RHEINZINK angled standing seam system is a facade and cladding solution made from zinc panels, designed for small and large surfaces, including fascias, upstands, and parapets. Panels can be installed vertically, horizontally, or diagonally, and are suitable for both standard and complex architectural designs.

  • Facade and cladding system using zinc panels with angled standing seams
  • Variable panel lengths and widths allow flexible design and segmentation patterns
  • Panels can be installed on tapered, concave, or convex surfaces
  • Low material stress due to single-side seam closure
  • Ready-made profiles or on-site production with mobile roll formers
  • Compatible with cross joints or half-staggered cross seams
  • Matching accessories support smooth and rapid assembly

Applications

  • Facade cladding
  • Cladding small surfaces
  • Fascias
  • Upstands
  • Parapets
  • Visually separating roof and facade surfaces

Dimensions

Panel width = 430 mm

Coil width 500 mm

Seam height approx. 25 mm

Seam width approx. 12 mm

Metal thickness 0.7 mm (0.8 mm for visual reasons)

Materials

Made from zinc

Installation

Panels delivered with ready-made profiles or bevels, or produced on site using mobile roll formers

Can be installed vertically, horizontally, or diagonally

Suitable for cross joints or half-staggered cross seams