Articles relating to structural protection on BUILDING DESIGN. Resources to build your knowledge and understanding.
1-15 of 23
  • Waterproofing of contiguous piles
    Delta Membrane Systems
    Contiguous piles have many advantages in the formation of a retaining wall. This method of construction involves the creation of a line of deep bores that are then backfilled with concrete. The advantage of this method of...
  • Combination waterproofing systems
    Delta Membrane Systems
    New-build housing projects require a combination of different types of waterproofing systems, as defined in BS8102:2009 - Protection of Structures Against Water from the Ground (Type A barrier, Type B integrally watertight,...
  • Factors to consider if choosing waterproofing materials
    Delta Membrane Systems
    There is a wide choice of structural waterproofing materials available in the market and it can be difficult to determine the best option for a project. The complexity and competitiveness of the industry brings challenges...
  • Do I really require a Waterproofing Design Specialist?
    Delta Membrane Systems
    Waterproofing design is a complex task. Gone are the days of architects undertaking the role of waterproofing design in a project. Getting the design correct prior to construction will save significant costs. British...
  • Damp-proofing a listed building: what you need to know
    Newton Waterproofing
    Damp-proofing a Grade II listed building Newton Waterproofing staff have been approached with the following question: "I have a Grade II listed building that I intend to convert into habitable space. The age of the building...
  • Damp-proofing versus waterproofing: applications
    Newton Waterproofing
    What is the difference between damp-proofing and waterproofing? Damp-proofing is designed to keep soil moisture out of a structure and waterproofing is designed to keep both soil moisture and liquid water out of a structure.
  • Flood damage strategy and rapid reoccupation
    Newton Waterproofing
    The winter of 2013-14 has been one of the wettest on record and, in many areas of the UK, this has resulted in the flooding of both commercial and domestic properties on a scale not seen before. The post-flood clean-up can...
  • Vapour and air permeable membranes explained
    A Proctor Group
    As Building Regulations are demanding ever higher thermal efficiency in both commercial and domestic sectors, today’s building professional increasingly needs to consider airtightness as a way of improving the thermal...
  • BS 8102:2009 - important new waterproofing regulations
    Newton Waterproofing
    What does BS 8102: 2009 mean to specifiers of structural waterproofing projects? BS 8102 is a design document whose purpose is to inform the designer of the various methods of waterproofing available and to assist in the...
  • How to waterproof a basement conversion
    Newton Waterproofing
    The key to successfully waterproofing a basement conversion is to choose a system that will achieve the degree of waterproofing required for the intended use of the basement. If the basement conversion is going to be used...
  • Tanking membranes versus cavity drain membranes
    Newton Waterproofing
    What is tanking? Tanking is a generic term used to describe various products that are used to deal with water entering a below-ground building. Tanking membranes are one of these products. They are applied to the structure,...
  • Combined waterproofing systems: what you need to know
    Newton Waterproofing
    BS 8102:2009 and combined waterproofing systems As of November 30th 2009, BS 80102:2009 – the code of practice for “The Protection of Below Ground Structures from Water From the Ground" – has been in effect. It incorporates...
  • Radon gas - an introduction
    Timberwise
    Radon is a naturally occurring radioactive gas released through the decay of uranium which is present to some degree in all soils and rock. The amount of gas released varies greatly depending on where you live in the UK and...
  • BS 8102:2009 - structural waterproofing
    Trace Basement Systems
    Introduction BS 8102:2009 is the 'Code of practice for protection of below ground structures against water from the ground'. It is the primary design guide for structural (basement) waterproofing in the UK. Although there...
  • The 'perched' water table and basement waterproofing
    Trace Basement Systems
    The 'water table' is an important concept with regards to how water penetration effects basements and cellars. However, there is an important distinction between the 'perched' water table and the 'true' water table. The...