Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Adhesives & sealants
(251)
Adhesives & sealants. Find the best solution for your project here.
Adhesives & sealants - helping you find the best solution for your project.
weiss™ Pave Clean Pro - stone and concrete paving cleaner concentrate
weiss™ Pave Clean Pro is a pH neutral, acid-free concentrate for cleaning natural stone, porcelain, clay, and precast concrete paving and flooring. Removes oil, food, grease, and tyre marks without damaging the surface patina. Suitable for routine and spot cleaning. Supplied in 1-litre, 5-litre, and 10-litre plastic bottles: concentrated cleaner
weiss™ Stain Protect Pro - water-based stone and paving sealer for outdoors
weiss™ Stain Protect Pro is a water-based surface impregnator for natural stone, porcelain, clay, and precast concrete paving and flooring. Delivers invisible, vapour-permeable protection against oil, fat, and grime stains without altering colour or slip resistance. Made from resin, polymer, and solvent-free ingredients. Suitable for interior and
weiss™ CSR Power - acid paving and brick cleaner for cement stains
weiss™ CSR Power is a cleaning solution made for removing stubborn cement stains from acid-resistant stone, porcelain, clay paving, masonry, and brickwork. Contains phosphoric acid and hydrochloric acid with a pH of ~1. Inhibits rust and removes efflorescence. Typical coverage is 10-15m² per 5L canister: removes hardened mortar, concrete, and
weiss™ Pre-Install - pre-construction protection impregnator
weiss™ Pre-Install is a colourless pre-construction paving protection impregnator designed to minimise staining and contamination during installation. Suitable for stone, porcelain, clay, and precast concrete paving units. No colour change to surfaces. Supplied in 1-litre, 5-litre, and 10-litre plastic containers: colourless liquid for protecting
weiss™ CSR Extra - phosphoric acid paving and brickwork cleaner
weiss™ CSR Extra is a cleaning solution made from phosphoric acid for removing cement and mortar haze from acid-resistant stone, porcelain, clay paving, masonry and brickwork. Effective on polymer modified cement, calcium aluminate and hybrid mortars. Inhibits rust and removes efflorescence. Use with caution on precast concrete, marble, limestone
weiss™ Colour Enhancer - wet-look sealer for stone and concrete paving
weiss™ Colour Enhancer is a wet-look treatment for natural stone, porcelain, clay, and precast concrete paving and flooring. Enhances colour while maintaining slip resistance and vapour permeability. Protects against stains from grease, oils, fats, fast food, tyre rubber, and footwear. Suitable for interior and exterior use. Supplied in 1-litre
weiss™ Extra-KT - gel cleaner for oil stains on stone and concrete paving
weiss™ Extra-KT is a gel cleaner made for removing deep oil and grease stains from concrete, porcelain, and natural stone paving. Solvents in the gel draw out contaminants below the surface. Removes stains from oil, diesel, petrol, candle wax, and BBQ grease. Supplied in a 1L pouch: gel cleaner for stubborn oil and grease stains on paving; removes
illbruck CT113 (formerly illbruck OT 13) is a viscous contact adhesive based on synthetic rubber and resins. Benefits: ideal for bonding of illbruck FF220 EPDM membranes in facade installations; cured adhesive has excellent resistance to weathering and the ageing effects of UV exposure; adhesive accommodates a wide fluctuation in temperature from
ISO-CELL PE-CORD is a round profile seal made of closed-cell polyethylene foam which consistently prevents draughts and heat loss. It is used as a reliable backfill on building joints sealed with spray-type sealants, and is characterised by is excellent compatibility with all standard sealing materials. When used as a filling profile for sealing
ISO-CONNECT EPDM is a sealing band that serves as a sealant on windows and facade constructions. ISO-CONNECT OUTSIDE EPDM has an active breathable membrane that provides an excellent seal against weather influences and guarantees good diffusion behaviour, making it especially suitable for window sealing projects in external areas. It conforms to
ISO-CONNECT VARIO SD is a humidity regulating special foil for sealing joints in accordance to the energy saving regulations (Building Energy Act (EnEV was valid 31.10.20)) on windows, doors and panels. Due to its special capabilities, the sd value of this universal foil adapts to the seasonal temperature gradient changes that occur within the- PRODUCT
