Lintels

Precast concrete specialist manufacturing structural and non-structural building components in plain concrete or cast stone finishes. Arched heads, radius sills, jambs, lintels, mullions and copings are produced to customer specification. Project experience ranges from private and public housing work to contracts for factories, schools and

Manufactures and supplies GRC precast lintels and sills. The products are cast as single, monolithic units thus eliminating the costs associated with cutting and bonding bricks. Brick colours and hues are simulated using inorganic metal oxide pigments, while the joints between facing bricks are recessed to allow on-site pointing. Steel reinforcing

FastArch lightweight lintels are manufactured exclusively for ACS. FastArch lintels are constructed from a concrete exterior with an ultra-lightweight core. The unit is fully sealed and will not de-laminate. All lintels are available with a faced front and soffit. FastArch is available in the following designs: skewed flat arch (215mm & 290mm

Produces cast stone dressings including sills, lintels, copings and cappings, for commercial and residential building work. The units comprise a reconstructed stone facing cast with a concrete core, which can be reinforced with steel rod. The facing mix incorporates a waterproofing element and finishing pigments where appropriate. Dovetail slots

Supply lintels of various sizes including: 6x4" (150x100mm) up to 13' in length; 9x4" (230x100mm) up to 13' in length; 6x5" Boot (150x125mm) up to 13' in length; 9x4" (230x100mm) prestressed in 13'9" and 14'9" lengths; 4x3" (100x75mm) prestressed up to 7'6" in length; 9x6" (230x150mm) up to 13' in length

Manufactures prestressed concrete lintels from lightweight aggregate. The lintels have the high load-bearing capacity of conventional lintels, but weigh less. They are non-corroding, have improved fire resistance and offer good thermal insulation for preventing cold bridges across windows. Available in standard lengths for clear spans of between

Designs and manufactures structural building components and architectural dressings in cast stone. Natural crushed aggregates are used in the production of sills, quoins, column guards, lintels, copings and cappings, to replicate the properties of quarried stone. Standard colours include weathered Cotswold, Yorkstone, Bath, red sandstone, Portland

Produces composite and non-composite lintels for supporting brick and blockwork. Non-composite lintels are designed to take direct imposed loads such as rafters, wall plates and floor joists. Propping is not required with this type of lintel and they do not need brickwork to be bonded to them. They are available in various sizes, including