Nu-Guard® AG Clear is an anti-graffiti coating system for protecting exterior substrates against graffiti and fly-posting. The clear single-pack urethane-based coating cures to a hard finish. Graffiti is washed away using warm soapy water and will not leave any ghosting.

  • Single pack external anti-graffiti coating
  • Effective protection against fly-posting and graffiti
  • Clear semi-matt or gloss finishes
  • One-coat application curing to a hard finish
  • Graffiti removed using warm soapy water with zero ghosting
  • No re-application required

Applications

  • Aluminium siding
  • Fibreglass
  • Glass
  • Masonry (includes brick, marble, stone, tile, granite and concrete)
  • Metal
  • Street signs
  • Stucco
  • Utility boxes
  • Vinyl siding
  • Wood

Properties

  • UV-resistant
  • Weatherproof
  • Chemical-resistant
  • Provides up to 12 years of protection

Appearance

Gloss or semi-matt fiinishes available:

  • Nu-Guard® AG Clear Gloss
  • Nu-Guard® AG Clear Semi-Matt

Preparation

Ensure surfaces to be treated are clean, free from contamination, and dry. To prevent concrete surfaces darkening and application to very porous surfaces, it is advisable to apply one coat of Nu-Guard WB Concrete Sealer. Glazed tiles and other dense surfaces should be first primed with Nu-Guard AG Adhesion Promoter.

Application

Apply Nu-Guard AG by brush, roller or spray at a rate of 8-10m² per litre. In most instances one coat should be sufficient, however there may be instances where a second coat is required. Do not apply at temperatures below 5ºC or when the relative humidity exceeds 85%.

Coverage

1 coat @ 8-10m²/litre

Pack size

Supplied in 2.5 or 5 litre containers