Structural fixings & support

Where it is required to structurally tie an isolated wall into an unisolated structure, there is a potentia bridge in the box-in-box design. TVS resilient wall ties overcome this problem by integrating a high-performance Sylomer element into the wall tie. Available in a whole host of designs, depending upon the construction of the isolated and

Wirand steel fibres are used to reinforce industrial concrete flooring. Steel Fibre Reinforced Concrete (SFRC) has been enhancing concrete performance for over a century. By incorporating steel fibres into the concrete mix, both mechanical and physical properties are significantly improved, creating stronger, more durable, and more reliable

Delta PT Ultra Fix plugs are made from high-impact polymers for fixing Delta PT membranes, AT 800 and 3mm membranes to walls. Designed for watertight, self-sealing installation, they can accept a 5mm screw for pipe clips or cable tracks and act as an alternative to Delta Plugs and Qwik Seal Plugs

Timbercut Landscape Screws Box of 50 are made from galvanised EN 10083 2 steel with a 1000-hour green organic coating for exterior use, designed for fixing timber in landscaping, decking, fencing, and similar applications. Each box contains 50 screws sized 7.0 x 200mm, with a hex washer head and magnetic driver included: box of 50 galvanised steel

TVS VT Acoustic Hangers offer cost effective solutions for isolation of suspended equipment and ceilings. Designed to solve both low and high frequency attenuation problems in a protective space or radiating to surrounding locations. Ideal for suspended ceilings, piping, ductwork, air handling units and HVAC equipment: static deflections up to

TVS SH Acoustic Hangers are made from steel with Sylomer® material for isolating suspended ceilings and equipment. Designed to reduce both low and high-frequency noise transmission. Suitable for use with threaded rod suspension systems. Each hanger supports up to 75kg and is shipped fully assembled for quick installation: acoustic hanger for

FIRMA masonry support systems are designed to allow for typical building tolerances and on-site adjustments. Supplied complete with the appropriate fixing packs and accompanying drawings for simple on-site installation. Design and fabrication of secondary steel products. Galvanised mild steel for the support of masonry brick and blockwork

Stainless steel and mild steel windposts for structural facades and brick walls are used to span vertically between floors of a building to provide additional structural strength to a wall where wind loads need to be addressed. L-profile, C-profile, box-profile, parapet and balustrade options available

Habegger manual wire rope winches are available in four versions. Habegger HIT-06 is the smallest and lightest unit available for pulling, lifting and lowering. Features: light alloy housing; anchorage bolts secured; overload protection by shear pin; exchangeable shear pins in jaw opening lever; case available. Technical data: rated force (pulling, lifting, lowering): 600kg

Jakob Stainless Steel Wire Rope Assemblies are made from high grade 316 stainless steel and designed for architectural, structural, and safety applications. Size range spans 1mm to 26mm, with multiple construction types and a broad selection of fittings for varied installation needs: stainless steel wire rope assemblies for architectural and

A range of powered winches is available includes a super light power-driven rope pulling machine for lifting, pulling and lowering with unlimited rope strength. Technical data: rated force (pulling, lifting, lowering) - 800kg; overload protection by sliding clutch - at approx 20% overload; rope speed - approx 10m/min; rope length - unlimited; weight including

ArmaFix NH Smart is a halogen free pipe support to prevent condensation and thermal bridging at fixing points in refrigeration and air-conditioning systems. It features PET-foam bearing segments, attached to NH/ArmaFlex Smart elastomeric foam. The outside shell is made from 0.8mm aluminium sheeting which serves as a vapour barrier: load-bearing

ArmaFix Ultima is a one-piece pipe support system designed to prevent condensation in refrigeration and air conditioning installations. It has two ArmaFORM PET foam sections and a self-adhesive closure to fit with ArmaFlex Ultima: pipe support system designed to reduce condensation at fixing points; for cooling systems, including refrigeration and

ArmaFix Ecolight is a lightweight, insulated pipe support designed to thermally isolate pipework from brackets, eliminating thermal bridging and preventing condensation at support points. Made with 100% recycled PET foam core and elastomeric ArmaFlex insulation with a PVC outer foil for compatibility with adjoining insulation. Suited to HVAC and

ArmaFix AF is a pipe and duct support system made of PET-foam core embedded in elastomeric insulation to prevent thermal bridging and condensation at fixing points. Designed for refrigeration and air-conditioning installations, it integrates with AF/ArmaFlex or AF/ArmaFlex Evo for seamless insulation. Load-bearing PET foam bonded withAF/ArmaFlex