Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Structural concrete elements for buildings
(84)
Metal structural beams, floors, slabs and formwork for buildings on BUILDING DESIGN. Find the best solution for your project here.
Structural concrete elements for buildings - helping you find the best solution for your project.
ThermaBeam™ - insulated concrete flooring system
ThermaBeam™ is an insulated concrete flooring system, designed for ground floors in domestic and residential buildings. It integrates high-performance expanded polystyrene (EPS) insulation with structural grade reinforced concrete, forming a continuous insulated surface. Made with C45/55 concrete, the system eliminates air gaps to minimise heat
Precast concrete beam and block flooring system
Beam and block is a precast concrete flooring system consisting of precast, prestressed concrete beams that are laid between walls and infilled with either concrete blocks or polystyrene panels. Beam depths of 150mm and 225mm are available, with spans reaching up to 7 metres. Beams are supplied on a supply-only or supply-and-fix basis: precast
Precast concrete hollowcore flooring units
FP McCann produce hollowcore flooring units made from prestressed precast concrete. These concrete floor slabs are typically 1200mm wide, with depths from 100mm to 500mm. Prestressed concrete enhances structural performance. Suited to masonry, steel precast, and in-situ construction
Precast concrete ground beams
Ground beams are precast concrete structural components designed to span between foundation bases. They can be used to support brick or blockwork and act as a permanent shutter at the edge of an in-situ concrete floor slab. Ground beams can be designed to meet specific project requirements or supplied in standard dimensions. Quick off-loading and
H+H Celcon Vertical Wall Panels provides a masonry MMC solution
Celcon Vertical Wall Panels are storey-high panels of aircrete, designed to allow an exceptionally fast build method. Manufactured to the storey height of a house with a width of 600mm and a thickness of 100mm, Vertical Wall Panels are designed to be craned into place onto a bed of mortar on standard foundations. Blocks are joined using Thin-Joint
Stepoc concrete shuttering system
Stepoc is a system of concrete shuttering blocks that are highly-engineered and dimensionally co-ordinated. They are designed to accept vertical and horizontal reinforcement. Stepoc is filled with concrete, which is pumped down through the inter-connected cavities in the blocks. The blocks' unique design creates a cascade or waterfall effect which- PRODUCT
Anderton Concrete, part of Ibstock
Celcon building elements used by Barratt Homes
The SIG I-House System, based on the storey-high aircrete panels, delivers a complete house shell with weathertight roof and wrapped in insulation in just one week and is the result of a unique collaboration between H+H and SIG Off-Site. It is one of a number of building types being trialled by Barratt Homes which is keen to experiment with new
Somerset homes built with Celcon Vertical Wall Panels
When regional housebuilder, Galion Ltd was looking for a way to speed up the construction process without compromising on using traditional masonry materials for its Jarmany Hill site, it turned to H+H’s Celcon Vertical Wall Panels. Celcon Vertical Wall Panels are storey-high panels of aircrete that are craned into place for a fast build with the
Vertical wall panels for i-House method of construction
The i-House system using H+H Celcon Elements (vertical panels) was used on the re-development of a residential site in Stanpit, Dorset. i-House introduced developer and contractor Karm Homes to the concept of Modern Methods of Construction (MMC) while also providing the familiarity of a traditional building material. Karm Homes re-developed the
i-House™ offsite building solution for Lovell Homes
Lovell Homes is experiencing the full speed benefits of using the i-House™ offsite building solution on its Crown Meadows site in Norwich, trialing the promise that the system can provide the entire shell of a house in less than a week. 15 of the 69 plots comprising the development are using the i-House system. Lovell Homes recognises not only the
FP McCann supplies beam & block flooring for lakeside cabin at Lough Erne
FP McCann have supplied 103m2 of precast Beam & Block Flooring to ongoing Lakeside Cabin project on the banks of Lough Erne. FP McCann's traditional beam and block flooring systems use 178mm deep floor beams with a width of 106mm and spans of up to 6 metres. This scenic and private lakeside cabin is 103m2 and is due for high standard completion in
