Damp / water protection products on BUILDING DESIGN. Helping you find the best product for your project.
1-15 of 174
  • Marldon UK: Marldon MXS140 rapid-curing, solvent free DPM
    Marldon MXS140 rapid-curing, solvent free DPM
    Marldon UK
    Marldon MXS140 is a solvent-free accelerated two-part epoxy-based DPM, which achieves EMICODE EC1 status. Advantages: single-coat DPM up to 97% RH; accelerated curing in 3-4 hours at 20°C; visual control - gunmetal grey...
  • Delta Membrane Systems: DELTA sealed structural waterproofing systems
    DELTA sealed structural waterproofing systems
    Delta Membrane Systems
    DELTA sealed systems are recommended for below ground waterproofing where soil is retained, for example, basements and vaults. Membrane selection depends on the required finish and flow rate if applicable. All membrane...
  • Delta Membrane Systems: Koster Repair Mortar NC
    Koster Repair Mortar NC
    Delta Membrane Systems
    Koster Repair Mortar NC can be used for structurally relevant repair and touch up of voids and for levelling of concrete defects. Repair Mortar NC is a repair mortar and plaster with excellent workability. It has a high...
  • Delta Membrane Systems: DELTA® MS-500 8mm cavity drain membrane
    DELTA® MS-500 8mm cavity drain membrane
    Delta Membrane Systems
    DELTA® MS-500 is an HDPE, dimpled cavity drain membrane with 8mm studs designed as a seepage layer for damp-proofing applications. DELTA® MS-500 cavity drain membranes can be used for waterproofing above and below ground on...
  • Delta Membrane Systems: Koster KB-Fix 5
    Koster KB-Fix 5
    Delta Membrane Systems
    Koster KB-Fix 5 is an extremely fast setting waterproof and weatherproof mortar. Koster KB-Fix 5 is intended for swift filling of holes and cracks in plaster and masonry, for anchoring wall anchors, anchor fittings, brackets...
  • Delta Membrane Systems: Flexi Dri Plus Plug
    Flexi Dri Plus Plug
    Delta Membrane Systems
    Flexi Dri Plus Plugs are handy hammer-in fixings which contain an expandable waterproof seal for use with cavity drain membranes for use on multiple substrates. The Flexi Dri Plus Plug offers a bellows action, meaning it can...
  • Delta Membrane Systems: DELTA® FM 3mm cavity damp proof floor and wall membrane
    DELTA® FM 3mm cavity damp proof floor and wall membrane
    Delta Membrane Systems
    DELTA® FM is a 3mm damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve...
  • Delta Membrane Systems: KÖSTER KSK SY 15 self adhesive bitumen membrane
    KÖSTER KSK SY 15 self adhesive bitumen membrane
    Delta Membrane Systems
    KÖSTER KSK SY 15 consists of a highly tear resistant, 2-layer cross- laminated, polyethylene foil with a plastic bitumen / rubber adhesive- and sealing-compound. It is cold applied and therefore no hot air or propane gas...
  • Marldon UK: KINGLEY K-250 DPM damp proofing membrane 100m2 roll
    KINGLEY K-250 DPM damp proofing membrane 100m2 roll
    Marldon UK
    A 250-micron thick, blue polythene damp-proof membrane. Extra strength, multipurpose. 4x25m roll = 100m² coverage per roll.
  • Delta Membrane Systems: DELTA® PT waterproof membrane
    DELTA® PT waterproof membrane
    Delta Membrane Systems
    DELTA® PT is a high-performance polyethylene membrane that has been specially designed with damp control in mind. It is used to insulates and isolate damp and contaminated walls, vaults, and basements. DELTA® PT is...
  • Delta Membrane Systems: DELTA® PT damp proof & waterproofing membrane
    DELTA® PT damp proof & waterproofing membrane
    Delta Membrane Systems
    Delta® PT is a high-performance polyethylene membrane that has been specially designed with damp control in mind. It is used to insulates and isolate damp and contaminated walls, vaults, and basements. Delta® PT is...
  • Delta Membrane Systems: DELTA® PT-Lath 8mm cavity meshed membrane
    DELTA® PT-Lath 8mm cavity meshed membrane
    Delta Membrane Systems
    The DELTA® PT-Lath high performance polyethylene meshed membrane is used for above and below ground waterproofing and damp-proofing internal and external walls, vaulted ceilings. It can be used in new constructions or in...
  • Delta Membrane Systems: DELTA ventilated damp proofing systems
    DELTA ventilated damp proofing systems
    Delta Membrane Systems
    DELTA ventilated waterproofing systems are recommended for above ground situations or in areas where no free running water is expected, for example where external pavements have been built up. Ventilated system have an air...
  • Delta Membrane Systems: DELTA® PT Slimline 4mm meshed damp proof membrane
    DELTA® PT Slimline 4mm meshed damp proof membrane
    Delta Membrane Systems
    DELTA® PT Slimline is a 4mm meshed damp proofing membrane that is supplied in 1 x 15m rolls, making it ideal for damp-proofing, window reveals or space sensitive areas. It has a fluted / corrugated embossed pattern. DELTA®...
  • Delta Membrane Systems: KÖSTER Deuxan® 2C bitumen external tanking waterproofer
    KÖSTER Deuxan® 2C bitumen external tanking waterproofer
    Delta Membrane Systems
    KÖSTER Deuxan® 2C is a BBA approved primary waterproofer for external tanking. It is a robust, crack-bridging, 2-component, polymer-modified bitumen thick film sealant for waterproofing construction. Designed for the secure...