Suitability Floors
Walls
Material High density polyethylene
Fixing Mechanically fixed
Product accreditation BBA certified
Thickness (mm) 0.6
Roll dimensions (w x l) 2 x 20m
 
 
 

DELTA® FM is a 3mm damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve damp pressure equalisation.

Various floor finishes can be achieved with zero ‘down time’ with this fast-track application.

DELTA® FM can be used in new build, remedial or refurbishment projects for floors, and walls.

DELTA® FM can also be used in conjunction with thermal installation, sound insulation and many types of underfloor heating systems.

This membrane is used as damp-proofing on walls, floors and vaulted ceilings, above and below ground. It can be used in new construction or in existing buildings over a contaminated or damp background.

Dry lining, screed or flooring support

It can support a dry lining, screed or flooring, in the following situations:

  • On damp walls and floors in underground situations subject to high groundwater levels, and perennial moisture
  • On vaulted ceilings of archways or cellars subject to water ingress
  • In conjunction with a remedial dpc system where the walls and floors have a high salt content
  • Where it is necessary to complete the installation immediately without allowing a period for initial drying
  • Over walls and floors with friable or painted surfaces
  • Over walls and floors with oil or mould contamination
  • Over walls and floors with a high salt content
  • As a waterproofing membrane in areas subject to vibration.

Other uses

Depending on the application required and the site conditions, the membrane may be used as:

  • An underfloor damp-proof membrane
  • A dry lining for walls, ventilated into the room via aeration slots at the top and bottom of the wall or via passive air vents, where access through an external wall is available
  • A sealed system covering wall, floor and ceiling with provision made for disposing of water build-up behind the membrane via a sump and pump.

Specification

  • Product code: DMS023
  • Material: high-performance high-density polyethylene
  • Temperature resistance: -30°C / +80°C
  • Thickness: approx. 0.6mm
  • Stud height: approx. 3mm
  • Roll size: 2 x 20m
  • Compressive strength: approx 140 kN/m2
  • Chemical properties: excellent chemical resistance; no root penetration; rot-proof; approved for drinking water applications
  • Behaviour in fire: Class E


DELTA® FM is a 3mm damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve damp pressure equalisation.

Various floor finishes can be achieved with zero ‘down time’ with this fast-track application.

DELTA® FM can be used in new build, remedial or refurbishment projects for floors, and walls.

DELTA® FM can also be used in conjunction with thermal installation, sound insulation and many types of underfloor heating systems.

This membrane is used as damp-proofing on walls, floors and vaulted ceilings, above and below ground. It can be used in new construction or in existing buildings over a contaminated or damp background.

Dry lining, screed or flooring support

It can support a dry lining, screed or flooring, in the following situations:

  • On damp walls and floors in underground situations subject to high groundwater levels, and perennial moisture
  • On vaulted ceilings of archways or cellars subject to water ingress
  • In conjunction with a remedial dpc system where the walls and floors have a high salt content
  • Where it is necessary to complete the installation immediately without allowing a period for initial drying
  • Over walls and floors with friable or painted surfaces
  • Over walls and floors with oil or mould contamination
  • Over walls and floors with a high salt content
  • As a waterproofing membrane in areas subject to vibration.

Other uses

Depending on the application required and the site conditions, the membrane may be used as:

  • An underfloor damp-proof membrane
  • A dry lining for walls, ventilated into the room via aeration slots at the top and bottom of the wall or via passive air vents, where access through an external wall is available
  • A sealed system covering wall, floor and ceiling with provision made for disposing of water build-up behind the membrane via a sump and pump.

Specification

  • Product code: DMS023
  • Material: high-performance high-density polyethylene
  • Temperature resistance: -30°C / +80°C
  • Thickness: approx. 0.6mm
  • Stud height: approx. 3mm
  • Roll size: 2 x 20m
  • Compressive strength: approx 140 kN/m2
  • Chemical properties: excellent chemical resistance; no root penetration; rot-proof; approved for drinking water applications
  • Behaviour in fire: Class E


Interested in this product?
Call 01992 523523
OR
 
 
 
Downloads
  • DELTA®-FM BBA certificate
    DELTA®-FM BBA certificate
    10pp 1.24MB
    Download
 
 
 
Enquire
 


Related entries

  • Delta Membrane Systems: Flood resilience project for historic cottage
    Flood resilience project for historic cottage
    Delta Membrane Systems
    An historic stone cottage in Oxfordshire suffered from periodic flooding due to rain water bearing against the external stone wall as external roads are higher than the kitchen floor slab. Delta Membrane Systems were able to...
  • Delta Membrane Systems: Waterproofing membranes – virgin or recycled plastic?
    Waterproofing membranes – virgin or recycled plastic?
    Delta Membrane Systems
    Waterproofing membranes made from virgin HDPE are generally a more sustainable option than membranes made from recycled plastics if you need long-term performance. Some membranes made from virgin High-Density Polyethylene...
  • Delta Membrane Systems: Delta shortlisted for two leading industrial awards
    Delta shortlisted for two leading industrial awards
    Delta Membrane Systems
    Type C cavity drain manufacturer, Delta Membrane Systems Ltd, has been shortlisted for 'Technical Innovation' and 'Technical Excellence' in the prestigious Ground Engineering Awards 2018. Before the awards ceremony in June,...

Also by Delta Membrane Systems

Delta Membrane Systems address and contact details

Delta Membrane Systems Ltd
DELTA House
Merlin Way
North Weald
Epping
CM16 6HR
Tel: 01992 523523
Fax: 01992 523250
View on map
 
Follow Delta Membrane Systems
 
Not found what you're looking for? View other options

Ask Delta Membrane Systems about

DELTA® FM 3mm cavity damp proof floor and wall membrane