On this page
KeeGuard® Topfix metal roof edge protection
Product
Illustrations
Fast facts
Description
Downloads
Related info
Addresses

Safesite

Call 01293 529977
Download documents
Visit website

KeeGuard® Topfix metal roof edge protection

KeeGuard® Topfix is available in either galvanised or aluminium options. A base plate with multiple fixing centres is fixed directly on to the profile...

Click for full image

Roof edge protection tested to EN 13374

1/12

Material	Galvanised steel
Installation	Fixed

KeeGuard® Topfix is available in either galvanised or aluminium options. A base plate with multiple fixing centres is fixed directly on to the profile sheeting by either rivets or non-penetrative two-part clamps, and a butyl sealing strip maintains the roof’s integrity.

This unique plate design allows the system to be fitted to a wide range of profile sheet centres and provides a support for the vertical standard leg which can be adjusted from 0-11°. The horizontal rails are then simply fitted to the open saddle fittings to provide a collective fall protection solution.

KeeGuard® Topfix has been tested to EN 13374: Temporary Edge Protection Systems - Product Specification Test Methods and has been awarded a Class A Pass.

Features and benefits

Collective protection for metal profile and standing seam roofs
Non-penetrative solution for standing seam roofs
Modular ‘off the shelf’ system
Watertight fixings for metal profile roofs

Safety standards

Fully tested to meet or exceed current safety standards including:

BS EN 13374 Class A
BS EN 14122 part 3

KeeGuard® Topfix should be inspected and recertified annually in order to ensure the safety of the systems.

KeeGuard® Topfix has been tested to EN 13374: Temporary Edge Protection Systems - Product Specification Test Methods and has been awarded a Class A Pass.

Features and benefits

Collective protection for metal profile and standing seam roofs
Non-penetrative solution for standing seam roofs
Modular ‘off the shelf’ system
Watertight fixings for metal profile roofs

Safety standards

Fully tested to meet or exceed current safety standards including:

BS EN 13374 Class A
BS EN 14122 part 3

KeeGuard® Topfix should be inspected and recertified annually in order to ensure the safety of the systems.

Downloads

KeeGuard® Topfix - operation and maintenance
18pp 1.32MB
Download

Enquire

Related entries

Should you have a roof walkway?

Safesite

Ensuring the safety of those who work at height on buildings should be a priority for both site managers and designers. Under the Construction (Design and Management) Regulations 2015, foreseeable risks should be eliminated,...

Are you meeting your roof safety responsibilities?

Safesite

When you have a safety system installed on your roof, or on the roof of a building you manage, you might feel you’ve done your bit for health and safety. Time to sit back and enjoy the peace of mind, right? Not quite. Meeting...

Safesite roof access safety solutions for Britvic

Safesite

KeeWalk®, KeeGuard® Topfix and KeeLine® systems and a number of CAT access ladders were installed by Safesite to ensure safe roof access at all times at Britvic's Robinson Concentrate Squash manufacturing facility in Norwich.

Edge protection and anti-slip surface at harbour

Safesite

KeeGuard® Topfix edge protection and Kee Walk® walkway were installed by Safesite for Wightlink Ferries on their refuelling tanks moored in Portsmouth Harbour to allow safe access to the sounding caps and level sensors on top of...