Riven surface and a thin leading edge for a slate-like appearance.

Advantages

  • Riven surface closely resembles the finish of natural slate

  • 40% thinner than standard interlocking tiles

  • Excellent covering capacity

  • Can achieve an A+ rating in the BRE Green Guide to Specification*

  • Available in 2 colours; Anthracite & Smooth Grey

A randomised texture, on the surface of each tile, ensures an attractive variegated appearance with depth and tone, providing a finish which resembles natural slate.

The latest addition to the a hugely successful range, Riven Edgemere is an affordable, single lap solution, which is easy to install and complemented by a range of ventilation and dry fix systems.

Edgemere offers you the perfect combination: an attractive appearance at a surprisingly attractive price. The clean and precise ‘slate-like' appearance is enhanced by the thin leading edge and a broken-bond laying technique. At only 18mm thick, Edgemere is sleek and greatly increases kerb appeal, providing you with an affordable evolution from standard interlocking tiles.

All of our concrete interlocking tiles can achieve an 'A+' rating (the lowest environmental impact) in the Building Research Establishment's Green Guide to Specification (* element ref: 812410007, 812410018, 812410049).

Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our concrete interlocking slates can now achieve extra credits under BREEAM and the Home Quality Mark (HQM).

Technical data

  • Size of Tile 420mm x 330mm

  • Minimum Pitch 22.5° Smooth (75mm headlap) 17.5° Smooth (100mm headlap)

  • Maximum Pitch 90°

  • Minimum Headlap 75mm (22.5° and above) 100mm (below 22.5°)

  • Maximum Gauge 345mm

  • Cover Width 295mm (nominal)

  • Covering Capacity 9.7 slates/m² at 75mm headlap 10.5 slates/m² at 100mm headlap

  • Weight of Tiling 44kg/m² (0.43kN/m²) at 75mm headlap47.5kg/m² (0.47kN/m²) at 100mm headlap

  • Battens Required 2.9 lin.m/m² at 75mm headlap 3.1 lin.m/m² at 100mm headlap

  • Batten Size Recommended 38 x 25mm for rafters/supports not exceeding 450mm centres 50 x 25mm for rafters/supports not exceeding 600mm centres

  • Tile Nails 45mm x 3.35mm

  • Hanging length 395mm (nominal)