Refine by
Channel
Showing Products. Change channel to only show:
Masonry fixings
(17)
Masonry fixings products. Find the best product for your project here.
TVS resilient wall ties
Where it is required to structurally tie an isolated wall into an unisolated structure, there is a potentia bridge in the box-in-box design. TVS resilient wall ties overcome this problem by integrating a high-performance Sylomer element into the wall tie. Available in a whole host of designs, depending upon the construction of the isolated and
FIRMA masonry support systems
FIRMA masonry support systems are designed to allow for typical building tolerances and on-site adjustments. Supplied complete with the appropriate fixing packs and accompanying drawings for simple on-site installation. Design and fabrication of secondary steel products. Galvanised mild steel for the support of masonry brick and blockwork
Stainless steel and mild steel windposts for facades and brick walls
Stainless steel and mild steel windposts for structural facades and brick walls are used to span vertically between floors of a building to provide additional structural strength to a wall where wind loads need to be addressed. L-profile, C-profile, box-profile, parapet and balustrade options available
Timber frame tie are used to fix masonry to timber frame buildings. They are made from 0.5mm thick stainless steel. 250 ties per box complete with stainless steel ring shank nail Complies with strength requirements for a DD 140 type 6 tie To suit a 50mm cavity Tie nails are 50x3.35mm Ties should be installed at a density of 4.4 ties per square- PRODUCT
- Bluebird Fixings
Frame cramps are used to tie timber frames to masonry. All are made from galvanised mild steel BS EN 10327:2004. Three sizes are available: 4", 150mm overall 6", 200mm overall 8", 250mm overall- PRODUCT
- Bluebird Fixings
Expansion joint ties are debonding ties supplied complete with PVC sleeve. 2mm thick by 25mm wide, the ties are available 200 or 300mm long, with other lengths to special order. The ties are manufactured from 304 grade stainless steel (BS EN10088-2- PRODUCT
- Bluebird Fixings
Bluebird produces screw ties designed to be used in conjunction with membrane systems- PRODUCT
- Bluebird Fixings
There are many issues associated with failing wall ties: Horizontal and stepped cracking of the masonry / mortar Possible bulging of the walls The original building specification may have used too few wall ties Detection of the problem requires specialist equipment Timberwise have fully trained and experienced surveyors who have a range of systems- PRODUCT
- Timberwise
Bluebird cavity wall screw ties comply with the strength requirements of DD140-1 for a type 2 tie. They are used to connect new walls to existing buildings at right angles. Quick and easy to use, no special tools or skills required to install them. The ties are made from austenitic stainless steel, and are suitable for 50 or 75mm cavities on- PRODUCT
- Bluebird Fixings
90° bend debonding ties are made from 304 grade stainless steel (BS EN 10088-2), and are supplied with PVC sleeves. They are used in expansion joints. The ties are also available without the sleeve- PRODUCT
- Bluebird Fixings
Bluebird Screwties® provide an easy way of connecting new walls to existing buildings at right angles. They tie in walls without toothing and provide lateral stability for brick, block or stone. The ties can be used for internal or external walls. Galvanised Bluebird Screwties® are available for inner leaves. They are galvanised to BS EN- PRODUCT
- Bluebird Fixings
- Ancon Windposts span vertically between floors to provide additional lateral support for large panels of brickwork or panels with openings. The range consists of WP2 windposts that can be installed into the inner leaf of blockwork, WP1 and WP3 windposts for installation within the cavity that leave the blockwork undisturbed and WP4 windposts for
- PRODUCT
- Ancon
- Ancon AMR is steel reinforcement that locates in a bed joint to strengthen masonry panels. The longitudinal wires are flattened to less than 3mm to ensure good mortar cover is maintained, even when the product is lapped or used in the same joint as a wall tie. AMR improves the structural performance of a wall by providing additional resistance to
- TecTies manufactures a comprehensive range of reinforcement systems to strengthen brickwork and blockwork. Products are available for structural load applications as well as non-load-bearing applications
- PRODUCT
- TecTies
- The Industrys growing emphasis on speed of construction has led to the development of a masonry support system consisting entirely of standard components. Ancon has designed the standard AnconOptima system to be more adjustable and considerably faster to install than traditional bespoke systems with welded brackets. AnconOptima comprises short
