|Methods of application||
Any BS 4800 colour
Any NCS colour
Any RAL colour
|No. of coats required||
7.5-10 (depending on substrate)
|Recoat time (hours)||
|Container size (litres)||
2.5 and 5 (two pack)
One of the toughest polyurethane coating system available, Armourglaze™, from the Wallglaze range, will withstand rigorous cleaning with fumigants, peroxides and other aggressive chemical cleaners.
CS Armourglaze™ is highly durable, abrasion resistant and anti-microbial, making it suitable for use in cutting-edge research laboratory conditions as well as mortuaries.
Typical healthcare application areas include Category 3 and 4 ACDP cleanrooms/labs (with optional fibreglass reinforcement), mortuaries, plant rooms and chemical stores.
CS Armourglaze™ is extremely resistant to a wide range of chemicals and solvents used in the removal of graffiti, fumigation (using Formaldehyde or Vapourised Hydrogen Peroxide) and decontamination processes including Hydrochloric Acid (10%); Sulphuric Acid (10%); Nitric Acid (10%); Formic Acid (10%); Caustic Soda (10%); Formaldehyde (40%); Benzyl Alcohol; water and steam. It also inhibits the growth of bacteria and fungi on its surface.
Scrub resistance (tested to ASTM D2486): 4000+ cycles. Abrasion resistance (tested to ASTM D1044, D3389): 6000 cycles.
The system will withstand repeated cleaning with alkaline detergents, antiseptics and fumigation treatments without any degradation to surface or performance.
CS Armourglaze™ is available in a Satin or Gloss finish. It can be supplied in any BS 4800, RAL Classic and NCS 2nd series colour as standard. Colours can also be matched to project requirements.