Type Sacrificial
Finish Clear
Composition Water based
Substrates Bricks
Ceramics
Concrete
Masonry
Painted surfaces
Plaster
Stonework
Timber / wood
Methods of application Roller applied
Spray applied
VOC level None
Max. coverage (m2/litre) 10-12
Touch dry (hours) 2 (depending on temperature)
Recoat time (hours) 2
No. of coats required 2-3
Container size (litres) 5 & 25
 
 

Originally developed to protect stone invisibly, Enviroguard is a proven, effective, low-cost, sacrificial anti-graffiti coating that protects porous surfaces without altering their appearance.

Applied by airless sprayer or by a compression pump sprayer in three quick and easily applied coats, Enviroguard protects all porous surfaces invisibly, while allowing them to breathe.

Enviroguard is an aqueous wax emulsion with acrylic polymer for added durability that can cover 10-12 square metres per litre.

It is non-toxic, non flammable, and free of heavy metals and silicones, and is offered in packaged sizes of 5 and 25 litres.

When applying Enviroguard, surfaces should be clean, dry and free of oil and grease. Temperature and relative humidity should be above 5°C and less than 85% respectively, until the product has dried.

Three coats of Enviroguard should be applied by an airless spray using a Graco tip size 4-0011, or by using a compression sprayer with a Hardi or Pegler tip size from 4-110 to 4-114.

A water spray mist on the dried treated surface should bead, with no darkening of the surface area to show that protection is complete.

The manufacturer can contract to apply Enviroguard to areas over 250 square metres if required.


Originally developed to protect stone invisibly, Enviroguard is a proven, effective, low-cost, sacrificial anti-graffiti coating that protects porous surfaces without altering their appearance.

Applied by airless sprayer or by a compression pump sprayer in three quick and easily applied coats, Enviroguard protects all porous surfaces invisibly, while allowing them to breathe.

Enviroguard is an aqueous wax emulsion with acrylic polymer for added durability that can cover 10-12 square metres per litre.

It is non-toxic, non flammable, and free of heavy metals and silicones, and is offered in packaged sizes of 5 and 25 litres.

When applying Enviroguard, surfaces should be clean, dry and free of oil and grease. Temperature and relative humidity should be above 5°C and less than 85% respectively, until the product has dried.

Three coats of Enviroguard should be applied by an airless spray using a Graco tip size 4-0011, or by using a compression sprayer with a Hardi or Pegler tip size from 4-110 to 4-114.

A water spray mist on the dried treated surface should bead, with no darkening of the surface area to show that protection is complete.

The manufacturer can contract to apply Enviroguard to areas over 250 square metres if required.


Anti-graffiti paints and coatings - products from other companies

Anti-graffiti paints and coatings - all companies