Structural protection products on BUILDING DESIGN. Helping you find the best product for your project.
1-15 of 274
  • Delta Membrane Systems: Koster Repair Mortar Plus
    Koster Repair Mortar Plus
    Delta Membrane Systems
    Fast setting, expanding repair mortar – Koster Repair Mortar Plus is a watertight, fast setting, slightly expanding repair mortar with excellent adhesion (even to old building material substrates). With the addition of...
  • Delta Membrane Systems: Köster PUR Gel
    Köster PUR Gel
    Delta Membrane Systems
    KÖSTER PUR Gel is a solvent-free, water activated polyurethane gel. Depending on the amount of water added, a highly elastic, waterproof gel or respectively hydro-gel foam is formed. After it has reacted in dilutions up to...
  • Delta Membrane Systems: MemTech Pro LGB liquid-applied gas protection membrane
    MemTech Pro LGB liquid-applied gas protection membrane
    Delta Membrane Systems
    MemTech Liquid Gas Barrier forms a membrane to protect against gas and water ingress when used on new or existing building structures. MemTech LGB is a distinctive green, ready-for-use specialist styrene butadiene...
  • A Proctor Group: Procheck 300 lightweight, reinforced, polyethylene, vcl
    Procheck 300 lightweight, reinforced, polyethylene, vcl
    A Proctor Group
    Procheck 300 is a lightweight, reinforced, polyethylene, vapour control layer for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The...
  • Delta Membrane Systems: DELTA® FM 3mm cavity damp proof floor and wall membrane
    DELTA® FM 3mm cavity damp proof floor and wall membrane
    Delta Membrane Systems
    DELTA® FM is a 3mm damp proofing membrane specifically designed to combat dampness and contamination of floors. The special 3mm low stud profile minimises changes in floor levels while still providing an air gap to achieve...
  • Delta Membrane Systems: DELTA® high performance DPC
    DELTA® high performance DPC
    Delta Membrane Systems
    DELTA® high performance DPC (damp-proof course), is suitable for horizontal and vertical construction applications. DELTA® DPC provides a cost-effective solution to preventing the passage of moisture in brick or block...
  • A Proctor Group: Wraptite air and vapour control barrier
    Wraptite air and vapour control barrier
    A Proctor Group
    Wraptite combines the best properties of a vapour permeable membrane and an air barrier in one innovative, affordable self-adhering product. It fully bonds (without mechanical attachment) to almost any substrate for air...
  • Hydron Protective Coatings: Nu-Guard® Clear AF anti-graffiti coating
    Nu-Guard® Clear AF anti-graffiti coating
    Hydron Protective Coatings
    Nu-Guard Clear AF is a specially formulated single pack external coating designed to give effective protection against fly-posting and graffiti. Posters do not adhere to the surface; once dry they will fall off or can be...
  • A Proctor Group: Procheck 125 lightweight reinforced VCL
    Procheck 125 lightweight reinforced VCL
    A Proctor Group
    Procheck 125 is a lightweight reinforced polyethylene vapour barrier which can be utilised in a variety of commercial applications. Procheck 125 can be utilised where very high moisture vapour resistance is not a necessity...
  • Corden Group: Corden EPS TGB total gas barrier
    Corden EPS TGB total gas barrier
    Corden Group
    The Corden EPS TGB total gas barrier is a high performance, flexible, laminated loose laid sheet barrier designed to overcome the health and safety risks that can be associated with building on land that is contaminated by...
  • A Proctor Group: Procheck 500 vapor control layer (VCL)
    Procheck 500 vapor control layer (VCL)
    A Proctor Group
    Procheck Premier 500 is a strong reinforced polyethylene vapour control layer with good vapour resistance. The woven extruded polypropylene multifilament scrim reinforcing provides improved nail tear resistance. The sheet is...
  • Hydron Protective Coatings: AG4 GEL graffiti remover for porous/non-porous surfaces
    AG4 GEL graffiti remover for porous/non-porous surfaces
    Hydron Protective Coatings
    AG4 GEL is suitable for removing all types of graffiti from brickwork, concrete and stone and other porous surfaces where a longer dwell time is required for effective removal. It is supplied in 5, 10 or 25 litre drums.
  • Corden Group: Corden EPS C02/radon membrane barrier
    Corden EPS C02/radon membrane barrier
    Corden Group
    The Corden EPS C02/radon membrane barrier is a blown, extruded blend of virgin polymer MDPE and LDPE co-polymer. It prevents the transmission of unacceptable levels of harmful gases. The Corden EPS C02/radon membrane barrier...
  • Hydron Protective Coatings: Nu-Cryl AG protective masonry coating
    Nu-Cryl AG protective masonry coating
    Hydron Protective Coatings
    Nu-Cryl® AG is an economical, clear protective coating for brick, stone, concrete and marble. It is an acrylic-based impregnation coating for exterior surfaces. Applied by brush or airless spray it provides protection...
  • Delta Membrane Systems: KÖSTER Deuxan® 2C bitumen external tanking waterproofer
    KÖSTER Deuxan® 2C bitumen external tanking waterproofer
    Delta Membrane Systems
    KÖSTER Deuxan® 2C is a BBA approved primary waterproofer for external tanking. It is a robust, crack-bridging, 2-component, polymer-modified bitumen thick film sealant for waterproofing construction. Designed for the secure...