Protech VOC Flex is a high performance 6 layer flexible proprietary reinforced VOC barrier and is suitable for use on brownfield sites that require protection from dangerous contaminants such as hydrocarbons.
It has been developed to ease installation on site due to the flexibility of the membrane. It is also suitable as a high performance damp proof membrane.
Protech VOC Flex should be unrolled over the prepared ground or sub-floor which should be swept and free from any sharp protrusions.
Protech VOC Flex should be welded to provide protection against VOCs as per CIRIA C716 : 2012 Remediating and mitigating risks from VOC vapours from land affected by contamination. Advice is available on site specific jointing techniques where applicable.
In areas where the membrane crosses cavity walls or internal single skin walls, Protech VOC Flex Starter Band should be used in conjunctions with Protech VOC Flex Internal and External preformed corner units. Pipe penetrations should be sealed with Protech VOC Top Hats or Protech VOC Flashing Strips. Stanchions and columns should be sealed with Protech Primer and Protech VOC Flashing strips.
Protech VOC Flex Starter Band
Protech VOC Tophats
Protech VOC Flashing Strip
Protech VOC Corner Units
Protech VOC Primer
Protech VOC 3mm
Protech VOC Protection Fleece