Type Permanent
Composition Solvent based
Substrates Bricks
Ceramics
Concrete
Masonry
Metals
Paint
Stonework
Timber
Application Brush applied
Roller applied
Spray applied
No. of coats required 1
Coverage (m2/litre) 8-10
Touch dry (hours) 1-2
Fully cured time (days) 6
Container size (litres) 5 litres
 
 
 

Nu-Guard® AG Clear is an anti-graffiti coating system for protecting exterior substrates against graffiti and fly-posting. The clear single pack urethane-based coating cures to a hard finish. Graffiti is washed away using warm soapy water and will not leave any ghosting.

  • Single pack external anti-graffiti coating
  • Effective protection against fly-posting and graffiti
  • Clear semi-matt or gloss finishes
  • A one coat application curing to a hard finish
  • Graffiti removed using warm soapy water with zero ghosting
  • No reapplication required

Applications

Nu-Guard® AG is effective on:

  • Aluminium Siding
  • Fibreglass
  • Glass
  • Masonry (includes brick, marble, stone, tile, granite, and concrete)
  • Metal
  • Street Signs
  • Stucco
  • Utility Boxes
  • Vinyl Siding
  • Wood

Properties

  • UV resistant
  • Weatherproof
  • Chemical resistant
  • Provides up to 12-years protection

Appearance

Gloss or semi-matt fiinishes available:

  • Nu-Guard® AG Clear Gloss
  • Nu-Guard® AG Clear Semi Matt

Preparation

Ensure surfaces to be treated are clean, free from contamination and dry. To prevent concrete surfaces darkening when using clear and/or application is to very porous surfaces, it is advisable to apply one coat of Nu-Guard WB Concrete Sealer. Glazed tiles and other dense surfaces should be first primed with Nu-Guard AG Adhesion Promoter.

Application

Apply Nu-Guard AG by brush, roller or spray at a rate of 8 - 10m² per litre. In most instances one coat should be sufficient, however there may be instances where a second coat is required. Do not be apply at temperatures below 5ºC or when the relative humidity exceeds 85%.

Coverage

1 coat @ 8-10 m2/litre

Pack size

Supplied in 2.5 or 5 litre containers


Nu-Guard® AG Clear is an anti-graffiti coating system for protecting exterior substrates against graffiti and fly-posting. The clear single pack urethane-based coating cures to a hard finish. Graffiti is washed away using warm soapy water and will not leave any ghosting.

  • Single pack external anti-graffiti coating
  • Effective protection against fly-posting and graffiti
  • Clear semi-matt or gloss finishes
  • A one coat application curing to a hard finish
  • Graffiti removed using warm soapy water with zero ghosting
  • No reapplication required

Applications

Nu-Guard® AG is effective on:

  • Aluminium Siding
  • Fibreglass
  • Glass
  • Masonry (includes brick, marble, stone, tile, granite, and concrete)
  • Metal
  • Street Signs
  • Stucco
  • Utility Boxes
  • Vinyl Siding
  • Wood

Properties

  • UV resistant
  • Weatherproof
  • Chemical resistant
  • Provides up to 12-years protection

Appearance

Gloss or semi-matt fiinishes available:

  • Nu-Guard® AG Clear Gloss
  • Nu-Guard® AG Clear Semi Matt

Preparation

Ensure surfaces to be treated are clean, free from contamination and dry. To prevent concrete surfaces darkening when using clear and/or application is to very porous surfaces, it is advisable to apply one coat of Nu-Guard WB Concrete Sealer. Glazed tiles and other dense surfaces should be first primed with Nu-Guard AG Adhesion Promoter.

Application

Apply Nu-Guard AG by brush, roller or spray at a rate of 8 - 10m² per litre. In most instances one coat should be sufficient, however there may be instances where a second coat is required. Do not be apply at temperatures below 5ºC or when the relative humidity exceeds 85%.

Coverage

1 coat @ 8-10 m2/litre

Pack size

Supplied in 2.5 or 5 litre containers


 
 
 
Downloads
  • Hydron anti-graffiti and protective floor and wall coatings
    Hydron anti-graffiti and protective floor and wall coatings
    2pp 1.5 MB
    Download
  • Nu-Guard AG Clear Technical data sheet
    Nu-Guard AG Clear Technical data sheet
    1pp 222.93KB
    Download
  • Nu-Guard AG anti-graffiti coating
    Nu-Guard AG anti-graffiti coating
    4pp 627.46KB
    Download
 
 
 
Enquire
 


Related entries

  • Hydron Protective Coatings: Nu-Cryl AG Extra - anti-graffiti coating for dense walls
    Nu-Cryl AG Extra - anti-graffiti coating for dense walls
    Hydron Protective Coatings
    Nu-Cryl® AG Extra (HPC 46) is a clear, hydrophobic impregnation, anti-graffiti coating system. It is designed for use on dense, non-porous substrates such as external walls made of granite, marble, brick, polished concrete...

Also by Hydron Protective Coatings

Hydron Protective Coatings address and contact details

Hydron Protective Coatings Ltd
Unit 7, Phoenix Road Industrial Estate
Phoenix Road
Wednesfield
Wolverhampton
WV11 3PX
Tel: 01902 450950
Fax: 01902 451050
View on map
 
Follow Hydron Protective Coatings
 
Not found what you're looking for? View other options

Ask Hydron Protective Coatings about

Nu-Guard® AG Clear – exterior anti-graffiti coating