Damp / water protection

Newton HydroCoat 905-CM is a water-based curing compound which inhibits the effects of sun and wind on liquid waterproofing membranes and so extends the curing time to ensure full cement hydration and full strength of the product. HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, which

Combination waterproofing systems can offer optimal structural protection against water ingress. BS8102:2009 offers guidance on 3 types of Below Ground Level Waterproofing Systems used in the United Kingdom. These are categorised as Types: A, B & C. Type A Type A is defined as ‘barrier protection’. A material is used to offer a barrier to the

MemTech’s Pro Titan Tank is a post applied waterproof and ground gas membrane which offers a safe solution for the protection of buildings, structures and occupiers against all levels of Hydrocarbons, VOCs, Methane, Carbon Dioxide and Radon gas ingress. MemTech Pro Titan Tank is a post applied waterproof and hydrocarbon barrier gas membrane. This

Proctorwrap Reflect® is a vapour-permeable, low-emissivity membrane specifically designed to enhance the thermal performance of timber and steel frame structures. This non-woven polypropylene foil laminate provides excellent breathability, as well as secondary protection to the building during construction. It is installed on the external face of

Delta FM is a damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve damp pressure equalisation. Various floor finishes can be achieved with zero ‘down time’ with this fast-track application. Delta FM

Probreathe® A2 is an airtight woven glass fibre membrane with a PU coating. The membrane combines breathability, good water resistance and airtightness in one membrane. It has a Reaction to Fire classification of A2-s1,d0 when installed free-hanging or onto a substrate which is minimum A2-s1,d0

Delta PT is a high-performance polyethylene membrane that has been specially designed with damp control in mind. It is used to insulates and isolate damp and contaminated walls, vaults, and basements. Delta PT is manufactured with 8mm extruded studs that create a continuous air gap. This results in a watertight, temperature and chemical-resistant

The Delta Amphibia 1.3mm pre-applied membrane is a co-extruded multi-layer waterproofing membrane. It is a robust, tough but flexible waterproofing membrane suitable for all construction applications. Delta Amphibia 1.3mm is an EPDM waterproof membrane is available in two widths, reactive to contact with water, self-repairing, self-sealing and

NewSeal 408 DeckDrain is a drainage membrane for decks and flat roofs. It is double cuspated, has drainage studs to the upper and lower surfaces, and incorporates a polypropylene geotextile filter layer, bonded to a water-impermeable HDPE (High-Density Polyethylene) core. The double cuspated design gives drainage two layers: firstly, allowing for

HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable HDPE (High-Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides outstanding drainage and protection to the outside face of basement walls, preventing the build-up of water pressure and

Newton CDM is a BBA-certified cavity drain membrane from the Newton System 500 range. Used in conjunction with bespoke sump and pump configurations, backup systems, telemetry and ancillary options, Newton CDM provides a reliable and maintainable 'Type C' waterproofing solution for any habitable below-ground space that needs to be completely dry

FramePro W1 is a vapour permeable, airtight wall underlay, which is durable, flexible and lightweight allowing for easy installation. FramePro W1 is water resistant and has a resilient composition, which resists punctures and tears during installation. FramePro W1 can be utilised with Wraptite Tape to provide a simplified and robust method of

Delta sealed systems are recommended for below ground waterproofing where soil is retained, for example, basements and vaults. Membrane selection depends on the required finish and flow rate if applicable. All membrane junctions, fixing points, service entries and other protrusions are sealed with the Delta Seal range of sealing products. Where

Procheck A2, with its Class A2-s1,d0 fire classification to BS EN 13501-1, is considered non-combustible with no contribution to fire. Its composition comprises of the glass fibre backing, with a pure aluminium foil and clear lacquer coating. This composition affords the membrane its Class A2 performance as well as giving it a high degree of

Newton HydroBond is a Type A waterproofing system designed to provide a complete and continuous external waterproof envelope for below-ground structures. British Standard 8102:2009 defines Type A waterproofing as a barrier protection applied to internal or external surfaces of a structure in order to resist the pressure of water trying to enter

Delta's Type C cavity drainage waterproofing system comprises a cavity drain membrane, drainage system, package pump and control system. It is a maintainable basement waterproofing solution for new-build basements, refurbishment and retrofit projects. Type C waterproofing is defined as “drained protection”, where the structure itself provides

The Corden EPS GRM waterproofing and gas resistant membrane is self-adhesive. It provides a continuous waterproofing/tanking system for basements and substructures provided it is used in conjunction with Corden EPS Prime to ensure a suitable bond. The Corden EPS GRM waterproofing and gas resistant membrane is made from a polymer modified bitumen

V-GARD ALU 1500 is a high-performance vapour control membrane made from reinforced aluminium foil with a self-adhesive hot-melt backing, designed for use in roofing systems over metal or wooden decks. Suitable for most roofs, it controls moisture movement and improves air tightness, supporting energy efficiency and insulation performance

DELTA MS 500 - 8mm cavity drain membrane. Type C Drained Protection. BBA approved. Supplied in 2.4 / 2.0 x 20m rolls

V-GARD PE vapor control foils are LDPE-based membranes designed to control moisture migration and improve airtightness in roofing systems with mechanically attached or loosely laid insulation: LDPE vapor control membrane for roofing; high vapor resistance with Sd values over 110 m (0.2 mm) and 220 m (0.4 mm); made from a high percentage of

Proctor Air® is an air- and vapour-permeable, highly water-resistant roofing underlay. Its characteristics allow even very complex pitched roofs to breathe, without the need for air gaps or secondary venting. The high-performance meltblown core at the heart of Proctor Air allows natural air movement to ‘supercharge’ the passage of moisture vapour

Delta ventilated waterproofing systems are recommended for above ground situations or in areas where no free running water is expected, for example where external pavements have been built up. Ventilated system have an air gap at top and bottom. All joints and fixings are sealed. This method is a sympathetic solution in Heritage properties as a

Newtonite 801 Mastic is a non-toxic, solvent-free, multipurpose silicone sealant primarily used with the Newlath 805 Mesh Membrane and Newtonite 803 Membranes - applied to the plug before fixing into the membrane, Newtonite 801 Mastic seals the penetration and prevents bridging between the damp substrate and new internal surface. Applied to the

Delta Plaster Lath is an easy to use 7mm meshed damp proofing membrane system which eliminates dampness, the effects of salts and contaminated backgrounds from walls. The meshed key surface provides a key for render, plaster, or dab fixing plasterboard. Delta Plaster Lath's dimpled design creates an air gap, which insulates and allows for