Fire / smoke protection Fire
Smoke
Operation Powered
Applications Stairwells
Fire rating (minutes) EW120S
Curtain span (m) 8m max
Maximum drop (m) 6m
 
 
 

The Smoketight S fire curtain from Bolton Gate provides not only 2-hour fire integrity between fire compartments but also provides a smoketight seal in accordance with EN 1634-3.

Successfully fire-tested to EN 1634-1, the Fibreroll S rolling fire curtain offers major advantages over other types of fire curtain since it incorporates reduced radiation in addition to keeping fire and smoke at bay.

The curtain has a fire rating of EW120S in accordance with EN 13501-2.

Standard specification

Curtain

Specially reinforced and coated fibre-glass material which is designed to withstand temperatures in excess of 1000°C.

Curtain thickness approximately 0.6mm; weight 665 grams per square metre.

A steel bottom rail is attached to provide rigidity and act as a weight to assist closure.

Guides

Manufactured from galvanised steel and formed into a slimline profile 100 x 50mm which is prepared for bolting to the opening structure. An integral sealing arrangement is incorporated to prevent the passage of smoke around the edges of the curtain.

Roller

The roller comprises a 102mm diameter steel tube in which the tubular motor is fitted at one end and steel shafts / discs at the other. The roller is supported at each end on galvanised steel endplates with integral angles for fixing to the bulkhead.

Casing

The roller is covered by a galvanised steel casing which also acts as a fire seal in the head and is 230 x 230mm with an integral smoke seal.

Maximum size

8m wide x 6m high

Operation

The curtain is electrically operated by a 240 volt single phase tubular motor and is supplied with a high-level control panel to be connected (wiring by others) to a normally-closed volt-free contact within the building’s fire alarm panel.

This system requires a 240 volt single phase 3–pin socket within 1m of the control panel; this supply must be installed prior to the installation of the curtains.

The system is failsafe and should the mains supply fail, the curtain closes by gravity.

Finishes

The curtain is self-finished in grey one side, silver the other side with the side guides and roller casing galvanised as standard. Metalwork is also available in a polyester powder-coated finish in a wide range of RAL colours.

Weight

Approximately 30kg per linear metre of width.


The Smoketight S fire curtain from Bolton Gate provides not only 2-hour fire integrity between fire compartments but also provides a smoketight seal in accordance with EN 1634-3.

Successfully fire-tested to EN 1634-1, the Fibreroll S rolling fire curtain offers major advantages over other types of fire curtain since it incorporates reduced radiation in addition to keeping fire and smoke at bay.

The curtain has a fire rating of EW120S in accordance with EN 13501-2.

Standard specification

Curtain

Specially reinforced and coated fibre-glass material which is designed to withstand temperatures in excess of 1000°C.

Curtain thickness approximately 0.6mm; weight 665 grams per square metre.

A steel bottom rail is attached to provide rigidity and act as a weight to assist closure.

Guides

Manufactured from galvanised steel and formed into a slimline profile 100 x 50mm which is prepared for bolting to the opening structure. An integral sealing arrangement is incorporated to prevent the passage of smoke around the edges of the curtain.

Roller

The roller comprises a 102mm diameter steel tube in which the tubular motor is fitted at one end and steel shafts / discs at the other. The roller is supported at each end on galvanised steel endplates with integral angles for fixing to the bulkhead.

Casing

The roller is covered by a galvanised steel casing which also acts as a fire seal in the head and is 230 x 230mm with an integral smoke seal.

Maximum size

8m wide x 6m high

Operation

The curtain is electrically operated by a 240 volt single phase tubular motor and is supplied with a high-level control panel to be connected (wiring by others) to a normally-closed volt-free contact within the building’s fire alarm panel.

This system requires a 240 volt single phase 3–pin socket within 1m of the control panel; this supply must be installed prior to the installation of the curtains.

The system is failsafe and should the mains supply fail, the curtain closes by gravity.

Finishes

The curtain is self-finished in grey one side, silver the other side with the side guides and roller casing galvanised as standard. Metalwork is also available in a polyester powder-coated finish in a wide range of RAL colours.

Weight

Approximately 30kg per linear metre of width.


Interested in this product?
Call 01204 871037
OR
 
 
 
Downloads
  • Fibreroll S Smoketight fire curtain
    Fibreroll S Smoketight fire curtain
    2pp 620.25KB
    Download
  • Fibreroll S Smoketight fire curtain NBS Specification
    Fibreroll S Smoketight fire curtain NBS Specification
    1pp 59.32KB
    Download
 
 
 
Enquire
 


Also by Bolton Gate Company

Bolton Gate Company address and contact details

Bolton Gate Company Ltd
Waterloo Street
Bolton
BL1 2SP
Tel: 01204 871037
Fax: 01204 871049
View on map
 
 
Not found what you're looking for? View other options

Ask Bolton Gate Company about

Fibreroll S Smoketight fire curtain