Structural elements

The CS range of gasketed expansion joint covers is suitable for a wide range of applications, including shopping centres, hospitals and schools. Available in different sizes, they can be surface- or recess-mounted, and have a minimal exposed surface, along with a sealable gasket for infection control. Can be used in conjunction with carpets

Leander cast metal columns are used to create architectural structures such as canopies, verandas, walkways, arcades and balconies. Columns typically hybrid aluminium castings with supporting steel tube, or fully cast aluminium. There is a wide range of columns to choose from to build canopies, verandahs and other architectural structures that are

Cathedral walling by CED Stone is made from sandstone with naturally riven tops and sides, tumbled for softened edges and an aged appearance. Designed for traditional or rustic garden styles, this walling is suitable for building garden walls, stone seating or raised beds. Available in two colours and a range of sizes

FP McCann produce hollowcore flooring units made from prestressed precast concrete. These concrete floor slabs are typically 1200mm wide, with depths from 100mm to 500mm. Prestressed concrete enhances structural performance. Suited to masonry, steel precast, and in-situ construction

Allway® expansion joint covers are made to bridge structural gaps in buildings, allowing for safe movement caused by thermal changes, settlement, wind sway or seismic activity. The range includes floor, wall, ceiling, parking and exterior joint covers, with options for fire, moisture and acoustic barriers. Covers suit a variety of building types

Ground beams are precast concrete structural components designed to span between foundation bases. They can be used to support brick or blockwork and act as a permanent shutter at the edge of an in-situ concrete floor slab. Ground beams can be designed to meet specific project requirements or supplied in standard dimensions. Quick off-loading and

Ketley Special Shaped Bricks are made from Staffordshire clay and designed for use in exposed or vulnerable areas of brickwork. Shapes include bonding bricks, copings, cappings, bullnose, angle, cant, plinth, arch, radial, cill, soldier, non-standard cuboid, Brixel, planter, Swift, and Bee bricks. Bespoke shapes can be made from supplied drawings

Celcon High Strength Grade blocks are made from aircrete and designed for use where higher compressive strength is needed, such as in multi-storey buildings and foundations. Key features include a compressive strength of 7.3N/mm², thermal conductivity of 0.18 W/mK, and density of 730kg/m³. Available in widths from 100 to 355mm

Zip Block (ZB) is a one-piece, extruded EPDM elastomeric seal with integral nosings, which is bonded to the substrate with high strength epoxy adhesive. This watertight floor joint cover system system can be installed over green concrete and is also suitable for retro-fit applications. Much stronger than traditional elastomeric concrete systems

Leander column finials are designed to fit over standard tube sizes such as 60, 76 or 89mm.All are illustrated in the Architectural Castings pdf which you can download from this page: cast aluminium column finials; spike, dome and star designs; wide range of patterns and styles to choose from; designed for standard tube sizes - 60, 76 or 89mm

Paddlestone walling from CED Stone is made from flat, disc-shaped quartzite pieces with rounded edges, created by tumbling surplus paving products. Designed for building dry stone walls, edging and water features, this sustainable range mimics the look of natural river-worn stones without impacting river or beach environments: flat, rounded

Celcon Foundation Blocks can be used to support 3-storey buildings and are suitable for supporting solid or cavity walls, framed constructions or suspended floors, including the H+H Beam and Block system. Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). The blocks can reduce heat loss from ground floors

Ketley Biodiversity Bricks are clay bricks and tiles designed to support wildlife in built environments, including planter bricks, moss tiles, swift boxes and bee bricks. Made from extruded clay, they help meet biodiversity net gain targets and can be used in a range of wall and landscaping applications

ACO Nest Box can be built into new or existing walls to provide a sheltered nesting refuge for small birds. The box is three standard brick courses high and half a brick course in width, so is easy to build in to a wall during construction. Alternatively the box can be retrofitted by cutting out a suitable area, or it can be fixed to the face of

Staffordshire Brown Brindle is a Class A engineering and facing brick manufactured in the UK from Etruria Clay. The bricks are unique to Ketley and provide an alternative to Staffordshire Blue for use as a feature brick. They are available as either solid or perforated types: large commercial projects; canal-side works; bridge parapets. excellent

Celcon Solar Grade blocks for walls are principally used where enhanced thermal performance is required. They are identified by the distinctive painted blue line. With a superior thermal conductivity Solar Grade blocks are suitably load-bearing for 2-storey buildings and can be used below DPC. Thicknesses from 100 to 215mm

Ketley's Staffordshire Red bricks are manufactured in the UK to engineering Class A specifications. They are available as either solid or perforated types: commerical developments; landscaping; structural projects (eg. bridges, factory walls). excellent acid resistance; high strength and durability; strong aesthetic appeal. Staffordshire Red

H+H’s Celcon Blocks High Strength Grade are ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings: available in thicknesses from 100mm to 355mm; high Strength (7.3N/mm2 – identified with a black stripe on the

Heavy-duty aluminium recess-mounted floor joint covers utilising a free-floating centre plate held in position by cover plates, offering horizontal movement range up to 100% of the joint width. These covers can be used in areas with some vehicular access and are suitable for interior and exterior applications. For areas where trolley traffic is

Ketley's planter bricks are the first clay planters to be made as an engineering brick. They have been developed specifically in response to the need to demonstrate a Net Biodiversity Gain with new planning applications and greater biodiversity and planting in urban areas where space and options are often restricted. At 215mm wide, the planter

Standard GFT floor expansion joint covers are suitable for interior floor joints up to 50mm wide. Available in four frame depths to suit project requirements. Covers can be fitted flush to the floor screed or left proud to butt up to a carpet or vinyl finish. Floor frames: natural, clear anodised finish. Support / wall frames: mill finished as standard

Staffordshire brown brindle extruded brick slips are thin clay brick facings made from Etruria Marl clay, designed for lightweight cladding and prefabricated panels. Manufactured in smooth, sanded, and textured finishes, they match Ketley class A brown brindle bricks in colour and durability, and use only 30% of the embodied carbon of traditional

Imperial coping stones from CED Stone are flat natural stone units designed to top stone walls, helping prevent rainwater from reaching or penetrating wall structures while creating a smart, level finish. Made from strong, durable materials, these copings are available in Blue Grey Granite, Yellow Granite, Black Basalt and Silver Grey Granite

CS offers a range of simple-to-install expansion joint cover strips and plugs to suit a variety of floor and ceiling applications. They are an easy, efficient solution to covering an expansion joint. Wall plugging sections are made from extruded synthetic rubber and are suitable for interior and exterior applications. Rigid strips provide an