Internal walls

SCR-80 Series crash rails feature a curved Acrovyn® or Acrovyn® PVC-Free cover over a continuous aluminium retainer providing extensive impact protection. The 203mm-high, curved profile crash rails offer a modern aesthetic and extensive impact protection for high traffic areas

AUTOPA's trolley protection rail, designed with the retail market in mind, is used to protect vulnerable walls and windows from trolley damage. Sitting only 185mm above the ground, this railing can be used to protect both internal and external structures and is commonly found around entrances or glass panels: manufactured from galvanised mild

FreeWall is a modular greenwall room divider system, for single or double-sided planting with a choice of standard or custom plant mixes. Rear panels can be left blank for use as notice boards, logo displays, or signage. Mobile options are available with a castor base: modular greenwall divider system for interior or exterior spaces; single or

Modular, reusable fireproof screens made from 80mm-thick steel-faced, mineral wool-filled panels, certified to EN 13501-2:2008 A2 s1 d0 and EI60 for 60-minute fire resistance. Designed for quick floor-to-ceiling or free-standing installation, these panels suit indoor and outdoor construction site partitioning and weatherproofing: 60-minute fire

This inexpensive and effective column protection hoop is designed for to protect lamp posts and lighting columns against accidental damage by slow moving vehicles in car parks and other controlled traffic environments. 360 degree protection is achieved by using 2 hoops either side of the post: finished galvanised as standard; can be powder coated

The ACP2 Column Protector 3-sided guardrail is designed to protect columns in outdoor or indoor environments. Made from mild steel tube and section, galvanised to ensure longevity. It can be surface-bolted or ground-fixed

SGL20 is a 20mm PVC-U 'L' profile used for creating shadow gaps in architraves. It is manufactured from exterior grade, unplasticised PVC-U that is impact-resistant and UV-stable. SGL20 profiles are used to form a shadow gap at the edges of plasterboard next to door frames, ceilings and skirting boards where the adjacent finish is seen

The ACP21 Column Protector 3-sided guardrail is designed to protect columns in outdoor or indoor environments. Made from mild steel tube and section, galvanised to ensure longevity. It can be surface-bolted or ground-fixed

CS Acrovyn® combined crashrails and handrails are elegant and ergonomically designed. They provide impact protection in circulation routes, whilst also affording pedestrian support with the rounded top section. Optional bracket stand-offs are available, as well as anti-ligature options. All combined hand/crash rails are available in colours from

Modular, quick-to-install internal hoarding system made from white steel-faced, mineral wool-filled panels with perforations for sound absorption. Designed for temporary acoustic and dust-proof screening during construction or refurbishment, it achieves an average 34dB sound reduction and is reusable across multiple projects. Panels are tested to

Hoardfast is a quick-to-install, modular, freestanding or floor-to-ceiling internal partitioning and screening system that can be used as a temporary divider, permanent partition wall, or to create internal rooms in factories and warehouses. Height 1.12–5m; width 30–80mm; available in standard uPVC hollow fluted panel, steel-faced PIR foam

The VPP 1000 Column Protector guardrail is designed to protect columns in outdoor or indoor environments. Made from mild steel tube and section, galvanised to ensure longevity. Fits around pipes up to 250mm diameter; flanged for bolting to the wall and ground

The ASF cast iron corner bollard is suitable for internal or external building protection. As standard, it has a 90° cut out to wrap around the corner of a building. Patterns can be modified to fit other angles. Manufactured from 100% recycled cast iron. Cast iron does not rot like steel - even bare iron should last up to and beyond 100 years

Modular internal hoarding system made from 85% recycled uPVC. Designed for quick, clean installation during fit out, refurbishment and construction projects. Panels form temporary walls or screens to contain dust and noise, and can be reused, relocated and recycled at end of life. Quick to install and remove, saving set-up time on site

Renderplas PVCu high-quality drylining beads are suitable for skim plastering and drywall projects, providing protection for tape and joint applications. They are ideal for situations with high moisture or salt such as kitchens, bathrooms and pool enclosures, but are equally suited to all general plasterboard applications

The ACP4 Column Protector guardrail is designed to protect columns in outdoor or indoor environments. Made from mild steel tube and section, galvanised to ensure longevity. It can be surface-bolted or ground-fixed

Acrovyn by Design® offers a combination of wall / surface protection and image reproduction to protect and transform interiors. The panels can incorporate high-quality photographs, patterns, signage, branding or custom graphics, offering complete design freedom. They are used to create soothing and relaxing interiors in healthcare environments

Designed to protect external wall corners and structural protrusions in buildings from damage caused by impact, particularly in high-traffic areas. They help maintain appearance, hygiene and safety whilst reducing maintenance costs. The range includes models with free-floating Acrovyn covers over continuous aluminium retainers, as well as

Primarily used as a curtain to provide quick temporary division of an internal area to prevent contamination and overspray during washdown, or to restrict airflow and manage temperature. It can also be used to create booths, access points and divide large areas where regular access is required. Used externally Flexicurtain can provide accessible

Range of easy-to-install rub rails to protect walls from scuffs, scratches and abrasions caused by pedestrian traffic, chairs or lightweight trolleys. 3mm-thick, textured and through-coloured rub rails; bullnose edges to mould profile to the wall; four heights to suit project requirements; simple installation using tape and / or adhesive

The Renderplas EB0 is a flexible board edge bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to form smooth curves and to prevent cracking for all internal wall cladding, partitions and suspended ceilings that feature curves formed from plasterboard, as well as providing a smooth edge

The Renderplas EB0 is a flexible board edge bead manufactured to ISO 9001:2000 from exterior grade impact resistant UV stable unplasticised PVCu. Designed to provide protection to edges and to prevent cracking whether with skim plaster or tape and joint applications at door frames, windows and skirting boards or at a change of finish. Can also be

SGU15 is a 15mm shadow gap 'U' profile for architraves. It is manufactured to ISO 9001:2000 from exterior-grade, impact-resistant, UV-stable PVC-U. It is used to form a shadow gap at the edges of plasterboard next to door frames, ceilings and skirting boards where the adjacent finish is seen. Dimensions - 15mm gap and 24mm wing; depth - 12.5mm board

Created using Hoardfast, Westgate Global internal site rooms are used when there is limited or no available outside space for cabins, but you need to create and provide site rooms and welfare spaces for workers. Used widely across the fit out and construction sectors, Hoardfast site rooms can be installed free-standing or floor-to-ceiling