Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Masonry
Masonry - helping you find the best solution for your project.
Stainless steel and mild steel windposts
Stainless steel and mild steel windposts for structural facades and brick walls are used to span vertically between floors of a building to provide additional structural strength to a wall where wind loads need to be addressed. L-profile, C-profile, box-profile, parapet and balustrade options available
TVS resilient wall ties
Where it is required to structurally tie an isolated wall into an unisolated structure, there is a potentia bridge in the box-in-box design. TVS resilient wall ties overcome this problem by integrating a high-performance Sylomer element into the wall tie. Available in a whole host of designs, depending upon the construction of the isolated and
FIRMA masonry support systems
FIRMA masonry support systems are designed to allow for typical building tolerances and on-site adjustments. Supplied complete with the appropriate fixing packs and accompanying drawings for simple on-site installation. Design and fabrication of secondary steel products. Galvanised mild steel for the support of masonry brick and blockwork
Windpost package for 5-storey office building - Putney
FIRMA collaborated with the designer, developer and main contractor to deliver a sizeable windpost package for Parklife, a 5-storey office building overlooking the Grade II listed Wandsworth Park in Putney, London. This 40,000 sq ft vacant office building has been converted into a high-quality 80,000 sq ft urban workplace. FIRMA's sister company
- Expansion joint ties are debonding ties supplied complete with PVC sleeve. 2mm thick by 25mm wide, the ties are available 200 or 300mm long, with other lengths to special order. The ties are manufactured from 304 grade stainless steel (BS EN10088-2
- PRODUCT
- Bluebird Fixings
- Timber frame tie are used to fix masonry to timber frame buildings. They are made from 0.5mm thick stainless steel. 250 ties per box complete with stainless steel ring shank nail Complies with strength requirements for a DD 140 type 6 tie To suit a 50mm cavity Tie nails are 50x3.35mm Ties should be installed at a density of 4.4 ties per square
- PRODUCT
- Bluebird Fixings
- Bluebird Screwties® provide an easy way of connecting new walls to existing buildings at right angles. They tie in walls without toothing and provide lateral stability for brick, block or stone. The ties can be used for internal or external walls. Galvanised Bluebird Screwties® are available for inner leaves. They are galvanised to BS EN
- PRODUCT
- Bluebird Fixings
- Frame cramps are used to tie timber frames to masonry. All are made from galvanised mild steel BS EN 10327:2004. Three sizes are available: 4", 150mm overall 6", 200mm overall 8", 250mm overall
- PRODUCT
- Bluebird Fixings
- 90° bend debonding ties are made from 304 grade stainless steel (BS EN 10088-2), and are supplied with PVC sleeves. They are used in expansion joints. The ties are also available without the sleeve
- PRODUCT
- Bluebird Fixings
- Bluebird cavity wall screw ties comply with the strength requirements of DD140-1 for a type 2 tie. They are used to connect new walls to existing buildings at right angles. Quick and easy to use, no special tools or skills required to install them. The ties are made from austenitic stainless steel, and are suitable for 50 or 75mm cavities on
- PRODUCT
- Bluebird Fixings
- Bluebird produces screw ties designed to be used in conjunction with membrane systems
- PRODUCT
- Bluebird Fixings
- There are many issues associated with failing wall ties: Horizontal and stepped cracking of the masonry / mortar Possible bulging of the walls The original building specification may have used too few wall ties Detection of the problem requires specialist equipment Timberwise have fully trained and experienced surveyors who have a range of systems
- PRODUCT
- Timberwise
Masonry - helping you find the best companies for your project.
FIRMA
Fulfilling a market need for non-combustible construction support systems fabricated in mild steel, aluminium and stainless steel. This requirement was realised with our sister company; BA Systems. Whilst working with contractors we were often asked to fabricate additional construction support systems such as stainless steel cavity trays or
TVS Acoustics
Established in 2009 as a specialist supplier of noise and vibration solutions, The TVS Group has successfully evolved into four key strategic divisions; TVS Sports Surfaces, TVS Gym Flooring, TVS Play Surfaces and TVS Acoustics. TVS Acoustics is a leading acoustics, noise and vibration control specialist as well as a leading supplier and installer
Low Bay, Commerce Street, Carrs Industrial Estate, Haslingden, Rossendale, BB4 5JTACS Stainless Steel Fixings
Innovation Way, Cross Green, Leeds, LS9 0DRAlderdale Fixing Systems
New John Street, Halesowen, B62 8HTAllmat Building Supplies
Allmat (East Surrey) has been trading for over 25 years. The company offers a wide range of products for the building construction industry, from carpenters metalwork, wall ties, wall connectors, lintels, roofing felts and membranes to guttering and drainage products, plumbing, fixings, sealtns, plasterboard and aggregates.T The company has its
Kenley Water Works, Godstone Road, Kenley, CR8 5AEAncon
Ancon designs and manufactures high integrity steel products for the construction industry, supplying customers worldwide in a variety of sectors from small-scale residential developments to major infrastructure projects. The company employs 600 people at three advanced manufacturing facilities in the UK and overseas operations in Mainland Europe
President Way, President Park, Sheffield, S4 7URBekaert
Parkhouse Road, Low Moor, Bradford, BD12 0QBBersche-Rolt
Stream House, Herons Ghyll, Uckfield, TN22 4BYBluebird Fixings
Established in August 1988 to produce for a new concept for connecting new walls to existing buildings at right angles, such as garage extensions. Bluebird Fixiing's product range has been expanded since then and now includes door cramps, as well as wire balloons to prevent birds from nesting and/or falling down chimneys, thus removing the hazard
Westminster Road Industrial Estate, Station Road, North Hykeham, Lincoln, LN6 3QYBritish Gypsum
British Gypsum, part of Saint-Gobain, offers a range of plasters, partition, wall lining, floor, ceiling and plasterboard systems for the residential, commercial and off-site sectors of the construction industry. Its manufacturing, testing and training facilities reflect its market leading status: plasterboard manufacturing lines in
Gotham Road, East Leake, Loughborough, LE12 6HXCatnic
Catnic is recognised as a leading brand in the building products sector. It has a reputation for superior quality and reliability that is backed by excellent service and technical support. The company has a record of introducing new and improved products to help the building industry meet the ever-changing environmental, legislative and economic
Pontypandy Industrial Estate, Caerphilly, CF83 3GLChristie & Grey
Christie & Grey is a leading manufacturer of vibration, noise and shock control products
Morley Road, Tonbridge, TN9 1RA
