Type Clear coatings / sealants
Substrates Concrete
 
 
 

Newton 906 Lime Inhibitor is used to prevent the ‘leaching’ of free lime from concrete, and is applied to concrete surfaces before the installation of a Newton System 500 cavity drain membrane waterproofing system.

Newton 906 Lime Inhibitor is designed to be used mainly with new concrete structures, but should also be used to treat cut recesses in existing concrete slabs.

Benefits

  • Solvent and caustic free
  • Easy to use and handle
  • Non-hazardous on dilution
  • Compatible with alkaline substrates
  • Long term durability

Applications

For concrete floors newer than 12 months, it should be used on the whole concrete slab or raft as well as the recess formed, ready for Newton Basedrain or Floordrain Drainage Conduit.

For concrete floors older than 12 months, it should be used on the recess cut into the concrete ready for Newton Basedrain or Floordrain Drainage Conduit as well as on a 200mm are either side of floor construction or movement joints.

For walls, it should be used to a height of 200mm from the floor, or where a ‘kicker’ has been formed to a concrete wall and applied from the floor up to 200mm above the kicker.

Underpinned properties will require application to 200mm either side of the joints. Dry-packed areas should be sealed with a cement based tanking product and then the tanking treated with Newton Lime Inhibitor.


Newton 906 Lime Inhibitor is used to prevent the ‘leaching’ of free lime from concrete, and is applied to concrete surfaces before the installation of a Newton System 500 cavity drain membrane waterproofing system.

Newton 906 Lime Inhibitor is designed to be used mainly with new concrete structures, but should also be used to treat cut recesses in existing concrete slabs.

Benefits

  • Solvent and caustic free
  • Easy to use and handle
  • Non-hazardous on dilution
  • Compatible with alkaline substrates
  • Long term durability

Applications

For concrete floors newer than 12 months, it should be used on the whole concrete slab or raft as well as the recess formed, ready for Newton Basedrain or Floordrain Drainage Conduit.

For concrete floors older than 12 months, it should be used on the recess cut into the concrete ready for Newton Basedrain or Floordrain Drainage Conduit as well as on a 200mm are either side of floor construction or movement joints.

For walls, it should be used to a height of 200mm from the floor, or where a ‘kicker’ has been formed to a concrete wall and applied from the floor up to 200mm above the kicker.

Underpinned properties will require application to 200mm either side of the joints. Dry-packed areas should be sealed with a cement based tanking product and then the tanking treated with Newton Lime Inhibitor.


 
 
 
Downloads
  • Newton 906 Lime Inhibitor (LC1) Data Sheet
    Newton 906 Lime Inhibitor (LC1) Data Sheet
    2pp 226.02KB
    Download
 
 
 
Enquire
 

Related entries

  • Newton System 500 waterproofing, listed barn conversion
    Newton Waterproofing
    The client required high grade structural waterproofing for a listed farmhouse barn conversion undergoing extensive renovations. Part of the renovation involved lowering the inside floor level to gain head height. Once the floor...
  • Newton Waterproofing: Basement waterproofing for London School of Economics
    Basement waterproofing for London School of Economics
    Newton Waterproofing
    Newton Specialist Contractor Cast Contracting Ltd was appointed to design, supply and install a waterproofing solution for the basement of the Marshall Building at 44 Lincoln's Inn Fields, part of the London School of Economics.
  • Newton Waterproofing: Waterproofing a listed Thames riverside property
    Waterproofing a listed Thames riverside property
    Newton Waterproofing
    Newton Waterproofing products were used to waterproof the subterranean living space in this listed riverside property refurbishment. Situated just a few metres from the River Thames, this project was in a high risk area

Also by Newton Waterproofing

Newton Waterproofing address and contact details

Newton Waterproofing Systems Ltd
Newton House
17-20 Sovereign Way
Tonbridge
TN9 1RH
Tel: 01732 360095
View on map
 
Follow Newton Waterproofing
 
Not found what you're looking for? View other options