- ISO-CHEMIE
Flexible fire door seals provide a permanent seal for fire-rated timber and metal door edges and frames. They are suitable for rebates in timber door leafs and frames, or the surface of metal door leafs and frames. They are quick and easy to fit as they do not need specialist tools for installation. They can be used in new-build and retrofit
The ISO³-FACADE SEALING SYSTEM offers a range of system products for flexible use in different versions and dimensions, every one of which has been designed to meet the special demands made on a professional facade seal. Facade joints are subject to extreme climatic and physical stresses. Heat, cold, rain, sun, wind and movement of building
The PP-3 provides a service access point to run cables and pipes into the building. It gives the building team and service engineers a consistent solution for necessary penetrative details on flat roofs. PP-3 risers are made for waterproof durability, their benefits include: powder coated aluminium- for durability; pre-primed base section - for
ISO-BLOCO ONE is a special multi-functional all-in-one joint sealing tape. With a low a-value of zero, the pre-compressed tape is 100% airtight at the internal seal area, minimising heat loss by convection. It also possesses an optimal vapour diffusion gradient from the inside outwards (50:1) enhancing the external transmission of moisture- PRODUCT
- ISO-CHEMIE
The ISO-BLOCO MULTI-FUNCTIONAL TAPE is a special joint sealing strip with outstanding functionality that can be used for a wide range of applications. It is used to seal connection joints of windows and doors against drafts and driving rain. At the same time it also provides thermal and acoustic properties throughout the joint. The ISO-BLOCO
Caberfix Joint & Joist PU adhesive and sealant is used to create a strong, silent and flexible bond between Caberdek floors and joists. It will bond to a wide variety of materials and can also be used to provide a 100% guaranteed waterproof seal in tongue and groove joints between boards. Joint&Joist is not affected by damp or wet weather, making
ISO-CONNECT KSKSEAL is an all-over self-adhesive, flexible sealing membrane made of polymer-modified bitumen with a flexible yet tearproof HDPE foil and is used for the external sealing of window and door elements in facade constructions. ISO-CONNECT KSKSEAL protects components in contact with the ground permanently against non-pressurised water- PRODUCT
- ISO-CHEMIE
The elastic joint sealing strips for facades need not be boring. Now there is the new ISO BLOCO 600 "COLOUR EDITION" range of colours. This opens up whole new possibilities for joint sealing – without having to forgo the tried and tested advantages of pre-compressed joint sealing strips: BG 1 tested according to the current DIN 18542 version 2009
A low-solvent based rigid set adhesive. Ideal for where traces of bitumen are present on reclaimed blocks etc: rapid setting and curing time, pump applicable; low VOC; suitable for under floor heating. Approximately 1m2 per kg
ISO-TOP BLUE PRIMER is a primer on an aqueous acrylatepolymer dispersion basis. It has been specially developed to improve the adhesion properties of acrylate, bitumen, butyl and hybrid polymer adhesives, as well as those of adhesive tapes on mineral surfaces. After curing, the result is a smooth, not permanently sticky film. The primer has a good- PRODUCT
- ISO-CHEMIE
ISO-CONNECT INSIDE FD is an extremely flexible and stretchable special foil for an air and vapour tight seal on window, door and panel connecting joints. ISO-CONNECT INSIDE FD consists of a flexible soft synthetic fleece, which is equipped with a self-adhesive strip on one edge for easy and effective application on window and door frames. The- PRODUCT
- ISO-CHEMIE
RIW Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, composite waterproof tape. When embedded in the Cementseal or Cementflex materials, it gives a highly flexible, impermeable seal over 'live' cracks and expansion/construction joints: construction / expansion joints; reinforcement of Cement Based coatings. concrete
illbruck external EPDM film is used for perimeter sealing of windows, doors and curtain walling to facades according to DIN 18195 and corresponds to DIN 7864-T1 Table 1. It is available in thicknesses of 0.75 and 1.2mm
