A post-construction impregnator for natural stone, porcelain and precast concrete paving elements. Forming a transparent and breathable finish to the paving unit to which oil, grease and debris are unable to adhere too.
Creates an easy-to-clean pavement surface enabling moisture vapour to pass through normally. Paving is easier to clean, reducing long-term maintenance costs. No change to surface structure, appearance, slip resistance or colour.
How it works:
StainProtect Profi bonds tenaciously within the pores beneath a pavement surface, forming a transparent and breathable, highly resilient subsurface system to which oil, grease, dirt and even chewing gum are unable to adhere strongly to. This creates an easy-to-clean pavement surface through which moisture vapour can pass normally. The paving is simply easier to clean which reduces long-term maintenance costs.
For all-natural, man-made and polished acid-resistant paving elements
Interior and exterior use
Resin, polymer & solvent-free
Colour: slightly yellow
pH Value: ~5,6
Density: 1.1 g/cm³ at 20°C
1-litre plastic bottles
5-litre plastic bottles
10-litre plastic bottles
Store in the original sealed container in a cool/frost-free place for up to 12 months after purchase.
Approximately 5 - 10 m² / Litre.
Apply 1-2 coats max. depending on paving unit porosity.
How to use:
Test a small area beforehand to ensure the finished result is satisfactory.
WEISS Stain Protect Pro is applied to the upper surface of clean, stain-free, dry paving elements to protect against day-to-day staining.
Do not dilute.
Apply when the surface is between 5-25°C.
Apply evenly using a 4" to 6" brush, sponge or paint roller to a dry and clean surface.
Avoid coating sides and base of paving element.
Remove excess liquid using a cloth or squeegee.
Treated surfaces may be walked on after 2 hours.
Full protection develops within 2-4 days.
Previously known as Weiss Stain Protect Profi.