Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Trims & accessories
(140)
Trims & accessories on BUILDING DESIGN. Helping you find the best solution for your project.
Trims & accessories - helping you find the best solution for your project.
RidgeFast dry fix ridge system
Marley RidgeFast provides a completely dry fixed ridge on roofs. It is quick and easy to install, since the units are mechanically fixed without any need for mortar. RidgeFast provides a continuous 5mm ventilation along the ridge, and can be used with all of Marley's tiles and slates as well as products from other manufacturers. RidgeFast can be
Dry fix bonding gutters for jointing two roof coverings
Dry fix bonding gutters from Marley provide an effective means of weatherproofing the junction between two different roofing materials. Suitable as an effective and less costly alternative to conventional lead and mortar materials, the bonding gutters quick and easy to install, and can be used with a range of tile types: quick and easy
JB Red Batten - timber roofing batten
JB Red Battens are factory-graded timber roof battens made in the UK for pitched roofing, designed to meet BS 5534 standards. Highly visible due to their red pigment, they are preservative treated for durability and are third-party certified for quality and compliance: factory-graded timber battens for pitched roofing to BS 5534; red pigment for
JB Red Batten - timber batten for roofing and construction
JB Red Battens are factory-graded timber roof battens made in the UK for pitched roofing, designed to meet BS 5534 standards: factory-graded timber battens for pitched roofing to BS 5534; red pigment for easy on-site identification; preservative treated to BS 8417:2011 Usage Class 2 with MicroPro®; consistent thickness and width for
HipFast universal dry-fixed ridge ventilation system
HipFast is a simple and rapidly-installed dry-fixed ridge ventilation system suitable for all duo-pitch roofs using all Marley tile profiles, as well as those of other manufacturers. Features: high-grade aluminium flashing; hydrophobic membrane for maximum weather resistance; elastomeric for easy installation - prevents rucking; bespoke batten
Cloak verge tiles for use with clay/concrete plain tiles
Marley cloak verges provides a strong, weathertight and maintenance-free verge that meets the requirements of BS 5534. These purpose-made and colour-matched verge tiles are fast and simple to install, offering a traditional stepped appearance but with the benefit of mechanically fixing the tiles: for use with clay and concrete plain tiles
Dry fix roof soakers for use with flat tiles
Marley dry fix roof soakers provide a simple and effective solution for use with flat tiles. Strong, lightweight and affordable, they are ideal for use on a wide range of roofing projects. The soakers are availabe in choice of sets compatible with the appropriate tile range, including Modern, Edgemere and Ashmore clay or concrete plain styles
RHEINZINK Roof Architecture - Zinc accents for roofs and facades
Rheinzink offers feature accents on dormers, chimneys, gables, balconies, canopies and walls to help with architectural diversity. Rheinzink is compatible with virtually every other material because the reserved aesthetics of Rheinzink never compete with other materials; it blends effortlessly into every architectural environment. Continuous
Cast metal roof finials
Leander Architectural produces decorative cast aluminium roof finials. Finial designs include larger, more decorative types for roofs of buildings such as houses, shops and conservatories. Manufactured in Leander's in-house foundry and workshop. Leander architectural castings are normally made in a high-silicone cast aluminium alloy. Other
Roofing battens for new development at Eton College
The Bekynton Field development is part of the renewal and conservation project to protect and improve Eton College. JB-RED batten was chosen by specialist sub-contractor Attley’s as the preferred roofing batten for the renewal project
JB-RED roofing battens for Kings Cross Station
JB-RED roofing battens were used as part of the transformation of Kings Cross Station. The Grade-I listed Eastern Range Heritage building has been renovated with a new £1.1m roof using Marley's materials. The Eastern Range part of Kings Cross Station, built in 1852, had been derelict for 24 years and has now been brought back to life to provide
- Swish Jumbo™ PVC square fascia boards are strong, load bearing profiles. They are manufactured as 20mm thick white boards with a square lower edge with a rebate for engaging the soffit board. They are suitable for new build and replacement projects
- PRODUCT
- Swish Building Products
- Located at the junction of two primary elements, the eaves of a building are an important but often overlooked feature. While masking the junction of wall and roof, any eaves system chosen must be able to neatly overcome building tolerances and, since these areas are invariably not easily accessible, be relatively maintenance-free. This critical
- PRODUCT
- Lockmetal
- Sills and flashings are made to measure. They are suitable for most conditions that require the weathering of external wall insulation systems and rendering. Precut lengths and push fit or welded end caps are available on request and jointing pieces to suit any section can be supplied where continuous lengths of flashings are installed. Standard
- PRODUCT
- WEMICO
- Bailey I-Line is an eaves feature that offers new creative possibilities for architects and designers. Inspired by the use of exposed steel beams, an designed to evoke strength and structural integrity, I-Line brings the benefits of light weight and low maintenance usually unavailable to exposed structures. Bailey I-Line can be used as a single
- The Bailey V-Joint soffit and fascia system has been designed to bring the appearance of planked soffits to a wide range of construction projects. The system is used in both contemporary and traditional structures to bring distinctiveness and individuality to almost any project. Whilst Bailey V-Joint was inspired by traditional planked soffits it
- Swish produce a comprehensive roofline system. The fascia boards are available in Square, Bullnose, Flat, Ogee and Jumbo. Made from UPVC they are maintenance free and will last the lifetime of the building, at the end of their service life they can be fully recycled. The White profiles carry a 20 year guarantee while Swish offer a 10 year
- PRODUCT
- Swish Building Products
- Hip irons are made from hot-dip galvanised steel (BS EN 10327:2004). Dimensions: 300x150x3mm. A stainless steel version is also available to order
- PRODUCT
- Bluebird Fixings
- The upgraded Type CSV circular soffit ventilator can be used in new or existing soffits and permits easy and quick upgrading of existing structures. The unique injection moulded ventilator has a deflecting louvred face that promotes positive air entry and insect screening. Unlike standard ventilators, the unique CSV may be rotated so that the
- Swish decorative bargeboards are made from highly sustainable Cellular PVC, which is well suited to the exposed conditions at the roofline. Situated in elevated positions and subject to extreme weather conditions, the bargeboard is difficult and costly to access and maintain in a proper manner. Swish Cellular PVC will last the life time of the
- PRODUCT
- Swish Building Products
- Swish Polo™ ventilated soffit boards ensure roof void ventilation in accordance with UK Building Regulations for new build and replacement works. They are available in two slot configurations to provide the required equivalent of a 10mm or 25 mm continuous air path, respectively. All Polo™ boards are 9mm thick, supplied in 5m lengths, and available in various widths and colours
- PRODUCT
- Swish Building Products
- Jumbotec™ profiles are rigid PVC profiles providing over fascia protection for new and refurbishment projects. They eliminate the problems arising from deterioration of traditional roofing felts. Eaves protection and ventilation can be provided together above the fascia board by using an eaves protector. Eaves protectors are made of rigid PVC
- PRODUCT
- Swish Building Products
- Laser-Line is an accurately fabricated one-piece component that can be aligned using laser beams or traditional methods. Using laser beams allows complete elevations to be aligned quickly and straightforwardly, and with far greater accuracy than with traditional measurement. Laser-Lines strength and light weight means that the carcassing brackets
- Swish supplies two over-fascia ventilator strips, providing the equivalent of a 10mm (C504) or 25mm (C505) continuous air gap. They are suitable for new build or refurbishment applications. Building Regulations require the roof void to be ventilated according to the pitch and shape of the roof, to prevent the build up of condensation that could
- PRODUCT
- Swish Building Products
