Structural protection products on BUILDING DESIGN. Helping you find the best product for your project.
121-135 of 273
  • Cavity Trays: Cavi60 MWR 200 cavicheck fire integrity stop
    Cavi60 MWR 200 cavicheck fire integrity stop
    Cavity Trays
    Cavi60 MWR 200 is a compressible fire stop for use in cavity walls. The cavi 60 prefix signifies a 60-minute fire integrity rating for this maximum width range (MWR) cavicloser that may be used in caivities of up to 200mm.
  • Cavity Trays: Cavicloak preformed modular DPC cloaks
    Cavicloak preformed modular DPC cloaks
    Cavity Trays
    Preformed moulded cavicloaks are used within cavity walls and are shaped to exactly fit the construction detail intended. The use of preformed cavicloaks eliminates the need to fabricate on site. These ready-moulded units...
  • RIW: RIW Liquid GM - waterproof gas membrane
    RIW Liquid GM - waterproof gas membrane
    RIW
    RIW Liquid GM is a specially designed gas protection membrane, developed to provide a high performance gas proof and waterproof liquid applied coating. RIW Liquid GM is an elastomeric liquid rubber coating, which is applied...
  • RIW: RIW Flexiseal Pro - liquid-applied waterproof coating
    RIW Flexiseal Pro - liquid-applied waterproof coating
    RIW
    RIW Flexiseal Pro is a two-coat, seamless and fully bonded liquid-applied waterproof coating based on polyurethane technology. RIW Flexiseal Pro cures by drawing moisture from the air to form a highly flexible but durable...
  • RIW: RIW Gas Seal HC - polyethylene hydrocarbon barrier
    RIW Gas Seal HC - polyethylene hydrocarbon barrier
    RIW
    RIW Gas Seal HC is loose laid, robust, flexible 1mm thick linear low-density polyethylene (LLDPE) hydrocarbon barrier. Generally Gas Seal HC is seam welded to form a monolithic membrane, but the laps can also be sealed with...
  • Ronacrete: Monoprufe liquid applied damp-proof membrane
    Monoprufe liquid applied damp-proof membrane
    Ronacrete
    Monoprufe DPM reduces the passage of water vapour and is applied prior to laying thin bonded screeds or proprietary levelling compounds onto suitable substrates. By suppressing residual moisture in concrete floors the...
  • RIW: RIW Heviseal cold-applied bitumen-based UV waterproofing
    RIW Heviseal cold-applied bitumen-based UV waterproofing
    RIW
    RIW Heviseal is a cold-applied, bitumen-based UV stable waterproofing coating filled with fibres and minerals. The DPM dries to form a uniform, UV-resistant and waterproof coating. The product is typically used to provide a...
  • RIW: RIW Plaster Drain - internal drainage membrane
    RIW Plaster Drain - internal drainage membrane
    RIW
    RIW Plaster Drain provides a cavity drainage system, suitable for remedial works, and is used to provide a key for plaster and render finishes. The product is used internally, for waterproofing walls, above or below external...
  • D Adam & Associates: Navy Steel water-based rust primer
    Navy Steel water-based rust primer
    D Adam & Associates
    Navy Steel is a water-based, rust converter and primer for steelwork. It has been widely used in the offshore oil, gas and marine industries for over 25 years, where it has been applied as part of maintenance painting...
  • Cavity Trays: Type WCA cavity closer
    Type WCA cavity closer
    Cavity Trays
    Type WCA closers are insulated units used for wider cavity applications. They are available to suit cavities from 100 to 150mm wide. Type WCA closers have a polystyrene insulating core. They provide a thermally efficient,...
  • RIW: RIW Sheetseal 226 - tanking system / ground floor DPM
    RIW Sheetseal 226 - tanking system / ground floor DPM
    RIW
    RIW Sheetseal 226 is a cold applied, high density polyethylene film (HDPE Sheeting), coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Typically HDPE Sheeting is used as an external...
  • Tremco illbruck: illbruch FF 220 EPDM membrane
    illbruch FF 220 EPDM membrane
    Tremco illbruck
    illbruck FF 220 EPDM membranes are used for weather sealing the exterior side of connecting joints between a window or facade construction and an adjacent structure, such as a wall, concrete panel or steel frame. EPDM-based...
  • Johnstone's Trade: Pliolite® Based Masonry Finish
    Pliolite® Based Masonry Finish
    Johnstone's Trade
    Johnstone's Stormshield Pliolite® Based Masonry Finish is a premium quality, solvent-based paint formulated for exterior applications. The Pliolite® resin enables application at temperatures down to -5°C and becomes...
  • RIW: RIW LAC 2-coat cold-applied bitumen DPM/tanking membrane
    RIW LAC 2-coat cold-applied bitumen DPM/tanking membrane
    RIW
    RIW LAC is a two-coat, cold-applied bitumen damp proofing membrane, which dries to a uniform gloss black finish. It is typically used as a tanking membrane in accordance with BS 8102:2009, as a damp proof membrane to ground...
  • Cavity Trays: SAF fire and acoustic stops
    SAF fire and acoustic stops
    Cavity Trays
    SAF stops are compressible sloping fire and acoustic stops for use in cavity walls. They have a 60-minute fire-integrity rating. They are made from non-combustible rockwool, which is profiled and encapsulated in a polythene...