Product Cavity drain membrane
Material High density polyethylene
Fixing Mechanically fixed
Suitability Basements
Floors
Foundations
Walls
Thickness (mm) 8
Roll dimensions (w x l) 1x20, 1.5x20, 2x20, 2.4x20, 3x20m
 
 
 

DELTA®-MS high dimple density membranes are made of high density polyethylene. They have a high compressive strength and feature more than 1800 dimples per metre squared for efficient pressure distribution and low point loads, even on perimeter insulation.

Typical applications include sub-base coursing under concrete floor slabs, foundation wall protection and as a seepage layer within cavity walls.

DELTA®-MS membranes are non-degradable in soil, non-polluting in drinking water and will provide additional heat insulation.

They have flat overlapping edges the ensure precisely fitting joints and a diagonal dimple configuration that permits straight creases.


DELTA®-MS high dimple density membranes are made of high density polyethylene. They have a high compressive strength and feature more than 1800 dimples per metre squared for efficient pressure distribution and low point loads, even on perimeter insulation.

Typical applications include sub-base coursing under concrete floor slabs, foundation wall protection and as a seepage layer within cavity walls.

DELTA®-MS membranes are non-degradable in soil, non-polluting in drinking water and will provide additional heat insulation.

They have flat overlapping edges the ensure precisely fitting joints and a diagonal dimple configuration that permits straight creases.


Interested in this product?
Call 01992 523523
OR
 
 
 
Downloads
  • DELTA® MS Protection
    DELTA® MS Protection
    4pp 283.76KB
    Download
 
 
 
Enquire
 


Related entries

  • Delta Membrane Systems: Ground gas and waterproofing solution - brownfield site
    Ground gas and waterproofing solution - brownfield site
    Delta Membrane Systems
    A brownfield site - a former vehicle repair workshop - was being converted into a dwelling. The local authority required a gas membrane to be installed and independently verified to protect from any possible VOCs and other...

Also by Delta Membrane Systems

Delta Membrane Systems address and contact details

Delta Membrane Systems Ltd
DELTA House
Merlin Way
North Weald
Epping
CM16 6HR
Tel: 01992 523523
Fax: 01992 523250
View on map
 
Follow Delta Membrane Systems
 
Not found what you're looking for? View other options

Ask Delta Membrane Systems about

DELTA®-MS high dimple density membranes