The top and bottom of each Impact panel section is fitted with a 102mm high aluminium panel. This panel consists of an aluminium extrusion 2mm thick. It is connected into extruded hinge cleats with a 15° off set to facilitate folding. The curtain is made of 152mm wide modules linked together by a continuous aluminium hinge. These hinges hold different curtain designs created by using different infils – in this case 2mm thick Macralon Polycarbonate.
Overhead tracks are manufactured from a strong tempered aluminium alloy class 6351 –T6 extrusion, 34mm wide x 42mm total height.
Lock members are integral 50mm x 32mm standard extruded aluminium hollow posts. They are located at both ends of each grille, at intervals of 2500mm maximum on full height doors and at 1500mm spacing (approx) on counter tops. Additional posts to support curves are supplied as necessary. Lead posts include Adams Rite mortice locks operated by 5-pin cylinders on each side. Intermediate posts incorporate drop bolts locating into flush floor sockets. Drop bolts can be deadlocked with 5 pin cylinders.
Standard finishes for quick delivery of your Impact Folding Shutter are natural anodised, black, white, medium bronze or light bronze powder coat paint. Special colours to match standard RAL colours are available on request.
All products carry a minimum 1 year warranty from date of installation, provided there is no evidence of misuse, abuse or vandalism.