Floor paints, coatings and sealants

Epoxy Gloss Coat decorative industrial floor coating is suitable for heavily trafficked factories, workshops, warehouses and showrooms. It can be used in food preparation areas. It can be applied over existing coatings and is approved for use on sand and cement screeds, or concrete with under floor heating systems (up to 30°C surface temperature

Flexicoat is suitable for floors which can move slightly due to vibrating machinery, or expand due to heat and moisture. For use on concrete or at least 6 month old asphalt. Features: two-pack polyurethane for heavy wear areas; fills and bridges small cracks to cut preparation time; flexible coating resists movement caused by vibrating machinery

Safety Coat anti-slip epoxy resin floor paint is composed of a tough epoxy resin embedded with fine, traction-enhancing particles. It can be used on any potentially slippery concrete floor, in heavy wear areas. In addition, Safety Coat anti-slip epoxy resin is approved for use on sand and cement screed or concrete with under floor heating systems

Fast drying mid-gloss concrete floor paint is suitable for general purpose use in factories, showrooms, offices, schools and workshops where the easy removal of dust, dirt, oil and grease is important. It has a tile-like finish that is hard-wearing and oil-resistant. If the substrate is new or bare concrete, a primer such as Watco Cemtech should

Epoxicote is a high build, solvent free epoxy resin coating offering excellent chemical and abrasion resistance: gloss finish; high build application gives excellent wear resistance; protects the concrete from oil and chemical contamination; ideal for any area where appearance and wear resistance is important; can be applied onto clean, well

Cold Set Coating is manufactured from polyaspartic resin technology giving a high quality, highly wear-resistant coating that can be applied at low temperatures. It is suitable for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry. Cold Set Coating can also be used for walk-in

Safety Coat is a fine particle, anti-slip epoxy resin floor coating ideal for use over all potentially slippery, concrete floors in heavy wear areas: contains fine, traction-enhancing particles embedded in a tough epoxy resin coating; easily applied by roller; extremely durable and chemical-resistant; non-flammable, solvent-free and virtually

Safety Coat Hygienic is an anti-bacterial and anti-slip floor coating designed for use in food industries, hospitals, locker rooms and food storage areas. It is solvent free and virtually odourless. It attacks a range of micro-organisms, including MRSA, and killed over 99.9% of E Coli and MRSA over 24 hours in lab tests. Safety Coat Hygienic

Watco Chemi-Coat® Acid Strength is a solvent free, one coat epoxy resin floor coating. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer Resists up to 98% strength sulphuric acid Thick coating is ideal for chemical bund areas Smooth, glossy, wipe clean surface Heavy duty high build formula Approved for use on sand and

High Build Epoxy Advanced has an impressive 300 microns in one application, meaning only one coat is required. It dries to the smartest, glossiest finish that will stay like new because it is so easy to clean. It is incredibly hard wearing, which means concrete floors won’t need repainting nearly as often. High Build Epoxy Advanced includes a

Chemi-Coat® Rapid is a tough, two-part epoxy resin floor coating that cures rapidly to provide a 250-300micron thick glossy coating. It is resistant to spillages of a wide range of chemicals. It is suitable for heavy use areas and approved for use on concrete floors with underfloor heating systems (up to 30°C surface temperature). The formula is

The durability of this two pack epoxy resin coating makes it ideal for heavily trafficked areas. It will brighten drab areas of concrete and asphalt and a hard aluminium oxude provides slip resistance. Uses: car parks, driveways, pedestrian walkways, cycle lanes etc. (For internal use please see Watco Anti Slip Traffic Paint) extremely durable for

Watco Epoxy Matt Coat is a durable and chemical resistant coating to protect and brighten concrete whilst making it much easier to clean. Uses: heavy traffic areas including forklift trucks, production and storage areas. Benefits: water based epoxy resin for easy application and long pot life; excellent resistance to oils, solvents and harsh

Epoxicote Rapid is a rapid curing version of Watco Epoxicote which is ready for light traffic in 4-6 hours, minimising disruption. Although a single coat will generally suffice, two coats can be applied in one day if needed. Benefits: gloss finish; high build application gives excellent wear resistance; protects the concrete from oil and chemical

Matt Concrete Floor Paint is ideal for imperfect floors, as it helps to hide the variations in the concrete surface, which would be emphasised by a gloss coating. It is just as easy to clean and maintain as the standard (glossy) Watco Concrete Floor Paint and can mask slight dirt or stains. Main uses: light to medium duty areas such as factories

Watco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and teint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10ºC

Fluorescent, solvent-free high visibility paint is designed for highlighting low beams, trip hazards and snag points that could potentially cause injuries. It can also be used for line marking on walkways or playgrounds. It has a thick consistency that allows it to be easily applied to both horizontal and vertical surfaces. It can be used on