Large format with a thin leading edge for a slate-like appearance.

Advantages

  • 40% thinner than standard interlocking tiles

  • Mock-bond creates small format slate-like appearance

  • Excellent covering capacity

  • Can achieve an A+ rating in the BRE Green Guide to Specification*

  • An 'Excellent' certification for BES 6001

  • Available in 3 colours; Anthacite, Smooth Grey, Old English Dark Red

If you like the slim looks of Edgemere, but would prefer the appearance of a smaller format slate, then Duo Edgemere could offer you the perfect solution. The addition of a mock-bond down the centre of the tile combined with a broken bond laying technique, effectively creates this illusion.

Laying smaller format slates can be very expensive and time consuming, but with Duo Edgemere you get the same visual impact with the ease of installation provided by standard interlocking tiles.

With only 9.7 tiles per square metre, Edgemere is a single lap solution, that allows quick and easy installation and is also compatible with our full range of ventilation and dry fix systems. With the ability to perform at pitches as low as 17.5°, Edgemere has the versatility to be used on a wide range of roof types.

All of our concrete interlocking tiles can achieve an 'A+' rating (the lowest environmental impact) in the Building Research Establishment's Green Guide to Specification (* element ref: 812410007, 812410018, 812410049).

Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our concrete interlocking slates can now achieve extra credits under BREEAM and the Home Quality Mark (HQM).

Technical data

  • Size of Tile 420mm x 330mm

  • Minimum Pitch 22.5° Smooth (75mm headlap) 17.5° Smooth (100mm headlap)

  • Maximum Pitch 90°

  • Minimum Headlap 75mm (22.5° and above) 100mm (below 22.5°)

  • Maximum Gauge 345mm

  • Cover Width 298mm (nominal)

  • Covering Capacity 9.7 slates/m at 75mm headlap 10.5 slates/m at 100mm headlap

  • Weight of Tiling 44kg/m² (0.43kN/m²) at 75mm headlap 47.5/m² (0.47kN/m²) at 100mm headlap

  • Battens Required 2.9 lin.m/m² at 75mm headlap 3.1 lin.m/m² at 100mm headlap

  • Batten Size Recommended 38 x 25mm for rafters/supports not exceeding 450mm centres 50 x 25mm for rafters / supports not exceeding 600mm centres

  • Tile Nails 45mm x 3.35mm

  • Hanging length 395mm (nominal)