Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Vapour control layers
(28)
Vapour control layers on BUILDING DESIGN. Helping you find the best solution for your project.
Vapour control layers - helping you find the best solution for your project.
Fireshield® - vapour-permeable, fire-retardant walling membrane
Fireshield® is a vapour-permeable and fire-retardant membrane for use on walls behind cladding. The unique coating eliminates fire spread rather than just resisting it. It is installed and fixed to the substrate in the same manner as standard breather membranes using mechanical fixings. Fire-proof surface - unique composition actively reacts to
V-GARD ALU 1500 - aluminum roof vapour barrier membrane
V-GARD ALU 1500 is a high-performance vapour control membrane made from reinforced aluminium foil with a self-adhesive hot-melt backing, designed for use in roofing systems over metal or wooden decks. Suitable for most roofs, it controls moisture movement and improves air tightness, supporting energy efficiency and insulation performance
Procheck 500 - vapour control layer (VCL)
Procheck Premier 500 is a strong reinforced polyethylene vapour control layer with good vapour resistance. The woven extruded polypropylene multifilament scrim reinforcing provides improved nail tear resistance. The sheet is translucent to ease the installation and later inspection of support arrangements, and is the grade utilised by many leading
Procheck Adapt - variable-permeability vapour control layer
Procheck Adapt is a high-performance, variable-permeability vapour control layer for use in a variety of commercial and residential applications. It is designed to protect the building fabric from potential risks of condensation and will also act as an airtight barrier. Its variable permeability adapts to changes in humidity levels becoming more
V-GARD Vapor Control Membrane - aluminum vapor barrier for roofing
V-GARD™ vapor control membrane is made from fibreglass reinforced aluminium foil with a self-adhesive bituminous backing, designed as a high-strength vapour barrier for roofing systems: high-strength vapour barrier membrane for roofing applications; excellent vapour resistance with Sd value >1,500 m; resistant to foot traffic and mechanical
Procheck 300 lightweight, reinforced, polyethylene, vcl
Procheck 300 is a lightweight, reinforced, polyethylene, vapour control layer for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The woven, polypropylene, multifilament scrim reinforcement provides good resistance to tears and punctures: vapour
Procheck® FR200 - vapour control layer for roofs and walls
Procheck FR200 is a vapour control layer made from fire-retardant materials, designed to manage moisture movement in building envelopes. Suitable for use in walls and roofs, it helps reduce condensation risk while meeting fire safety requirements
FramePro® W1
FramePro W1 is a vapour permeable, airtight wall underlay, which is durable, flexible and lightweight allowing for easy installation. FramePro W1 is water resistant and has a resilient composition, which resists punctures and tears during installation. FramePro W1 can be utilised with Wraptite Tape to provide a simplified and robust method of
Procheck® A2 - non-combustible, vapour-resistant, air-tight membrane
Procheck A2, with its Class A2-s1,d0 fire classification to BS EN 13501-1, is considered non-combustible with no contribution to fire. Its composition comprises of the glass fibre backing, with a pure aluminium foil and clear lacquer coating. This composition affords the membrane its Class A2 performance as well as giving it a high degree of
Reflectatherm Plus air and vapour control layer for internal use
Reflectatherm Plus is a reflective, high-resistance air and vapour control layer for internal walls, ceilings and floors. It is specifically designed to enhance the thermal performance when placed on the warm side of the insulation. The membrane should be installed with the foil side facing the cavity. In ceilings the product is placed between the
Façadeshield® UV - breathable vapour control layer for walls
Façadeshield UV is a vapour control layer designed to ensure the building fabric maintains good water resistance and breathability behind open-jointed cladding. It is a non-woven breathable membrane that combines water resistance and UV resistance with an aesthetically-pleasing dark colour to provide a 'shadow' appearance within open rainscreen
V-GARD PE Vapor Control Membrane - recycled LDPE roof moisture barrier
V-GARD PE vapor control foils are LDPE-based membranes designed to control moisture migration and improve airtightness in roofing systems with mechanically attached or loosely laid insulation: LDPE vapor control membrane for roofing; high vapor resistance with Sd values over 110 m (0.2 mm) and 220 m (0.4 mm); made from a high percentage of
Fireshield® delivers safety for Lisset Homes
The introduction of the Building Safety Act 2022 was focused around higher-risk residential buildings, defined as being above a certain number of storeys or a certain height. But a culture of taking fire safety seriously applies to buildings of all types – and park homes designed for short-term holiday rentals are no exception. For Lissett Homes- PROJECT
A Proctor Group
- Daltex® VCL vapour control layers are high resistance vapour barriers specifically designed to reduce the transfer of water vapour through the building or structure when placed on the warm side of the insulation. Daltex® VCL products are ideal for use in a range of construction applications including walls, ceilings, and floors. In addition to
- PRODUCT
- Don & Low
Vapour control layers - helping you find the best companies for your project.
Bailey
Capital Valley Plastics
Cwmavon Works, Cwmavon, Pontypool, NP4 8UWDon & Low
Certain construction designs call for a complete air and vapour barrier to control condensation and air movement within the building. Our vapour control layers are high resistance vapour barriers for internal walls, ceilings and floors, specifically designed to prevent the transfer of water vapour through the structure when placed on the warm side
Newfordpark House, Glamis Road, Forfar, DD8 1FRDuPont Tyvek
Air and vapour control layers (AVCLs) suitable for roofs, walls and floors help to reduce convective heat losses but also provide highly engineered vapour control for breathing systems. When installed continuously with all laps and penetrations sealed, an AVCL will provide effective condensation control and airtightness for all building types
470 Bath Road, Arno's Vale, Bristol, BS4 3APGCP Applied Technologies (UK)
487-488 Ipswich Road, Slough, SL1 4EPGlidevale Protect
Industrial Textiles & Plastics
Supplies vapour control layers and breather membranes for roof and wall construction applications. Vapour control layers are suitable for warm, cold and high humidity roofing applications, including bakeries and textile factories. Breather membranes are suitable for use in roofs and walls. Gas barriers protect against radon and methane gas
Stillington Road, Easingwold, York, YO61 3FAInstar UK
Offers a self-adhesive vapour barrier comprising an aluminium top surface which is double reinforced by an integral glass fibre and polyester film and a high tack self adhesive bitumious bitumen layer on the underside
Holland House, Valley Way, Rockingham Road, Market Harborough, LE16 7PS
