Waterproofing membranes

Delta PT 3mm is a high-density polyethylene (HDPE) low-profile studded membrane designed for damp and contaminated walls, or where fast reinstatement of wall finishes is required after chemical damp-proof injection: suitable for damp-proofing; provides key for plaster, renders or dab fix; controls damp, salts and isolates other wall contaminants

Cementing Waterproof Strength: HydroCoat 107 Elastic 2K, a cementitious coating, ensures robust waterproofing and protection for concrete and masonry. Its spray application makes it perfect for large-scale projects, ideal for reservoirs, tunnels, water tanks, basements, podium decks, flat roofs, and balconies. Spray-Applied Precision: Tailored for

Newton HydroCoat 905-CM is a water-based curing compound which inhibits the effects of sun and wind on liquid waterproofing membranes and so extends the curing time to ensure full cement hydration and full strength of the product. HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, which

HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable HDPE (High-Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides outstanding drainage and protection to the outside face of basement walls, preventing the build-up of water pressure and

Delta DualProof is a pre-applied, fully-bonded Type A waterproofing membrane made from a soft PVC layer co-extruded with a non-woven PP fleece. Designed for below-ground reinforced concrete structures, it forms a permanent mechanical bond with concrete to prevent water tracking and is suitable for both horizontal and vertical applications

Delta provides high-performance external drainage protection systems for external basement walls or to protect underlying waterproofing from backfill damage: geo-Drain Quattro - drainage and protection membrane; floraxx Top - external drainage membrane for green roofs; terraxx - protection and drainage system for horizontal application; NP Drain

HydroBond 403 Plus is an extremely high-performance composite sheet waterproofing membrane featuring a locking fleece to one side and a polymer hydrophilic coating to the other. When situated under the new raft or against the wall shuttering the poured concrete engages into the locking fleece so that the membrane is completely locked in and

Koster 21 is a 2-component, solvent-free, liquid applied, elastic, crack bridging waterproofing material that provides excellent adhesion to dry and moist substrates: liquid-applied - it is seamless, easing application to complicated architectural details; UV stable - suitable for indoor and outdoor use; its white color reflects sunlight and

Delta PT is a high-performance polyethylene membrane used to insulate and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant seal. The 8mm stud design of Delta PT provides a continuous air gap

Delta Amphibia is a BBA-approved, fully bonded 1.3mm pre- and post-applied waterproofing membrane for below-ground and earth-retained structures. Made from a co-extruded, multi-layer system with a hydroreactive, self-sealing core, it is suitable for vertical and horizontal applications in new construction

MemTech Pro Titan Bond is a pre-applied waterproofing membrane comprising Memtech Pro Titan and a specialist bonded geotextile to provide a bonding layer for poured concrete specifically for waterproofing applications – Providing Type A Barrier Protection in accordance with BS 8102:2022. MemTech Pro Titan Bond hydrocarbon and VOC barrier offers a

HydroBond 914-RT is a non-woven polypropylene reinforcement tape used with HydroBond 108-LM and HydroBond 109-LM liquid applied membranes and coatings to reinforce detailing around protrusions such as service pipes and over static construction and day joints and covered movement joints. Used with HydroBond 108-LM and HydroBond 109-LM for the

Koster Deuxan® 2C is a BBA approved primary waterproofer for external tanking. It is a robust, crack-bridging, 2-component, polymer-modified bitumen thick film sealant for waterproofing construction. Designed for the secure and permanent exterior waterproofing of basement walls, foundations, floorplates and for intermediate

Koster KSK SY 15 consists of a highly tear resistant, 2-layer cross- laminated, polyethylene foil with a plastic bitumen / rubber adhesive- and sealing-compound. It is cold applied and therefore no hot air or propane gas welding is required for application. Due to its high ductility, it can also be easily applied to difficult details. The sealing

NP Drain two-ply composite sheet drainage membranes are made from high density polyethylene. They have a high compressive strength and offer drainage and waterproofing for vertical and horiztonal appilications. NP Drain memebranes are comprised of a dimpled sheet that prevents water logging and a geotextile layer that filters out fine soil

FlexProof 106 Primer is a polyurethane-based primer suitable for construction joint waterproofing, that improves the adhesion of FlexProof 106 NV to porous substrates, and should always be used when concrete has been ground: increases the adhesion of FlexProof 106 NV to most substrates; seals porous and dusting concrete. priming of substrates

A reinforcement tape for covering cracks, joints, and changes in direction alongside Newton’s liquid-applied waterproofing membranes and coatings: reinforcement of changes in direction for tanking and deck waterproofing; formation of covered membrane joints; reinforcing liquid membranes over static construction joints. A spun-bond polypropylene

DampSafe 603 Tile D-Mat is a composite decoupling mat with an installation height of just 3mm. The blue LDPE (low-density polyethylene) dimpled core has a polypropylene fleece heat-welded to both the upper and lower surfaces, which quickly absorbs adhesives to provide an exceptional bond to both the substrate below and the tiled floor finish

Unique drainage protection system/external waterproofing membrane that works with Type A External Waterproofing or can be used in civil engineering situations. Compact 4-layer membrane. For vertical and/or horizontal use

Newtonite 801 Mastic is a non-toxic, solvent-free, multipurpose silicone sealant primarily used with the Newlath 805 Mesh Membrane and Newtonite 803 Membranes - applied to the plug before fixing into the membrane, Newtonite 801 Mastic seals the penetration and prevents bridging between the damp substrate and new internal surface. Applied to the

Koster PUR Gel is a solvent-free, water activated polyurethane gel. Depending on the amount of water added, a highly elastic, waterproof gel or respectively hydro-gel foam is formed. After it has reacted in dilutions up to 1:10, it is resistant to pressurised water. It does not contain free isocyanides and is chemically stable after reacting. It

The Corden EPS GRM waterproofing and gas resistant membrane is self-adhesive. It provides a continuous waterproofing/tanking system for basements and substructures provided it is used in conjunction with Corden EPS Prime to ensure a suitable bond. The Corden EPS GRM waterproofing and gas resistant membrane is made from a polymer modified bitumen