These roller shutters are suitable for any size of opening where an acoustic, insulated, secure or weatherproof closure is required.

The system is ideal for loading bays, factories, warehouses and any applications where either security, acoustic performance, thermal insulation, or a combination of these factors is needed.

These insulated rolling shutter doors have been used extensively on projects in the UK and worldwide where their integral strength and robust design assures continued reliability of operation and optimum design life.

Performance characteristics

  • Resistant to wind load: Class 5

  • Thermal resistance: 1.1W /(m²K) at centre / 3.2W/(m²K) at quirks

  • Sound reduction: 18dB Rw

Accreditation

BS EN ISO 10140-2:2010 – Measurements of Airborne Sound Insulation

Applications

  • Loading bays

  • Factories

  • Boiler and turbine halls

  • Recording and TV studios

Standard specification

Operation

Electric operation is by a 400-volt nominal, 3-phase direct drive motor complete with integrated safety brake. Open / close / stop push button controls are incorporated within the low-level control panel. A manual disconnect mechanism and haul chain is provided for use in the event of power failure.

Curtain

Constructed using continuously interlocked 95mm-deep galvanised steel foam bonded insulated laths secured by endlocks.

Bottom rail

An extruded aluminium bottom rail is provided with a rubber weatherstrip.

Side guides

Vertical guides are formed from rolled galvanised steel in a double rebate profile and fitted with twin brush strips. Full height angles are provided for mounting to the structure.

Roller

Constructed from seamless steel tube of adequate diameter to resist deflection and held in bearings attached to the endplate.

Endplates

Formed using prime painted mild steel of thickness to suit the respective opening size and provided with angles for fixing to the structure.

Casings

A galvanised steel coil casing and motor casing are provided as standard to close off the operating mechanism and complete the aesthetic appearance of the door.

Finish

Galvanised steel is the default finish but see options below.

Maximum sizes

10,000mm wide x 10,000mm high (contact the sales team to discuss requirements beyond these dimensions)

Weight

Varies with opening size but approximately 45kg/m².

Options

  • Polyester powder coat finish

  • Plastisol finish to curtain remaining components with polyester powder coat finish

  • Radio controls

  • Radar sensors

  • Time-delayed closure

  • Double-glazed vision panels