use in suspended ceiling systems; metal or plasterboard door options; single door (SD) configuration

The ARIA 5000-NFR is a ceiling access panel and hatch designed to provide permanent access through 'lay-in' mineral fibreboard tile grid ceilings to mechanical and electrical services concealed above. The welded metal frame holds a metal door tray designed to accept the same selected ceiling tile as in the surrounding ceiling. The door is hinged

Plastic panels are used to provide for access to concealed building services in ceilings and walls, such as rodding eyes and stopcocks, particularly in domestic applications. The narrow 20mm profile gives lightweight systems that can be used in all types of wall or ceiling construction: manufactured in UV stabilised ABS in white equating to RAL

Profab’s ALTA 3000 Series metal ceiling panel is designed and manufactured to offer ease of access to loft space. Available in fire-rated and non-fire-rated versions, it offers a discreet aesthetic finish, and is quick and easy to install. The loft hatch can be used to provide access to the loft area between 50mm wide timber truss, joisted plasterboard or plaster ceilings

The 1000 series access panels are suitable for walls and ceilings and are non fire rated. They are an entry level, lockable panel for applications where concealed maintenance-free access is required behind walls and ceilings: slimline 35mm deep (MD version only); plasterboard Door PD 55mm deep; standard sizes available next working day; 1.2mm

8000 Series access panels are non fire rated and suitable for tiled walls. They feature a slim frame depth. A fire rated version is available on request. Slim frame depth 76.5mm; Marine Ply (MP) fitted as standard; Glass Reinforced Gypsum (GRG) option; custom manufactured to order; 1.5mm electro-galvanised mild steel; CNC manufactured to ISO

The ECHO 7000 Series s a non-fire-rated, hinged ceiling access panel with a good performance acoustic rating. With its discreet finish, the panel is typically specified for high-end residential and hotel construction projects. This product has a standard acoustic rating of 21dB, and can be upgraded to achieve an acoustic rating of 33dB with a

The VEGA 1500 Series is a non-fire rated riser door, manufactured and tested to meet standards suitable for a wide range of non-fire rated market applications. It is available in single door and double door configurations, with a steel frame and lightweight door. The VEGA 1500 Series will fit seamlessly into masonry walls, shaft walls and drywall

The Premium fire rated panel provides an opening in ceilings and walls to provide access to building engineering services. It is fire rated for up to 2 hours. The fire rating does not affect the appearance of the panel. It does not use heavy layers of plasterboard that might affect performance or make it harder or more dangerous to operate

Value panels provide openings in ceilings and walls for access to building engineering services where space and budget is at a premium. There are two frame options for Contract panels. A beaded-frame type has a perforated flange to key into the surrounding membrane and is used where the surface has yet to be finished. A picture-frame type has a

Fire-rated steel access panels provide one-hour fire protection as tested to BS EN 1634-1:2008 and BS EN 1364-2:1999, including a 1Hr Fire Rating "pass" on the insulation, by virtue of integrity 34dB sound reduction on UKAS test; BS EN 1634-3 Smoke Test approved / complies with Part B Building Regulations; independently tested in a UKAS-approved

The Premium panel provides protected openings in ceilings and walls for access to building engineering services. It features plasterboard that has been factory-fitted into the door face with a formed edge bead surround, which allows a specialist plaster finish effect to be continuing across the ceiling. With each of the lock options, the lock area

1000 series access panels are suitable for celings and walls and have a metal door with up to 2 hour fire rating: trusted certificated fire ratings; slim frame depth 45mm, MD - Metal Door Version; standard sizes available next working day; 1.2mm electro-galvanised mild steel; CNC manufactured to ISO 9001:2008 & 14001:2004; concealed hinges with

The TL-KT Access Panel Kit is a revolutionary new kit for a single tile that solves the problem of access through grouted tiles, without detracting from the finish of the tiled area. It blends seamlessly into the tile surfaces, providing an opening to concealed building and plumbing services. The popularity for expansive tiled areas in modern

The plastic Handi-Access panel range provides a simple, low-cost, high-quality solution for access to building services in walls and ceilings. The injection-moulded, slim profile is light in weight, enabling an easy-fit installation into all types of wall or ceiling. Produced from UV-stable ABS, the white panel will not discolour. However, the

INTEGRA 4000 Series concealed riser doors are custom made to the required specification to be visually discreet and fit seamlessly in masonry walls, shaft walls and drywall partitions: up to 4 hour fire rating (third-party certified by CERTIFIRE); 35dB acoustic rating as standard; smoke sealed; airtight to Part L; powder coated with a matt RAL

Contract panels provide protected openings in ceilings and walls for access to building engineering services where space and budget is at a premium. The panels comprise a pivoting door tray and frame. The narrow 25mm profile produces lightweight, robust panels that can be used in all types of wall or ceiling construction: manufactured from 1.2

The Super Alpro tile kit is a versiatile system that provides large access points for access to building services through ceramic tiled walls. It works by using stainless steel hinges mounted on push-in brackets and door hinges. The design that limits door sag to a minimum, thus avoiding chipped tiles caused by the door dropping as it is opened

Jupiter Blue's AT35 airtight loft hatch is the first product of its kind to achieve airtightness under positive and negative air pressure at 50Pa. It is designed to help housebuilders pass the air permeability tests required on new properties and provides a U value of 0.35 (Part L compliant