Hydron provides fire-retardant paints for a wide range of substrates in a number of clear or pigmented decorative finishes.

Nu-Flame paint systems have been developed for walls and ceilings where an upgrade to a Class 0 surface spread of flame rating is required. Products are also available for coating steelwork, wood and timber.

Range

  • Nu-Flame AG Colourcoat

  • Nu-Flame FR Acrylic Eggshell

  • Nu-Flame FR Scrubbable Colourcoat

  • Anti-Bacterial Colourcoat

  • Nu-Flame Heat Insulating Basecoat

The paint systems comply with the test reports WF N° 145477 and 145478 issued by Warrington as tested on the Class 4 Warrington blue board. This is available in either a single and multi-coloured system.

Internal fire upgrade systems

Nu-Flame Fire Upgrade System is the ideal solution for the over-coating of multi-layered paints. Communal areas such as stairwells, corridors and lift lobbies can be coated without the need to strip and remove the current paint job, saving time and money.

Other advantages of this system includes the fact that unique site specifications can be produced, in order to create a bespoke recommendation to suit requirements.

Fire protection for timber

Nu-Flame Clear Impregnation is a water-based, ready-to-use fire-retardant solution for internal or external use that, when applied, is absorbed into the surface of the substrate. It is non-toxic, solvent-free, completely colourless, and odourless. In addition, a variety of stains and varnish can be applied to create the desired effect.

Nu-Flame Timbercoat pigmented intumescent paint is applied to internal or external bare or previously painted timber. Other coatings can be applied in order to provide additional protection.

Fire protection for steel

Nu-Flame W Steel Basecoat is a thin film water-based paint system that provides fire resistance to structural steel and cast iron.

Nu-Flame Steel Top Coat is a hard single-coat, high-build flame-retardant and anti-corrosion system for steel and cast iron. It has an extended lifespan of up to 50 internal years. It is made to order and available in any British Standard or RAL colour.

Nu-Flame Fireguard is a thin-film, solvent-based decorative system, tested to BS476:Pt 8:1972 and BS476:Pt 20:1987.