Renderplas MJ6 is a 6mm movement joint bead manufactured from exterior grade impact resistant UV stable unplasticised PVCu. It is designed for areas of render over 20 square metres and should be specified every 4-6 metres, over structural movement joints and changes of background giving a discreet attractive finish. Also for use as an internal corner with plasterboard

Colour and appearance

Colour available: White & Ivory

UV stable PVCu; guaranteed not to stain or corrode like galvanized steel beads

Performance

  • Complies with BS EN 13914-1&2:2005
  • BBA certified
  • Class 1Y fire rated
  • More cost effective than stainless steel
  • Not affected by weather - ideal for all habitable climates; eliminates cold bridging
  • Reduced spalling and impact damage
  • Designed to outlast its' metal counterparts
  • Guaranteed to be fit for purpose for lifetime of the render and at least 25 years
  • Cleaned in same way as render

Installation

Supplied in 2.5m lengths and in packs of 25 or 6.

Fixing with a continuous line of adhesive mortar is preferred on blockwork, or alternatively a bed of render.

Non-corrosive mechanical fixings can be used as well but are not required. With external wall insulation, non-corrosive fixings alone are sufficient.

PVCu beading is fast and easy to cut to length with tin snips or a fine toothed hacksaw and is safer to handle than cut metal.

Environment

  • Locally manufactured
  • 89.3% recycled content
  • Low Ecopoint score of 0.004/kg installed
  • Fully recyclable
  • Ecologically benign; non-hazardous in water; non-hazardous if ingested; does not release substances into the atmosphere