Beam and Block Flooring, Self-build house, Bourne End
As part of the decision making process the family had the previous house valued. At £350k it was lower than they had thought and confirmed the viability of a custom build. The family had clear ideas regarding what they wanted for their new house. It had to be ‘green’ with low energy consumption, have high levels of environmental comfort and be
H+H vertical wall panels used for speed and efficiency by Galion
When regional housebuilder, Galion Ltd was looking for a way to speed up the construction process without compromising on using traditional masonry materials for its Jarmany Hill site, it turned to H+H’s Celcon vertical wall panels. Celcon Vertical Wall Panels are storey-high panels of aircrete that are craned into place for a fast build with the
Vertical wall panels provide fast build solution for Karm Homes
The i-House system from H+H, which combines H+H Vertical Wall Panels (VWPs) with prefabricated floors and roofs, is being used by Karm Homes as a fast-build solution in the development of two chalet bungalows in Charlton Marshall. This Modern Method of Construction (MMC) meets the increasing demand for speed of delivery within the housebuilding industry
Dorset housebuilder employs Vertical Wall Panels for fast build
Karm Homes, a regional housebuilder specialising in affordable housing in Dorset and Hampshire, is currently developing two chalet bungalows in Charlton Marshall, near Blandford Forum. These rural three-bedroom homes will benefit from picturesque views of the surrounding countryside and are due to be finished by early summer. Karm Homes has chosen
- With minimal deflection and high resistance wear, Metsä Wood concrete formwork panels offer a long service life and a smooth finish. The cost-savings come from the quality of the panel coatings and the lay-up of the panel veneers. It is a combination that marries strength with repeated ease of use. This is an example of a superior birch formwork
- Corrugated and flat GRC (glassfibre reinforced concrete) permanent formwork has been extensively used for over 20 years. GRC formwork products can be designed to suit all supporting beam design. The design and final proportions of GRC permanent formwork takes into account factors such as the detail of the permanent works, the imposing loads from
- NOE-Schaltechnik has used birch plywood from Metsä Wood in its concrete formwork systems for decades. The German formwork expert is very happy with the quality-price ratios the strong birch plywood panels provide. Metsä Wood's birch plywood products deliver the industrial durability needed in concrete formwork systems. NOE-Schaltechnik
Structural concrete elements for buildings - helping you find the best companies for your project.
H+H UK
H+H is the UK's largest manufacturer of aircrete products, producing the Celcon Block range. H+H aircrete products offer a complete building material that meets the requirements of the Building Regulations, with the flexibility to offer solutions to hospitals, schools, offices, industrial warehouses and housing (social and private). Used in
FP McCann
FP McCann, headquarted in Belfast, is the UK’s market leader in the manufacture, supply and delivery of standard and bespoke precast concrete solutions. The company's twelve UK based quarries, Surfacing, Readymix and Precast manufacturing facilities supply a wide range of heavy building materials to the construction industry. FP McCann offers an
Anderton Concrete, part of Ibstock
With significant expertise and heritage in the civil engineering, landscaping and infrastructure sectors, Ibstock is a leading UK supplier of concrete retaining wall solutions. The business specialises in the manufacture of concrete wall blocks and soil reinforcement systems, essential components for the successful construction of a retaining
Unit 1, Cosgrove Business Park, Anderton Wharf, Soot Hill, Anderton, CW9 6AAAmvic Building Solutions
Amvic Building Solutions Ltd is the UK supplier of the Amvic insulated concrete formwork system. We also provide an construction service for projects based in the Yorkshire area
Amvic House, Unit 5 Linfit Court, Colliers Way, Clayton West, Huddersfield, HD8 9WLAmvic Ireland
Unit 11, Rosemount Business Park, 00 353 1899 1883, Dublin 11, Republic of IrelandAtlas Concrete
Solway House, Silloth Airfield, Silloth, Wigton, CA7 4NS
