Bars, kiosks and receptions
Aeroflex sliding security shutters are used for bars, kiosks and receptions.
The top and bottom of each Aeroflex panel section is fitted with a 102mm-high aluminium panel consisting of a 2mm-thick aluminium extrusion. It is connected into extruded hinge cleats with a 15° off-set to allow for folding.
The curtain is constructed of 152mm-wide modules linked together by a continuous aluminium hinge. These hinges hold different curtain designs created by using different infills.
Overhead tracks are made from a strong tempered aluminium alloy class 6351 –T6 extrusion, 34mm wide x 42mm total height.
Lock members are integral 50 x 2mm standard extruded aluminium hollow posts. They are located at either end of each grille, at intervals of 2500mm maximum on full height doors and at 1500mm spacing (approx) on counter tops.
Additional posts to support curves are supplied where necessary. Lead posts incorporate Adams Rite mortice locks operated by 5-pin cylinders on each side. Intermediate posts include drop bolts locating into flush floor sockets. Drop bolts can be deadlocked with 5-pin cylinders.
All products carry a minimum 1-year warranty from date of installation, unless there is evidence of misuse, abuse or vandalism.