Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Plaster & render
(103)
Plaster and render for internal walls, ceilings and external façades. Gypsum and lime plasters, base and skim coats, one-coat and spray-applied options. Cement, monocouche, silicone and acrylic renders. External wall insulation systems, primers, mesh, beads, dash receivers and accessories. Surface levelling, weather protection and finish for new build and refurbishment.
Plaster & render - helping you find the best solution for your project.

Renderplas MJ4 - 4mm PVCu movement joint bead
Renderplas MJ4 is a 4mm movement joint bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed for areas of render over 20 square metres and should be specified every 4-6 metres, over structural movement joints and changes of background giving a discreet attractive finish. Also for use as an
Renderplas CB10 - 10mm PVCu corner bead
Renderplas CB10 is a 10mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all standard rendering and internal plastering applications, external wall insulation systems, timber frame. Provides a straight edge to external corners and reveals 12 colours available: White, Brick
Renderplas MJ15 - 15mm PVCu movement joint bead
Renderplas MJ15 is a 15mm movement joint bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed for areas of render over 20 square metres and should be specified every 4-6 metres, over structural movement joints and changes of background giving a discreet attractive finish. Also for use as an
Renderplas B20 - 20mm PVCu bellcast bead
The Renderplas B20 is a 20mm bellcast bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed for external wall insulation and timber frame with standard renders (between 15-22mm) as well as other weather board systems where the substrate is very even to provide a drip for rain water at the
Renderplas PS4 - 4mm PVCu small wing stop bead
Renderplas PS4 is a 4mm PVCu small wing stop bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering
Renderplas RS10 - 10mm PVCu render stop bead
Renderplas RS10 is a 10mm render stop bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering
Renderplas RS20 - 20mm PVCu render stop bead
Renderplas RS20 is a 20mm render stop bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering
PVCu movement joint beads for thin coat / acrylic render
Renderplas PVCu movement joints / expansion joint beads are made from recycled, UV-stable plastic for use in external and internal rendering and plastering to prevent cracking from thermal movement. Supplied in 4, 6, 10, 15 and 20mm profiles and a range of colours
Renderplas RS4 - 4mm PVCu render stop bead
Renderplas RS4 is a 4mm PVCu render stop bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering
Renderplas BC10 - 10mm PVCu bellcast bead
The Renderplas BC10 is a 10mm bellcast bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed for external wall insulation and timber frame with thinner renders (between 4-10mm) as well as other weather board systems where the substrate is very even to provide a drip for rain water at the
Renderplas MJ10 - 10mm PVC-U movement joint bead
Renderplas MJ10 is a 10mm movement joint bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVC-U. It is designed for areas of render over 20 square metres and should be specified every 4-6 metres, over structural movement joints and changes of background giving a discreet attractive finish. Also for
PVCu corner beads for standard render
Renderplas PVCu corner beads are designed for external and internal rendering and plastering, made from recycled, impact-resistant, UV-stable PVCu, and meet British and European standards. Variations include 4, 6, 8, 10, 15 and 20mm sizes, with a range of colours for specific dimensions
Renderplas CB6 - 6mm PVCu corner bead
Renderplas CB6 is a 6mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all standard rendering and internal plastering applications, external wall insulation systems, timber frame. Provides a straight edge to external corners and reveals 12 colours available: White, Brick
Renderplas CB20 - 20mm PVCu corner bead
Renderplas CB20 is a 20mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all thick coat rendering and internal plastering applications and external wall insulation. Colours available: White & Ivory Any discoloration is uniform over a single facade and within industry
PVCu corner / angle beads for rendering and plastering
Renderplas PVCu corner beads are designed for external and internal rendering and plastering, made from recycled, impact-resistant, UV-stable PVCu, and meet BS EN 13658-2:2005 and BBA certification. Variations include 4, 6, 8, 10, 15 and 20mm sizes, in a range of colours
Renderplas CB15 - 15mm PVCu corner bead
Renderplas CB15 is a 15mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all standard rendering applications, external wall insulation systems, timber frame. Provides a straight edge to external corners and reveals. 12 colours available: White, Brick, Dove, Ivory, Maize
PVCu movement joints / expansion joint beads for rendering and plastering
Renderplas PVCu movement joints / expansion joint beads are made from recycled, UV-stable plastic for use in external and internal rendering and plastering to prevent cracking from thermal movement. Supplied in 4, 6, 10, 15 and 20mm profiles, in a range of colours
PVCu bellcast / drip beads for external rendering
Renderplas bellcast beads, also known as drip beads, are made from recycled exterior-grade, impact-resistant, UV-stable PVCu for use in external rendering to create a straight edge above damp-proof courses and reveals, protect against impact, and deflecting rainwater. Variations include 10, 15 and 20mm sizes and a range of colours
Renderplas CB4 - 4mm PVCu corner bead
Renderplas CB4 is a 4mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all standard rendering and internal plastering applications, external wall insulation systems, timber frame. Provides a straight edge to external corners and reveals Colour available: White Any
Renderplas MJ6 - 6mm PVCu movement joint bead
Renderplas MJ6 is a 6mm movement joint bead manufactured from exterior grade impact resistant UV stable unplasticised PVCu. It is designed for areas of render over 20 square metres and should be specified every 4-6 metres, over structural movement joints and changes of background giving a discreet attractive finish. Also for use as an internal
Renderplas RS15 - 15mm PVCu render stop bead
Renderplas RS15 is a 15mm render stop bead to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering applications. Provides a
Renderplas RS6 - 6mm PVCu render stop bead
Renderplas RS6 is a 6mm PVCu render stop bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide a stop to the render at window and door frames and at changes to the facade to produce a straight finish and protection against impact. Can also be used for internal plastering
Renderplas CB8 - 8mm PVCu corner bead
Renderplas CB8 is an 8mm corner bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Suitable for all standard rendering and internal plastering applications, external wall insulation systems, timber frame. Provides a straight edge to external corners and reveals. Available colours: White ex-stock
Renderplas MJ20 - 20mm PVCu movement joint bead
Renderplas MJ20 is a 20mm PVCu movement joint manufactured from exterior-grade impact-resistant, UV-stable, unplasticised PVCu. Designed for areas of render over 20m2, it should be specified every 4-6m, over structural movement joints and changes of background, giving a discreet, attractive finish. Also for use as an internal corner with

Sign up to receive the free BUILDING DESIGN bulletin
By signing up, you agree to our Terms and Conditions and Privacy Policy.
We won't share your email address with anyone without your consent. Bulletins are sent on a weekly basis. You can unsubscribe anytime.